Modular Plugs, Accessories and Tooling
Modular Plugs, Accessories and Tooling Introducing the New Universal Contact
CommScope
[PDF] Modular Plugs, Accessories and Tooling - Netceed UKuk-store.netceed.com ⺠file ⺠product
792780 NETCONNECT Cat5e RJ45 Modular Plugs Datasheet Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
2016 PRODUCT CATALOG | 5TH EDITION
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
CommScope Modular Plug Portfolio
CommScope offers a vast portfolio of Modular Plugs for a wide variety of applications, performance and cable and conductor styles. Below is a brief explanation of the basics of this portfolio to assist in proper plug selection.
CAT 6A, CAT 6 and CAT 5EMT Modular Plugs
These modular plugs consist of a three-piece design: the modular plug body with contacts; a wire holder to manage the conductors and ensure performance and; a metal strain relief for securing the cable and if used with a shielded cable provides the shielding for the plug. These plugs can be used with shielded or unshielded cables. They are available with 3 different size strain reliefs to handle the range of cable diameters. Each performance level uses slightly different wire holders to achieve the desired performance levels. All three of these plug types utilize the 2153256-1 or 2153257-1 series plug boots. They utilize the Pro-Crimper III Hand Tool (354940-1) with the appropriate die set based on strain relief diameter or Dual Terminator (1320840) with terminating module (791804-X).
CAT 5E, 8-Position Plug
The CAT 5E Modular Plug is a two-piece design consisting of the modular plug body with contacts, and a load bar or wire holder. In this design the strain relief is built into the plug body. If the shielded option is desired, the plug comes with a factory installed wrap around shield. This plug utilizes the 569875, 569876 or 569877 series boot depending upon cable diameter. It utilizes the Pro-Installer tool with the "White" dot die set or Dual Terminator (1320840) with terminating module (1-856196-1).
CAT 5, 8-Position Modular Plug
The CAT 5, 8-position plug is a one-piece design. The plug is also available for use with "round" cable as well as "flat oval" cable. Additionally, it is available in unshielded and shielded utilizing a wrap-around shield. This plug utilizes the same boots as the CAT 5E and the Pro-Installer tool with the "Black" dot die set or Dual Terminator (1320840) with terminating module (856196-2).
6-Position Modular Plug
The 6-position (RJ-11) modular plug is also a one-piece design and is offered in a "standard" design 0.530 inches long and also a "long" version which is 0.895 inches long. The plug is available for round as well as flat oval cable. It is available in unshielded and shielded versions. The 6-postion plug has a unique variety called "small conductor" for use with conductors with thin-wall insulation and overall diameter of 0.029 to 0.034 inches. Lastly, the 6-position plug is available with only 4 or 2 contacts installed. This plug utilizes the Pro-Installer tool with the "standard" plug using the "Blue" dot die set and the "long" using the "Violet" dot die set or Dual Terminator (1320840) with terminating module (856196-1 or -4).
4-Position Modular Plug
The 4-position (telephone handset) modular plug is a one-piece design and is 0.530 inches long and is designed for use with flat-oval cables. It is only available as unshielded. The plug utilizes the "Green" dot die set with the Pro-Installer Tool or Dual Terminator (1320840) with terminating module (856196-3).
3
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Features and Benefits
· True mass displacement termination of jacketed cable with solid or stranded conductors · New Universal contact providing reliable termination of solid or stranded conductors · Available in all performance grades: CAT 6A, CAT 6, CAT 5E, CAT 5 and CAT 3 · Meets or exceeds EIA/TIA and ISO industry performance and specifications · Various positions, number of contacts, housing styles and packaging options available · The most complete line of semiautomatic and manual termination capabilities and tooling low applied cost · Complete line of hand-held tooling available · Available for shielded and unshielded cable, round or flat oval, various cable diameters accommodated · Complete line of accessories such as boots and strain reliefs · Recognized by Underwriters Laboratories Inc, File # E81956 · Certified by Canadian Standards Association Certificate No LR 7189A
Specifications1
Electrical
Voltage:
150 volts AC maximum
Current:
Signal application only, 0.75 ampere maximum
Voltage Proof:
1000 volts AC between contacts
1500 volts AC all contacts connected together with shield
Insulation Resistance: 500 Mega ohms minimum
Mechanical
Durability:
750 mating cycles
Bending:
22N [5 lbs]
Pull (Tensile):
22N [5 lbs]
Flex:
50 cycles (solid conductors) or 250 cycles (stranded conductors)
Torsion:
10N [2.2 lbs]
Environmental
Temperature rating:
-10°C to +60°C
Rapid Temperature:
-40°C to 70°C
Cyclic Damp Heat:
25°C to 65°C @ 93%RH
Mixed Flow Gas:
IEC 60512-11-7 Method 1
Product Specifications:
108-131011
Non-Category Modular Plugs (MP-88, MP-66, MP-44 and MP-1010)
108-131012
Category 6 Modular Plugs (MP-6)
108-131013
Category 6A Modular Plugs (MP-6A)
108-131014
Category 5e Modular Plugs (MP-5E and MP-5EMT)
