iDatalink - Install Guides
INSTALL GUIDE TMP-AL(RS)-CH5-[ADS-ALCA]-EN
DOCUMENT NUMBER 83529
REVISION DATE 20231124
FIRMWARE TMP-AL(RS)-CH5-[ADS-ALCA]
HARDWARE ADS-ALCA
ACCESSORIES ADS-USB (REQUIRED) ADS-HRN-CH5 (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL)
TERMS OF USE: Automotive Data Solutions Inc. ("ADS") products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician's responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
BEFORE INSTALLATION
1- Connect module to computer 2- Login to Weblink account 3- Flash firmware to module (module is not preloaded with firmware) 4- Use accessories accordingly (accessories are sold separately)
www.idatalink.com
WARNING
I Install type 1 & 3 require a T-Harness (sold separately). Install type 2 doesn't require a T-Harness.
VEHICLE LIST - 1 OF 1
MAKE MODEL
RAM
JEEP
DODGE
CHRYSLER
200 300 / 300C Aspen PT Cruiser Sebring Avenger Caliber (with start wire) Caliber Charger Durango Magnum Nitro Ram 1500 Ram 2500 Ram 3500 Ram 3500 chassis cab Ram 4500 chassis cab Ram 5500 chassis cab Commander Compass Grand Cherokee Liberty Patriot Wrangler JK STD Key AT 4500 chassis cab 5500 chassis cab
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
PAGE 2 OF 19 DOC.: #83529· 20231124
FEATURES
YEAR INSTALL TYPE DATA IMMOBILIZER BYPASS 3X LOCK START/STANDALONE MOD. PRIORITY UNLOCK DOOR LOCK DOOR UNLOCK ARM OEM ALARM DISARM OEM ALARM TRUNK/HATCH RELEASE DATA/MUX STARTER CTRL RAP SHUTDOWN CTRL
11-14 2 or 3 · · · · · · · · · ·
05-07 1
··········
07-10 2 or 3 · · · · · · · · · ·
06-10 1
··········
07-10 2 or 3 · · · · · · · · · ·
08-14 2 or 3 · · · · · · · · · ·
07 1
··········
07-12 2 or 3 · · · · · · · · · ·
06-07 1
··········
07-10 2 or 3 · · · · · · · · · ·
05-07 1
··········
07-11 2 or 3 · · · · · · · · ·
07-08 2 or 3 · · · · · · ·
··
07-09 2 or 3 · · · · · · ·
··
07-09 2 or 3 · · · · · · ·
··
07-09 2 or 3 · · · · · · ·
··
08-10 2 or 3 · · · · · · ·
··
08-10 2 or 3 · · · · · · ·
··
06-07 1
··········
07-17 2 or 3 · · · · · · · · · ·
05-07 1
··········
08-12 2 or 3 · · · · · · · · ·
07-17 2 or 3 · · · · · · · · · ·
07-18 2 or 3 · · · · · · · · ·
10 2 or 3 · · · · · · ·
··
10 2 or 3 · · · · · · ·
··
www.idatalink.com
BOX CONTENTS MODULE
1 2 3 WHITE 4 5 6
1
2
A
3 WHITE 4
5
6
7
B
1
WHITE 2 3
C
1
D
BLUE 2
3
BOX CONTENTS - 1 OF 1
6 PIN WHITE CONNECTOR
PROGRAMMING BUTTON
LED 1
7 PIN WHITE CONNECTOR
10
9
8
7
F
6 BLACK 5
4
3
2
1
3 PIN WHITE CONNECTOR
E
4 BLACK
3 DATA PORT
2 (WEBLINK, RF, TELEMATIC)
1
3 PIN BLUE CONNECTOR
PAGE 3 OF 19 DOC.: #83529· 20231124
