User Manual for BROWAN models including: WLRGFM-100, MerryIoT Hub IoT Gateway
2022-05-03 — User Manual. Number BQW 02 0036.001 ... While the information in this manual has been compiled with great care, it may not ... Product Design .
*106 86(5 *8,'( 5(9,6,21 ,6725< &23
*106 86(5 *8,'( 5(9,6,21 ,6725< &23<5,* 7
File Info : application/pdf, 15 Pages, 1.12MB
DocumentDocumentBrowan Communications Inc. No.15-1, Zhonghua Rd., Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, R.O.C. 30352 Tel: +886-3-6006899 Fax: +886-3-5972970 Document Number BQW_02_0036.001 MerryIoT Hub User Manual Revision History Revision Date .001 May 3rd, 2022 Description First release Author Demy GNMS USER GUIDE Copyright © 2021 BROWAN COMMUNICATIONS INC. This document is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of BROWAN COMMUNICATIONS INC. Notice BROWAN COMMUNICATIONS INC. reserves the right to change specifications without prior notice. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. BROWAN COMMUNICATIONS INC. shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents are subject to written authorization from BROWAN COMMUNICATIONS INC. Trademarks The product described in this document is a licensed product of BROWAN COMMUNICATIONS INC. GNMS USER GUIDE Contents REVISION HISTORY .............................................................................................................................. 1 COPYRIGHT ........................................................................................................................................... 2 NOTICE................................................................................................................................................... 2 TRADEMARKS....................................................................................................................................... 2 CONTENTS............................................................................................................................................. 3 CHAPTER 1 INTRODUCTION ............................................................................................................ 4 Purpose and Scope ............................................................................................................................. 4 Product Design .................................................................................................................................... 4 Definitions, Acronyms, and Abbreviations........................................................................................... 4 Reference ............................................................................................................................................ 4 CHAPTER 2 HARDWARE DETAILS .................................................................................................. 5 LED Indicators ..................................................................................................................................... 5 I/O Ports .............................................................................................................................................. 6 Back Label........................................................................................................................................... 7 Package Label..................................................................................................................................... 7 Package Content ................................................................................................................................. 7 CHAPTER 3 USER MANUAL ............................................................................................................. 8 3.1 Connect MerryIoT Hub .................................................................................................................. 8 3.2 MerryIoT Hub Setting .................................................................................................................... 8 3.3 SET WAN...................................................................................................................................9 CHAPTER 4 REGULATORY ............................................................................................................ 13 Federal Communication Commission Interference Statement ......................................................... 13 Industry Canada statement: .............................................................................................................. 14 GNMS USER GUIDE Chapter 1 Introduction Purpose and Scope The purpose of this document is to describe the main functions, user manual, supported features, and system architecture of the WLRRTES-106 MerryIoT Hub based on the latest LoRaWAN specification. Product Design The dimension of WLRRTES-106 MerryIoT Hub is with the dimension of 116 x 91 x 27 mm, and with one LAN port, one Micro-USB port for 5V DC/2A power input, four LED indicators, and one reset button. Definitions, Acronyms, and Abbreviations Item Description LPWAN LoRaWANTM ABP OTAA TBD Low-Power Wide-Area Network LoRaWANTM is a Low Power Wide Area Network (LPWAN) specification intended for wireless battery operated Things in a regional, national or global network. Activation by Personalization Over-The-Air Activation To Be Defined Reference Document LoRaWAN Specification v1.0.3 RP002-1.0.1 LoRaWAN Regional Parameters Author LoRa Alliance LoRa Alliance Chapter 2 Hardware Details LED Indicators LED sequence: Power(System), WAN, WiFi, LoRa One Orange, Three Green Solid LED is for static status, blanking means the system is upgrading or active devices linked to the corresponding port Solid On Blinking Off Power System(Orange) Power ON Booting (ignore bootloader) Power Off WAN(Blue) Ethernet Plug and got IP Addr Connecting Unplug Wireless(Blue) WiFi Station Mode and got IP Addr Connecting Wireless Disable LoRa(Blue) LoRa is work Connecting Table 1 LED Behaviors LoRa is not work Figure 1 LED indicators I/O Ports Port RJ45 Reset Micro USB Coun t 1 1 1 Description WAN port of the device Reset to default (5 seconds to reset settings to factory default) Power input via USB adaptor(5VDC/2A) Figure 2 IO Ports Back Label The marking information is located at the bottom of the apparatus. Figure 3 Back Label Package Label N Item o. Description 1 Product BOX Brown Box 2 Labeling Model/ MAC/ Serial Number/ Type Approval Package Content N Description o. 1 MerryIoT Hub 2 Power adapter (100-240VAC 50/60Hz to 5VDC/2A) 3 Ethernet Cable 1 meter (UTP) Quantity 1 1 1 Chapter 3 User Manual 3.1 Connect MerryIoT Hub You can connect to the gateway via WiFi interface which the SSID and password are printed on the back label by default. Figure 4 Back Label The rule of gateway SSID is MerryIoT_Femto_Lite-xxxxxx where the last digits are the last 6 digits of the MAC address The PC will fetch the IP address of range 192.168.4.x except 192.168.4.1 assigned by the AP. 3.2 MerryIoT Hub Setting Open the web browser(ex: Chrome) after connecting to the gateway via IP address "192.168.4.1" Figure 5 WEB UI-1 Figure 6 WEB UI-2 Now you can configure the gateway through the WEB UI. 3.3 SET WAN The gateway support either "Ethernet" or "Wi-Fi" connection as the internet backhaul. Figure 7 WAN connection STEP 3.3.1 Ethernet Setting Configure the IP address of WAN.[Static IP/DHCP client] Figure 8 WAN connection ETHERNET STATUS The information of IP address/Subnet Mask/Gateway/DNS. ETHERNET SETTING - Configure the IP address of WAN.[Static IP/DHCP client] Static IP Setup the IP address/Subnet Mask/Default Gateway/DNS of the static IP. Contact the network administrator for the static IP address information. DHCP The IP address/Subnet Mask/Default Gateway/DNS will be assigned by the DHCP server. Figure 9 DHCP client STEP 3.3.2 Wi-Fi Select "Wi-Fi" to be the internet backhaul connection. The gateway WiFi interface is the Access Point by default which SSID is "MerryIoT_Femto_Lite-XXXXXX" printed on the back label. The administrator can only access the WEB UI through the Access Point mode to configure the gateway. The gateway will be the WiFi client and will not be able to access the WEB UI after enabling the WiFi interface as the internet backhaul connection. Figure 10 Wi-Fi connection MANUAL CONNECT Specify the remote AP SSID and enter the password if necessary. Click "Join" to accept or "Cancel" to abort. Figure 11 Wi-Fi manual connection The gateway will scan the nearby access point automatically. Just click the SSID for the WiFi connection. Figure 12 Wi-Fi manual connection Enter a WiFi password if it is necessary for the connection. Figure 13 Wi-Fi password Click "Join" to accept or "Cancel" to abort. Chapter 4 Regulatory Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Operation of this device is restricted to indoor use only Industry Canada statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference (2) This device must accept any interference, including interference that may cause undesired operation of the device L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.Microsoft: Print To PDF