1 C onsult Product Specification, 108 documents, for exact test conditions and requirements.
4
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
CAT 6A, Shielded, 8-Position Plug (MP-6AS-_-_)
Features
· Each kit includes: -- (1) Modular plug assembly -- (1) Wire holder -- (1) Strain relief
· Cat 6A performance achievable when used with PiMF (Pairs-in-Metal-Foil) constructed cable · Use appropriate-sized Slim-Line Modular Plug Boot (ordered separately)
Ordering Information
Description
Conductor (AWG)1
Insulation OD
Cable Jack OD
Shielded CAT 6A
23-24 Solid 24-26 Stranded
0.035" to 0.043" (0.89 to 1.09 mm)
0.20" to 0.24" (5.1 to 6.0 mm)
0.22" to 0.28" (5.7 to 7.0 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
CAT 6, Shielded, 8-Position Plug (MP-6S-_-_)
Features
· Each kit includes: -- (1) Modular plug assembly -- (1) Wire holder -- (1) Strain relief
· Use appropriate-sized Slim-Line Modular Plug Boot (ordered separately)
Ordering Information
Description
Conductor (AWG)1
Insulation OD
Cable Jack OD
0.18" to 0.22" (4.7 to 5.5 mm)
Shielded CAT 6A
23-24 Solid 24-26 Stranded
0.035" to 0.043" (0.89 to 1.09 mm)
0.20" to 0.24" (5.1 to 6.0 mm)
0.22" to 0.28" (5.7 to 7.0 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag MP-6AS-B-5 (6-2111981-2) MP-6AS-C-5 (6-2111984-2)
500 Per Bag MP-6S-A-5 (6-2111977-2) MP-6S-B-5 (6-2111979-2) MP-6S-C-5 (6-2111989-2)
100 Per Bag MP-6AS-B-1 (6-2111981-3) MP-6AS-C-1 (6-2111984-3)
100 Per Bag MP-6S-A-1 (6-2111977-3) MP-6S-B-1 (6-2111979-3) MP-6S-C-1 (6-2111989-3)
5
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
CAT 5E, Shielded EMT, 8-Position Plug (MP-5EMT-_-_)
Features
· Each kit includes: -- (1) Modular plug assembly -- (1) Wire holder -- (1) Strain relief
· Use appropriate-sized Slim-Line Modular Plug Boot (ordered separately)
Ordering Information
Description
Conductor (AWG)1
Insulation OD
Cable Jack OD
0.18" to 0.22" (4.7 to 5.5 mm)
Shielded EMT CAT 5E
23-24 Solid 24-26 Stranded
0.035" to 0.043" (0.89 to 1.09 mm)
0.20" to 0.24" (5.1 to 6.0 mm)
0.22" to 0.28" (5.7 to 7.0 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag
MP-5EMT-A-5 (6-2111976-2)
MP-5EMT-B-5 (6-2111986-2)
MP-5EMT-C-5 (6-2111988-2)
100 Per Bag
MP-5EMT-A-1 (6-2111976-3)
MP-5EMT-B-1 (6-2111986-3)
MP-5EMT-C-1 (6-2111988-3)
Shielded Slim-Line Modular Plug Boot (MP-Boot-S-SL-_)
Features
· For use with Category 6A/6 and Category 5e EMT modular plugs · Accepts cables with maximum diameters listed · Slim-line design support high-density applications · Transparent boot eliminates need for colored boots to match cable jacket color · Advised to use the smallest boot size possible that will accommodate cable
Ordering Information
Description Shielded Slim-Line Boot
Cable Jack OD
0.18" to 0.24" (4.7 to 6.0 mm)
0.22" to 0.28" (5.7 to 7.0 mm)
1000 Per Bag
MP-Boot-S-SL-AB (2153256-1)
MP-Boot-S-SL-C (2153257-1)
6
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
CAT 5E, 8-Position Plug (MP-5E_-_)
Features
· In-line load bar and wrap-around shield for shielded plugs - Uses Category 5e Boots · Each kit includes
-- (1) Modular plug assembly -- (1) Wire holder · Use appropriate size CAT 5E modular plug boot for cable diameter
Ordering Information
Description