4 PIN BLACK CONNECTOR 10 PIN BLACK CONNECTOR
DATA CABLE 1 DATA CABLE 2
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
MODULE DATA PORT
4 PIN BLACK CABLE
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
CH5 T-HARNESS (optional accessory sold separately) CH5 T-HARNESS
COMPUTER USB PORT
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
TELEMATIC KIT (accessories sold separately) MYSTART
MODULE DATA PORT
BLUE WHITE BLACK RED
COMPATIBLE ACCESSORIES - 1 OF 1
NC NC
ANTENNA
PAGE 4 OF 19 DOC.: #83529· 20231124
5 AMPS
VEHICLE
RED - 12V (+) BLACK - GROUND YELLOW - IGNITION (+) INPUT GREEN - HORN (-) OUTPUT
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
CHRYSLER MAKE MODEL
TYPE 1 - WIRE CHART - 1 OF 1
YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION
300 PT Cruiser Caliber with start wire Charger Magnum Commander Grand Cherokee
05-07 06-10 07 06-07 05-07 06-07 05-07
Mux Starter Mux Starter Mux Starter Mux Starter Mux Starter Mux Starter Mux Starter
C1
Black 5 pin
2 Purple/Brown
(MUX) Ignition switch
C1
Black 5 pin
4 Pink/DkGreen
(+)
Ignition switch
C1
Black 5 pin
2 Purple/Brown
(MUX) Ignition switch
C1
Black 5 pin
4 Pink/LtBlue
(+)
Ignition switch
C1
Black 5 pin
2 Purple/Brown
(MUX) Ignition switch
C1
Black 5 pin
4 Pink/DkGreen
(+)
Ignition switch
C1
Black 5 pin
2 Purple/Brown
(MUX) Ignition switch
C1
Black 5 pin
4 Pink/DkGreen
(+)
Ignition switch
C1
Black 5 pin
2 Purple/Brown
(MUX) Ignition switch
C1
Black 5 pin
4 Pink/DkGreen
(+)
Ignition switch
C1
Black 5 pin
2 Purple/Brown
(MUX) Ignition switch
C1
Black 5 pin
4 Pink/Orange
(+)
Ignition switch
C1
Black 5 pin
2 Purple/Brown
(MUX) Ignition switch
C1
Black 5 pin
4 Pink/Orange
(+)
Ignition switch
PAGE 5 OF 19 DOC.: #83529· 20231124
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
COMPONENT LOCATOR
DODGE
JEEP
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
M1
M2
M6
M3
M4
M5 DATA
M1 01 02 03 04 05 06
M2 01 02 03 04 05 06 07
M3 01 02 03
M4 01 02 03
M5 01 02 03 04
M5 01 GREEN/BLACK- HOOD STATUS (-) INPUT 02 BLUE/BLACK (NC) 03 RED/WHITE (NC) 04 BROWN (NC) 05 PURPLE/YELLOW (NC) 06 PURPLE/BLACK (NC) 07 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN (NC) 10 PURPLE/WHITE (NC)
TYPE 1 - WIRING DIAGRAM - 1 OF 1
GREEN/RED - CONTROL (MUX) OUTPUT PURPLE - STARTER (+) OUTPUT
CUT AND INSULATE THE PURPLE WIRE (NEXT TO WHITE WIRE)
1: SKIM CONNECTOR 1: SKIM HARNESS
CONTROL (MUX) - 02 STARTER (+) - 04
2 54321
PAGE 6 OF 19 DOC.: #83529· 20231124
IGNITION SWITCH 1
2
COMPATIBLE ACCESSORY
IMPORTANT: SEE THE COMPATIBLE ACCESSORIES PAGE FOR DETAILS.
