House of Marley Rise Up Solar Bluetooth Speaker

Components

• A. LED Grill Trim: Decorative LED lighting on the speaker grill.
• B. LED Control: Button to control LED lighting effects.
• C. Power On/Off: Press and hold to turn the speaker on or off.
• D. Volume Up / Skip Forward: Press to increase volume. Press and hold to skip to the next track.
• E. Volume Down / Skip Backward: Press to decrease volume. Press and hold to skip to the previous track.
• F. Bottle Opener: Integrated bottle opener.
• G. Aux In: 3.5mm auxiliary input port for wired connections.
• H. USB-C Charging Port: Port for charging the speaker.

Controls & Operations

Power On/Off: Press and hold the Power button (C) for 3 seconds.

LED Brightness: Press the LED Control button (B) once while the speaker is on.

Language Select: Press the LED Control button (B) twice while the speaker is on.

Pairing Mode: The speaker automatically enters pairing mode when powered on for the first time or when Bluetooth is disconnected. The LED will flash.

Force Pairing Mode / Factory Reset: Press and hold the Power button (C) for 8 seconds.

LED Indicator Status

Bluetooth Pairing

1. Turn on the Rise Up Solar speaker. It will automatically enter pairing mode.
2. On your device (phone, tablet, etc.), go to Bluetooth settings.
3. Select "Rise Up Solar" from the list of available devices.
4. Once paired, the LED indicator will turn solid white.

Stereo Pair Mode

To create a stereo sound experience with two Rise Up Solar speakers:

1. Turn on both Rise Up Solar speakers.
2. On the first speaker, press and hold the SELECT button for 3 seconds until you hear "LEFT CHANNEL".
3. On the second speaker, press and hold the SELECT button for 3 seconds until you hear "RIGHT CHANNEL".
4. The speakers will pair with each other. The LED will indicate the status.

Multi-Pair Mode

Connect multiple Rise Up Solar speakers for a wider sound experience (requires 3 or more speakers):

1. Turn on all Rise Up Solar speakers you wish to connect.
2. On the first speaker, press and hold the SELECT button for 3 seconds. It will announce "Rise Up Solar".
3. On the second speaker, press and hold the SELECT button for 3 seconds. It will announce "Rise Up Solar".
4. On the third speaker, press and hold the SELECT button for 3 seconds. It will announce "Rise Up Solar".
5. Repeat for any additional speakers. The speakers will connect in a multi-pair configuration.

Compliance Information

FCC Compliance: This equipment complies with Part 15 of the FCC Rules for a Class B digital device. It is designed to provide reasonable protection against harmful interference. Operation is subject to two conditions: no harmful interference and acceptance of received interference.

FCC RF Exposure: Complies with FCC radiation exposure limits for an uncontrolled environment.

ISEDC Compliance (Canada): Complies with Innovation, Science, and Economic Development Canada license-exempt RSS standards and ICES-003 for Class B digital apparatus.

ISEDC RF Exposure: Complies with RF exposure guidelines.

Battery Safety: Warnings regarding incorrect battery replacement, disposal in fire, mechanical crushing, extreme temperatures, and low air pressure are provided. Batteries must not be disposed of with domestic waste; use designated collection points.

WEEE (Waste Electrical and Electronic Equipment): This symbol indicates the product should not be disposed of with household waste in the EU. Recycle responsibly to promote sustainable reuse of material resources.

EU Declaration of Conformity: FKA Brands Ltd. declares that this radio equipment complies with Directive 2014/53/EU. A copy is available at www.thehouseofmarley.co.uk/declaration-of-conformity.

Australia/New Zealand Warning: Use only Australian-approved detachable power supply units for charging.

Hearing Protection: To prevent possible hearing damage, do not listen at high volume levels for long periods.