Conductor (AWG)1
Insulation OD
Cable Jack OD
Unshielded CAT 5E Shielded CAT 5E
23-24 Solid 24-26 Stranded
0.035" to 0.039" (0.89 to 0.99 mm)
0.19" to 0.22" (4.8 to 5.6 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag
MP-5EU-5 (6-569278-2)
MP-5ES-5 (6-569550-2)
100 Per Bag
MP-5EU-1 (6-569278-3)
MP-5ES-1 (6-569550-3)
7
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Modular Plug Snagless Boots for Category 5E and 5 Plugs
Features
· For use with Category 5e and 5, 8-position plugs · Three (3) boot sizes for various maximum cable diameters · 1000 boots per box
Ordering Information
Color Black Almond Red Green Blue Yellow Orange White Violet Gray
Max Cable Diameter 0.210" (5.33 mm) 569875-1 569875-2 569875-3 569875-4 569875-5 569875-6 569875-7 569875-8 569875-9 1-569875-0
Max Cable Diameter 0.225" (5.71 mm) 569876-1 569876-2 569876-3 569876-4 569876-5 569876-6 569876-7 569876-8 569876-9 1-569876-0
Max Cable Diameter 0.250" (6.35 mm) 569877-1 569877-2 569877-3 569877-4 569877-5 569877-6 569877-7 569877-8 569877-9 1-569877-0
Slim-Line Modular Plug Boot
Ordering Information
Description Slim-Line Modular Plug Boot, Clear
Max Cable Diameter 0.220" (5.59 mm)
Part Number 2111399-1
Modular Plug Non-Snagless Boots for Category 5E and 5 Plugs
Ordering Information
Color
Black Almond Red Green Blue
Max Cable Diameter 0.240" (6.1 mm) 558211-1 558211-2 558211-3 558211-4 558211-5
Color
Yellow Orange White Violet
Max Cable Diameter 0.240" (6.1 mm) 558211-6 558211-7 558211-8 558211-9
8
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
External Strain Reliefs for Modular Plugs
Features
· Metal strain relief that positively engages plug housing · PRO-CRIMPER Tool and Die Set reference will be noted in tooling section · For use with 8-position Category 5 and 5e Modular Plugs only · RoHS compliant
Ordering Information
Description Not for use with Modular Plug Boots For use with Modular Plug Boots
Part Number 558527-1 558527-3
CAT 5 and 3, 8-Position Plug (MP-88_-_-_)
Features
· Each Kit includes -- (1) Modular plug assembly
· Packaged either 500 or 100 to bag · Use appropriate size modular plug boot for cable diameter
Ordering Information
8-Position Round, Standard
8-Position Flat, Standard
Shielded 8-Position Round, Standard
Description
Conductor (AWG)1
Insulation OD
Cable Type
Cable Jack OD (Max)
Unshielded 8-Position
Shielded 8-Position
24-26 Solid 24-26 Stranded
0.034" to 0.039" (0.86 to 0.99 mm)
Round Flat Oval
Round Flat Oval
0.20" (5.1 mm)
0.10" x 0.35" (2.54 x 8.89 mm)
0.20" (5.1 mm)
0.10" x 0.35" (2.54 x 8.89 mm)
Unshielded 8-Position, Small Conductor
26-28 Solid 26-28 Stranded
0.029" to 0.034" (0.74 to 0.86 mm)
Round Flat Oval
0.20" (5.1 mm)
0.10" x 0.35" (2.54 x 8.89 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag
MP-88U-R-5 (6-557315-2)
MP-88U-F-5 (6-554720-2)
MP-88S-R-5 (6-569530-2)
MP-88S-F-5 (6-569542-2)
MP-88U-RS-5 (6557961-2)
MP-88U-FS-5 (6557972-2)
100 Per Bag
MP-88U-R-1 (6-557315-3)
MP-88U-F-1 (6-554720-3)
MP-88S-R-1 (6-569530-3)
MP-88S-F-1 (6-569542-3)
MP-88U-RS-1 (6-557961-3)
MP-88U-FS-1 (6-557972-3)
9
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Keyed CAT 5 and 3, 8-Position (MP-88_-R-1-K)
Small key on side of plug to interface with slot in jack.