HOOD SWITCH 1
INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 1
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
TYPE 2 - WIRE CHART - 1 OF 2
PAGE 7 OF 19 DOC.: #83529· 20231124
COMPONENT LOCATOR
YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION
MAKE MODEL
CHRYSLER
200 Aspen Sebring Avenger Caliber Durango Nitro
11-14 07-10 07-10 08-14 07-12 07-10 07-11
CanH CanL Mux Ignition 12V CanH CanL Mux Ignition 12V CanH CanL Mux Ignition 12V CanH CanL Mux Ignition 12V CanH CanL Mux Ignition 12V CanH CanL Mux Ignition 12V CanH CanL Mux Ignition 12V
DODGE
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
~
~
8 pin
6 White/Orange
~
~
8 pin
7 White
~
~
8 pin
1 Purple/Brown
~
~
8 pin
3 Pink
~
~
8 pin
5 Red
~
~
8 pin
6 White/Orange
~
~
8 pin
7 White
~
~
8 pin
1 Purple/Brown
~
~
8 pin
3 Pink/Gray
~
~
8 pin
5 Red
~
~
8 pin
6 White/Orange
~
~
8 pin
7 White
~
~
8 pin
1 Purple/Brown
~
~
8 pin
3 Pink
~
~
8 pin
5 Red
~
~
8 pin
6 White/Orange
~
~
8 pin
7 White
~
~
8 pin
1 Purple/Brown
~
~
8 pin
3 Pink
~
~
8 pin
5 Red
~
~
8 pin
6 White/Orange
~
~
8 pin
7 White/Pink
~
~
8 pin
1 Purple/Brown
~
~
8 pin
3 Pink/White
~
~
8 pin
5 Red/LtBlue
~
~
8 pin
6 White/Orange
~
~
8 pin
7 White/LtBlue
~
~
8 pin
1 Purple/Brown
~
~
8 pin
3 Pink/Gray
~
~
8 pin
5 Red
~
~
8 pin
6 White/LtGreen
~
~
8 pin
7 White
~
~
8 pin
1 Purple/Brown
~
~
8 pin
3 Pink/White
~
~
8 pin
5 Red
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
(DATA) (DATA) (MUX) (+) (+) (DATA) (DATA) (MUX) (+) (+) (DATA) (DATA) (MUX) (+) (+) (DATA) (DATA) (MUX) (+) (+) (DATA) (DATA) (MUX) (+) (+) (DATA) (DATA) (MUX) (+) (+) (DATA) (DATA) (MUX) (+) (+)
Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch Ignition switch
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
www.idatalink.com
MAKE MODEL
DODGE
TYPE 2 - WIRE CHART - 2 OF 2
PAGE 8 OF 19 DOC.: #83529· 20231124
COMPONENT LOCATOR
YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION
CanH
~
~
8 pin
6 White/Orange
(DATA) Ignition switch
~
CanL
~
~
8 pin
7 White
(DATA) Ignition switch
~
Ram Pickup
07-10 Mux
~
~
8 pin
1 Purple/Brown
(MUX) Ignition switch
~
Ignition
~
~
8 pin
3 Pink/White
(+)
Ignition switch
~
12V
~
~
8 pin
5 Gray/Red
(+)
Ignition switch
~
CanH
~
~
8 pin
6 White/Orange
(DATA) Ignition switch
~
CanL
~
~
8 pin
7 White/Pink
(DATA) Ignition switch
~
Compass
07-17 Mux
~
~
8 pin
1 Purple/Brown
(MUX) Ignition switch
~
Ignition
~
~
8 pin
3 Pink/White
(+)
Ignition switch
~
12V
~
~
8 pin
5 Red/LtGreen
(+)
Ignition switch
~
CanH
~
~
8 pin
6 White/Black
(DATA) Ignition switch
~
CanL
~
~
8 pin
7 White/Blue
(DATA) Ignition switch
~
Liberty
08-12 Mux
~
~
8 pin
1 Purple/Brown
(MUX) Ignition switch
~
Ignition
~
~
8 pin
3 Pink/White
(+)
Ignition switch
~
12V
~
~
8 pin
5 Red
(+)
Ignition switch
~
CanH
~
~
8 pin
6 White/Orange
(DATA) Ignition switch
~
CanL
~
~
8 pin
7 White/Pink
(DATA) Ignition switch
~
Patriot
07-17 Mux
~
~
8 pin
1 Purple/Brown
(MUX) Ignition switch
~
Ignition
~
~
8 pin
3 Pink/White
(+)
Ignition switch
~
12V
~
~
8 pin
5 Red/LtGreen
(+)
Ignition switch
~
CanH
~
~
8 pin
6 White/Black
(DATA) Ignition switch
~
CanL
~
~
8 pin
7 White/LtBlue
(DATA) Ignition switch
~
Wrangler JK STD Key AT
07-18 Mux
~
~
8 pin
1 Purple/Brown
(MUX) Ignition switch
~
Ignition
~
~
8 pin
3 Pink/White
(+)
Ignition switch
~
12V
~
~
8 pin
5 Red
(+)
Ignition switch
