Fujikura 70S Fusion Splicer Manual Pdf - Fujikura 70s Manual - f00.psgsm.net
70S In case with lid detached Fujikura 70S Fusion Splicer The Fujikura 70S is the world's fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable "auto open sheath clamps" open one sheath clamp, after the tensile test, to prepare the fiber for removal. A new automated "clamshell design" tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features ·· Automated and programmable wind protector ·· 14-second automated tube heater ·· Fully ruggedized for shock, dust and moisture ·· Li-Ion battery with 200 splices/shrinks per charge ·· 5 mm cleave length for splice on connector or small package needs ·· Sheath clamp or fiber holder operation ·· On-board training and support videos ·· Internet software upgrades ·· Multi-function transit case with integrated workstation Ordering Information DESCRIPTION AFL NO. 70S Fusion Splicer (machine only) S015580 Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70A Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 70S Fusion Splicer Kit (with cleaver) Includes: CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70A Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, and CC30 Transit Case with Carrying Strap S015590 70S Fusion Splicer Kit (with cleaver, battery and cord) S015591 Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70A Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty S012996 Two Year Extended Warranty S013000 © 2013, AFL, all rights reserved. PP-4-00059, Revision 0, 3.27.13 Specifications are subject to change without notice. 1 Fujikura 70S Fusion Splicer Recommended Accessories for the 70S DESCRIPTION Cleavers CT-10A Cleaver CT-30A Cleaver Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair) FH-60-160 Fiber Holder (pair) FH-60-LT900 Fiber Holder (each) FH-FC-2000(2 mm cable) (each) FH-FC-3000 (3 mm cable) (each) FH-FC-900 (900 µm cable) (each) Sheath Clamps CLAMP-S70A Sheath Clamp (Coating diameter from 100 µm -1000 µm (5-16 mm cleave)) CLAMP-S70B Sheath Clamp (900 µm diameter loose tube fiber (5-16 mm cleave)) AFL NO. S014784 S014080 S014548 S014549 S014690 S015181 S014696 S014695 S014697 S015583 S015584 DESCRIPTION Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery (160 splice/heat cycles) DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) CC-30 Transit Case USB Cable AFL NO. S015585 S014536 S015581 S015582 S013552 S013556 S013532 S014773 S010532 S015587 S014777 Specifications PARAMETER VALUE Model 70S Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Cladding Diameter 80 m to 150 m Coating Diameter 100 m to 1,000 m Fiber Cleave Length 5 to 16 mm Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards Splicing Time SM FAST mode -- 7 seconds; SM AUTO mode -- 12 seconds; AUTO mode -- 15 seconds Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera core alignment data Storage of Splice Result Last 2,000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation Magnification 300X for single X or Y view, or 160X for X and Y view Viewing Method Dual cameras with 4.73 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively Mechanical Proof Test 1.96 to 2.25N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves Protection Sleeve Length 60 mm, 40 mm, micro Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater Wind Protection Maximum wind velocity of 15 m/s. (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) Weight 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery © 2013, AFL, all rights reserved. PP-4-00059, Revision 0, 3.27.13 Specifications are subject to change without notice. 2Adobe InDesign CS5 (7.0.4) Adobe PDF Library 9.9