Ordering Information
Description
Conductor (AWG)1
Insulation OD
Cable Type
Unshielded Keyed, 8-Position
Shielded Keyed, 8-Position
24-26 Solid 24-26 Stranded
0.034" to 0.039" (0.86 to 0.99 mm)
Round
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
Cable Jack OD (Max)
0.20" (5.1 mm)
100 Per Bag
MP-88U-R-1-K (6-554170-3)
MP-88S-R-1-K (6-569533-3)
10
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
6-Position Plugs (MP-66_-_-_)
Ordering Information
6-Position, Round, Standard
6-Position, Round, Long
6-Position, Flat, Standard
Description
Unshielded 6-Position, Standard Body
Conductor (AWG)1
Insulation OD
Unshielded 6-Position, Long Body
24-26 Solid 24-26 Stranded
0.034" to 0.039" (0.86 to 0.99 mm)
Shielded 6-Position, Long Body
Unshielded 6-Position, Small Conductor, Standard Body
26-28 Solid 26-28 Stranded
0.029" to 0.034" (0.74 to 0.86 mm)
Cable Type Round
Flat Oval Round
Flat Oval Round
Flat Oval
Flat Oval
Cable Jack OD (Max)
0.18" (4.6 mm)
0.09" x 0.26" (2.29 x 6.61 mm)
0.195" (4.96 mm)
0.11" x 0.27" (2.79 x 6.85 mm)
0.195" (4.96 mm)
0.11" x 0.27" (2.79 x 6.85 mm)
0.09" x 0.26" (2.29 x 6.61 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag
MP-66U-R-5 (6-554710-2)
MP-66U-F-5 (6-641337-2)
MP-66U-LR-5 (6-555177-2)
MP-66U-LF-5 (6-555176-2)
MP-66S-LR-5 (6-555175-2)
MP-66S-LF-5 (6-555174-2)
MP-66U-FS-5 (6-557971-2)
100 Per Bag
MP-66U-R-1 (6-554710-3)
MP-66U-F-1 (6-641337-3)
MP-66U-LR-1 (6-555177-3)
MP-66U-LF-1 (6-555176-3)
MP-66S-LR-1 (6-555175-3)
MP-66S-LF-1 (6-555174-3)
MP-66U-FS-1 (6-557971-3)
11
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
6-Position, 4- or 2-Contact Plugs (MP-6_ _-_-_) Ordering Information
Description
Conductor (AWG)1
Insulation OD
Cable Type
Cable Jack OD (Max)
Unshielded 6-Position, 4-Contacts
Unshielded 6-Position, 2-Contacts
24-26 Solid 24-26 Stranded
26-28 Solid 26-28 Stranded
0.034" to 0.039" (0.86 to 0.99 mm)
0.029" to 0.034" (0.74 to 0.86 mm)
24-26 Solid 24-26 Stranded
0.034" to 0.039" (0.86 to 0.99 mm)
Flat Oval
0.09" x 0.26" (2.29 x 6.61 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag
MP-64U-F-5 (6-641335-2)
MP-64U-FS-5 (6-557965-2)
MP-62U-F-5 (6-641333-2)
100 Per Bag
MP-64U-F-1 (6-641335-3)
MP-64U-FS-1 (6-557965-3)
MP-62U-F-1 (6-641333-3)
4-Position Plug (MP-44U-_-_)
Ordering Information
Description
Conductor (AWG)1
Insulation OD
Cable Type
Cable Jack OD (Max)
Unshielded 4-Position, Headset
24-26 Solid 24-26 Stranded
0.034" to 0.039" (0.86 to 0.99 mm)
Round Flat Oval
0.11" (2.8 mm)
0.09" x 0.19" (2.29 x 4.83 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag
MP-44U-R-5 (6-569031-2)
MP-44U-F-5 (6-641334-2)
100 Per Bag
MP-44U-R-1 (6-569031-3)
MP-44U-F-1 (6-641334-3)
10-Position Plug (MP-1010U-R-_)
Ordering Information
Description
Unshielded 10-Position
Conductor (AWG)1
Insulation OD
24-26 Solid 24-26 Stranded
0.034" to 0.039" (0.86 to 0.99 mm)
Cable Type Round
Cable Jack OD (Max)
0.21" (5.3 mm)
1 Typical conductor size supported by insulation OD. Insulation OD is the determining specification
500 Per Bag
MP1010U-R-5 (6-557963-2)
100 Per Bag
MP1010U-R-1 (6-557963-3)
12
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Base Terminator: 1320840-1 (115 Vac, 60 Mhz) ModPlug Dual Terminator Fast Facts
Features