~
CanH
~
~
8 pin
6 White/Orange
(DATA) Ignition switch
~
CanL
~
~
8 pin
7 White
(DATA) Ignition switch
~
Pickup
10 Mux
~
~
8 pin
1 Purple/Brown
(MUX) Ignition switch
~
Ignition
~
~
8 pin
3 Pink/White
(+)
Ignition switch
~
12V
~
~
8 pin
5 Gray/Red
(+)
Ignition switch
~
JEEP
RAM
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
M1
M2
M6
M3
M4
M5 DATA
M1 01 GRAY/YELLOW (NC) 02 GRAY/RED (NC) 03 GREEN/YELLOW (NC) 04 GREEN/RED (NC) 05 BLUE/YELLOW (NC) 06 BLUE/RED (NC)
M2 01 PINK - IGNITION (+) INPUT 02 PINK/BLACK (NC) 03 ORANGE (NC) 04 ORANGE/WHITE (NC) 05 ORANGE/BLACK (NC) 06 BROWN/YELLOW - CANL 07 BROWN/RED - CANH
M3 01 YELLOW - MUX 02 YELLOW/RED (NC) 03 YELLOW/BLACK (NC)
M4 01 WHITE - 12V (+) 02 WHITE/RED (NC) 03 WHITE/BLACK - IGNITION (+) OUTPUT
M5 01 BLUE/WHITE (NC) 02 WHITE (NC) 03 BLACK - GROUND 04 RED - 12V (+)
M5 DATA CABLE
M6 01 GREEN/BLACK- HOOD STATUS (-) INPUT 02 BLUE/BLACK (NC) 03 RED/WHITE (NC) 04 BROWN (NC) 05 PURPLE/YELLOW (NC) 06 PURPLE/BLACK (NC) 07 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN (NC) 10 PURPLE/WHITE (NC)
TYPE 2 - WIRING DIAGRAM - 1 OF 1
MUX - 01 IGNITION (+) - 03
12V (+) - 05 CANH - 06 CANL - 07
1: SKIM CONNECTOR 87654321
PAGE 9 OF 19 DOC.: #83529· 20231124
IGNITION SWITCH
1
WITHOUT A COMPATIBLE ACCESSORY
OR
WITH A COMPATIBLE ACCESSORY. IMPORTANT: SEE THE COMPATIBLE ACCESSORIES PAGE FOR DETAILS.
7.5A
12V (+)
HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 1
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
M1
M2
M6
M3
M4
M5 DATA
M1 01 02 03 04 05 06
M2 01 02 03 04 05 06 07
M3 01 02 03
M4 01 02 03
M5 01 02 03 04
M5 01 GREEN/BLACK- HOOD STATUS (-) INPUT 02 BLUE/BLACK (NC) 03 RED/WHITE (NC) 04 BROWN (NC) 05 PURPLE/YELLOW (NC) 06 PURPLE/BLACK (NC) 07 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN (NC) 10 PURPLE/WHITE (NC)
TYPE 3 - WIRING DIAGRAM - 1 OF 1
1: SKIM CONNECTOR 1: SKIM HARNESS
PAGE 10 OF 19 DOC.: #83529· 20231124
IGNITION SWITCH
1
COMPATIBLE ACCESSORY
IMPORTANT: SEE THE COMPATIBLE ACCESSORIES PAGE FOR DETAILS.
HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 1
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
01
Close driver door.
MODULE PROGRAMMING PROCEDURE - STD KEY - 1 OF 1
07
Turn key to OFF position.
ACC ON
OFF
START
02
Re-open driver door to wake up data bus.
08
Remove key.
ACC ON
OFF
START
03
Insert key into ignition.
ACC ON
OFF
START
09
Press UNLOCK on the OEM remote. If vehicle
is not equipped with OEM remote, press
module programming button.
04
Turn key to ON position.
ACC ON
OFF
START
10
Wait, LED will turn solid GREEN for 2 seconds.
05
LED will turn solid RED.
11
Module Programming Procedure completed.
06
Within 5 seconds, LED will flash GREEN
rapidly.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
PAGE 11 OF 19 DOC.: #83529· 20231124
www.idatalink.com
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
>>
NOTE: In Valet Mode, the Remote starter is not
>>
To exit valet mode: repeat steps 1 to 5.
functional. Keyless entry, Lock and Unlock will
remain functional. See RF kit user manual for
alternate valet mode programming.
01
Time restriction. Complete next step within 7
seconds.
02
Cycle ignition ON five times [5x OFF/ON]
OFF ACC ON START rapidly.
ENGINE START STOP
03
Wait, LED 1 will turn solid RED for 2 seconds.
04
Set ignition to OFF position.