· Pneumatically powered, foot pedal actuated · Terminate two connectors at the same time · Programmable tester -- Check for shorts and opens as product is terminated. Program
tester for individual positions or crossovers. · Terminate up to 200 dual-ended cables/hr · Interchangeable die sets -- Easy changeover die sets for your particular product. Die
sets have been designed to terminate all CommScope modular plug products · Steel die sets for long life · Fully adjustable, primary strain relief, secondary strain relief and contact height · Lightweight (36 lbs) design makes the press easy to move within work center · Rental and purchase options available · Compact size -- 8" x 8" x 10½" tall · 1-year limited warranty · CommScope plugs are UL approved when terminated using this tool and the
procedures outlined in CM 409-10010 and IS 408-9743
Technical requirements:
· Air pressure -- 80 - 100 psi · Air supply hose -- 3/16 dia. with 1/8 NPT fitting
13
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
(Continued from previous page)
Base Terminator: 1320840-1 (115 Vac, 60 Mhz) ModPlug Dual Terminator Fast Facts
CAT 5E, 5 and 3 (4-, 6-, 8- and 10-Position) Teminating Modules* Ordering Information
Modular Plug Style 4-Position Plug
6-Position Plug (Standard Body) 6-Position Plug (Long Body) 10-Position Plug
8-Position Plug
8-Position Plug
Catalog Number (MP-44U)
(MP-66__-__)
(MP-66__-L__)
(MP1010U) (MP-88__) (MP-5E__)
* Base Terminator 1320840-1 required. See Instruction Sheet 408-9743 for more information.
Performance Rating CAT 3 CAT 3
CAT 3
CAT 3, CAT 5 CAT 5 CAT 5E
Terminating Module 856196-3 856196-1
856196-4
856196-6 856196-2 1-856196-1
CAT 6A, CAT 6 and CAT 5EMT Terminating Modules*
Ordering Information
Cable Diameter (Strain Relief) Range 0.185" to 0.216" (4.7 mm to 5.5 mm) 0.201" to 0.236' (5.1 mm to 6.0 mm) 0.224" to 0.276" (5.7 mm to 7.0 mm)
Catalog Number Size "A" Size "B" Size "C"
* Base Terminator 1320840-1 required. See Instruction Sheet 408-9743 for more information.
Terminating Module 791804-4 791804-1* 791804-3
14
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Base Terminator: 354711-1 ModPlug Single Terminator Fast Facts
Features
· Terminate up to 250 connectors/hr · Interchangeable steel die sets terminate all CommScope plugs · Compact, low cost pneumatically designed bench unit · Independent adjustments for insertion, primary strain relief, and secondary
strain relief depths · Weighs only 13 lbs · Compact size -- 3½" x 8¾" x 5" tall · CE approved · CommScope plugs are UL approved when terminated using this tool and the procedures
outlined in IS 408-9919 · Technical requirements:
-- Air pressure -- 80 - 100 psi -- Air supply hose -- 1/8 I.D. with 1/8 NPT fitting
Ordering Information
Modular Plug Style
4-Position Plug (Standard Body) 6-Position Plug (Standard Body) 6-Position Plug (Long Body) 10-Position Plug
8-Position Plug
8-Position Plug
Catalog Number (MP-44U)
(MP-66__-__)
(MP-66__-L__) (MP1010U) (MP-88__) (MP-5E__)
Performance Rating CAT 3
CAT 3
CAT 3 CAT 3, CAT 5
CAT 5 CAT 5E
Terminating Module (Only)* 354714-3
354714-1
354714-4 354714-5 354714-2 354714-7
* Base Terminator (354711-1) required if purchasing terminating modules only. ** With tooling included. See Instruction Sheet 408-9919 for additional information.