OFF ACC ON START
ENGINE START STOP
05
Valet Mode Programming Procedure
completed.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
PAGE 12 OF 19 DOC.: #83529· 20231124
www.idatalink.com
MODULE NAVIGATION PROCEDURE - 1 OF 1
PAGE 13 OF 19 DOC.: #83529· 20231124
>>
It is mandatory to exit the Module Navigation
04
TO ACCESS THE OPTIONS: Press and hold
10
To save and return to the OPTIONS: Press and
at the end of this procedure. Failure to exit the
programming button until LED 1 turns solid
hold programming button until LED 1 turns
Module Navigation will drain vehicle battery.
RED.
solid RED.
To exit the Module Navigation at any time:
Follow STEP 13.
>>
Module must be programmed to the vehicle.
05
IN THE OPTIONS: Press the programming
11
LED 1 will flash RED as many times as the
[Y]
button as many times as the option number
[Y]
current option number continuously.
indicates. LED 1 will flash RED an equal
amount of times continuously.
>>
Use the Module Navigation Chart on the next
06
TO ACCESS THE SETTINGS: Press and hold
12
Configure every other setting and proceed to
page.
programming button until LED 1 turns solid
step 13.
GREEN.
01
Set ignition to OFF position.
OFF ACC ON START
ENGINE START STOP
07
LED 1 will flash GREEN as many times as
13
[Z]
the current (or default) setting number,
continuously.
02
TO ACCESS THE MENUS: Press and hold
08
IN THE SETTINGS: Press the programming
14
programming button until LED 1 turns solid
[Z]
button as many times as necessary to access
GREEN.
your setting. LED 1 will flash GREEN an equal
amount of times continuously.
03
IN THE MENUS: Press the programming
09
[X]
button as many times as the menu number
indicates. LED 1 will flash GREEN an equal
amount of times continuously.
To return to the MENUS: exit the Module
>>
Navigation and redo the Module Navigation
Procedure.
MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will flash RED rapidly. Release programming button. LED 1 will turn OFF.
Module navigation completed.
Failure to exit the Module Navigation will drain vehicle battery.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
MODULE NAVIGATION CHART - 1 OF 1
PAGE 14 OF 19 DOC.: #83529· 20231124
[X] MENUS [Y] OPTIONS [Z] SETTINGS
MODULE NAVIGATION CHART: NOTES
I Default settings are listed in bold. II Make sure the option is covered on the vehicle before
attempting to change the setting.
*Vehicle will shutdown when a door is opened.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
01 CONFIGURATION 02-07 Technical Support only
01 01 DISARM/UNLOCK BEFORE START
02
01 02 RELOCK AFTER START
02
01 03 RELOCK AFTER SHUTDOWN
02
01 04 FORCE UNLOCK ALL ON FIRST PRESS
02
01 05 TAKEOVER
02
01
02 06 SECURE TAKEOVER DELAY
03
04
01
02 07 FACTORY KEYLESS RS SEQUENCE
03
04
01
02
03
04 08 MODULE RUN TIME
05
06
07
08
01
02
03
04 09 WAIT TO START DELAY
05
06
07
08
10-12 N/A
01
01 N/A
01
OFF ON OFF ON OFF ON OFF ON ENABLE DISABLE* 45 SEC 90 SEC 03 MIN 04 MIN DISABLE N/A LOCK + UNLOCK + LOCK LOCK + LOCK + LOCK 03 MIN 05 MIN 10 MIN 15 MIN 25 MIN 30 MIN 35 MIN 15 MIN 02 SEC 05 SEC 08 SEC 10 SEC 15 SEC 20 SEC 25 SEC 30 SEC N/A N/A
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
REMOTE STARTER ERROR CODES - 1 OF 1
PAGE 15 OF 19 DOC.: #83529· 20231124
REMOTE STARTER ERROR CODES: NOTES I WARNING: The following applies only when the parking lights are connected and supported by the system.
II After a remote starter failure, the parking lights will flash three [3x] times followed by the error code. See table.
PARKING LIGHT FLASHES DIAGNOSTIC
3 + 1 3 + 2 3 + 3 3 + 4 3 + 5 3 + 6 3 + 7 3 + 8 3 + 9 3 + 10 3 + 11 3 + 12 3 + 13 3 + 14 3 + 15
Tach is not programmed OR engine is already running. Key is in ignition ON position. Door is open. Trunk is open. Foot brake is ON. Hood is open. N/A Vehicle failed to remote start. Vehicle movement detected (VSS). System is in Valet Mode. CAN communication failure RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. Bypass problem. Idle mode or takeover is not available on this vehicle. Overheat protection.