Terminator with Terminating Module** 354711-4
354711-2
354711-5 354711-6 354711-3 354711-8
15
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Category 6A, 6 and CAT 5EMT Modular Plugs
Features
· Ratchet control provides complete termination cycle · Die set and tool crimps both the strain relief and the modular contacts at the same time · Interchangeable die sets accommodate all plug sizes · Sold with or without die. Dies can be purchased separately
Ordering Information
Cable (Strain Relief) Diameter
Die Set Only Tool With Die* Hand Held Tool Only * Includes 2119000-1 JacKnack Tool.
JacKnack Tool
0.185" to 0.216" 4.7mm to 5.5 mm
Size "A" 790163-8
790163-7
0.201" to 0.236" 5.1 mm to 6.0 mm
Size "B" 790163-2
790163-1
354940-1
Features
· Cable jacket stripper · Cable filler sheer · Untwist wire pairs controls degree of untwist and quick · JacKnack clamp holds untwisted pair until ready for insertion. · Wire placement tool · Lightweight design · Ergonomic design finger loop used to actuate tool · Convenient - finger loop allows the user keep the tool on their finger
Ordering Information
Description JacKnack Tool
Part Number 2119000-1
Instruction Sheet 408-10326
0.224" to 0.276" 5.7mm to 7.0 mm
Size "C" 790163-6
790163-5
16
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Pro-Installer's Modular Plug Hand Tool
Features
· Ratchet control provides complete termination cycle · Sold with and without die sets · Interchangeable die sets accommodate all plug sizes Die set to modular plug cross-reference shown
Ordering Information
Plug Style
DOT Color Die Only P/N Hand Tool with Die
CAT 5E 8-Position (MP-5E_) White
1-853400-0
3-231652-0*
Hand Tool Without Die: 2-231652-0
Cat 5 8-Position (MP-88_)
6-Position Long Body (MP-66_-L_)
Black
Violet
853400-1
853400-7
2-231652-1*
2-231652-7
See Instruction Sheet 408-9767 for more information.
6-Position Standard Body (MP-66_-_) Blue 853400-8
2-231652-8
4-Position (MP-44U)
Green 853400-3
2-231652-3
17
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
Pro-Installer's Modular Plug Hand Tool Kits and Accessories
Features
· Each kit contains carrying case, blade replacement kit, screw driver, and items as listed · Modular plug to die set cross reference listed as shown
Ordering Information
JacKnack Tool
Plug Catalog # Dot Color
Hand Tool
Included Components
CAT 5E 8-Position Die
Set
8-Position Die Set
MP-5E__
MP-88__
White
Black
Description
Pro-Installer's Mod Plug Hand Tool Kits
2119000-1 X X X
2-231652-0 X X X
1-853400-0 X -
853400-1 X X X
Carrying Case, Blade Replacement Kit, JacKnack and Screw Driver ONLY Replacement Blade Kit (5 Cutters and 5 sets of Strip Blades)
Cutter Blade
See Instruction Sheet 408-9767 for more information.
6-Position Standard
MP-66__-__ Blue
853400-8 X X X
4-Position Die Set
MP-44U Green 853400-3
X X -
Part Number 1-231666-5 1-231666-1 1-231666-0 231666-9 231662-5 856727-1
18
For more information, visit commscope.com
Modular Plugs, Accessories and Tooling
Introducing the New Universal Contact
19
For more information, visit commscope.com
www.commscope.com
Visit our website or contact your local CommScope representative for more information.
© 2016 CommScope, Inc. All rights reserved. PRO-CRIMPER and all trademarks identified by ® or TM are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. CA-318178.7-AE (02/16)
Adobe PDF Library 15.0