REMOTE STARTER SHUTDOWN ERROR CODES: NOTES
I WARNING: The following applies only when the parking lights are connected and supported by the system.
II If the engine shuts down after a remote starter sequence use the query command from a compatible aftermarket remote to display the shutdown error code. The parking lights will flash four [4x] times followed by the error code. See table.
PARKING LIGHT FLASHES DIAGNOSTIC
4 + 1 4 + 2 4 + 3 4 + 4 4 + 5 4 + 6 4 + 7 4 + 8 4 + 9 4 + 10 4 + 11 4 + 12 4 + 13 4 + 14 4 + 15
Engine tach signal was lost. Emergency brake signal was lost. Foot brake ON detected. Hood open detected. Tach over rev detected. Glow plug timeout error. Vehicle movement detected (VSS). Check engine light ON. Low fuel level. Open door detected. CAN communication failure during RS sequence. RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. Bypass problem. Idle mode or takeover is not available on this vehicle. Overheat protection.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
TEST MODULE I DURING PROGRAMMING II DURING REMOTE START III WITH IGNITION OFF
MODULE DIAGNOSTICS - 1 OF 1
LED 1 STATUS DIAGNOSTIC
Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF Flashing RED Solid RED Flashing GREEN Solid GREEN then OFF OFF
Missing/wrong information from firmware or vehicle. Module waiting for more vehicle information. Additional steps required to complete module programming. Module correctly programmed. No activity or module already programmed. Module incorrectly programmed. Module incorrectly programmed. Module correctly programmed and operational. Reset in progress. Invalid ground when running status from remote starter. Module incorrectly programmed or connected. Module not programmed. Waiting for more vehicle information. False ground when running status from remote starter. Reset in progress. Module at rest and ready for a remote start sequence.
PAGE 16 OF 19 DOC.: #83529· 20231124
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
MODULE RESET PROCEDURE - 1 OF 1
01
Disconnect all connectors from module except
07
Reconnect all connectors.
the BLACK 4-PIN connector.
02
Disconnect the BLACK 4-PIN connector.
08
Repeat programming procedure.
03
PRESS AND HOLD programming button while
>>
Failure to follow procedure may result with a
connecting the BLACK 4-PIN connector.
DTC or a CHECK ENGINE error message.
04
Wait, LED 1 will flash RED. RELEASE
programming button.
05
LED 1 will turn RED for 2 seconds.
06
Module RESET completed.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
PAGE 17 OF 19 DOC.: #83529· 20231124
www.idatalink.com
TAKEOVER PROCEDURE - STD KEY - 1 OF 1
>>
All vehicle doors must be closed and locked
>>
Failure to follow procedure will result in
prior to remote start sequence.
vehicle engine shutdown.
01
Press unlock on OEM or aftermarket remote.
02
Insert key into ignition.
ACC ON
OFF
START
03
Turn key to ON position.
ACC ON
OFF
START
04
Press and release BRAKE pedal.
05
Take over procedure completed.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
PAGE 18 OF 19 DOC.: #83529· 20231124
www.idatalink.com
INSTALLATION CHECKLIST - 1 OF 1
PAGE 19 OF 19 DOC.: #83529· 20231124
CHECKLIST
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
2 Close all vehicle doors, hood and trunk.
Question 7: Does the vehicle shut down?
3 Press the LOCK button once [1x] on the aftermarket keyfob.
YES: Go to next step.
Question 1: Do the doors lock? YES: Go to next step.
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.
10 RAP and auto light shutdown test
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
4 Press the UNLOCK button once [1x] on the aftermarket keyfob. Question 2: Do the doors unlock?
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.
YES: Go to next step.
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12
If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported. Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 6: Does the vehicle remote start?
YES: Go to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. NO: Go to next step. 14 Close hood. 15 Enter vehicle and close the doors. 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 17 Wait for the vehicle to start. 18 Press brake pedal.
Question 10: Does the vehicle shut down? YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the
wiring diagram, if applicable, and call technical support.
19 Exit vehicle. 20 Installation checklist completed.
NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023
TMP-AL(RS)-CH5-[ADS-ALCA]-EN
www.idatalink.com
Adobe PDF Library 17.0