Poe Ethernet archivos - Waytec Peru
TP-LINK LiteWave tīkla pārslēgs Nepārvaldīts Fast (LS109P)
TP-Link LS105GP LiteWave 5-Port Gigabit Switch with 4-Port PoE - Good People
LiteWave PoE Switches Series Datasheet Ideal for Basic Networks LS105LP/LS105GP LS106LP/LS108GP LS109P/LS1210GP LiteWave PoE Switches Datasheet Overview The TP-Link LiteWave Series PoE Switches require no configuration and provide PoE (Power over Ethernet) ports. They can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Network Diagram Note: LS105GP is used for demonstration Internet Router Highlights - With multiple PoE ports, transfer data and power on one single cable - Working with IEEE 802.3af /at compliant PDs, expand your network* - 802.1p/DSCP QoS enable smooth latency-sensitive traffic - Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance system 250m PoE Transmission** - Isolation Mode (for LS109P&LS1210GP only) allows one-click client traffic separation for higher security and performance - PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices - Plug and play, no configuration and installation required IP Camera IP Phone Access Point Access Point LiteWave PoE Switches Datasheet Product Pictures Model Standards Interface Network Media (Cable) PoE Standard PoE PoE Port PoE Power Budget Auto Negotiation Auto MDI/MDIX Max Power Consumption Max Heat Dissipation Forwarding Mode Switch Capacity MAC Address Table Extend Mode Isolation Mode PoE Auto Recovery Flow Conrol Fan Quantity LED Dimensions LS105LP LS106LP IEEE802.3i, IEEE802.3u, IEEE802.3x,IEEE802.3af 5 10/100 Mbps RJ45 Ports 6 10/100 Mbps RJ45 Ports LS109P IEEE802.3i, IEEE802.3u, IEEE802.3x,IEEE802.3af, IEEE802.3at 9 10/100 Mbps RJ45 Ports 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 STP (maximum 100 m) LS105GP LS108GP LS1210GP IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p, EEE 802.3z 5 10/100/1000 Mbps RJ45 Ports 8 10/100/1000 Mbps RJ45 Ports 9 10/100/1000 Mbps RJ45 Ports 1 1000 Mbps SFP port 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 STP (maximum 100 m) 1000BASE-T: UTP category 5e cable or above (maximum 100 m); EIA/TIA-568 100 STP (maximum 100 m) PoE Standard: IEEE 802.3af IEEE 802.3af, IEEE 802.3at Port 14, up to 15.4 W per port Port 18, up to 30 W per port Port 14, up to 30 W per port Port 18, up to 30 W per port 41 W*** 63 W*** 65 W*** 62 W*** 61W*** Yes Yes 2.40 W (220 V/50 Hz no PD connected) 46.45 W (220 V/50 Hz with 41 W PD connected) 8.15 BTU/h (220 V/50 Hz no PD connected) 157.93 BTU/h (220 V/50 Hz with 41 W PD connected) 2.53 W (220 V/50 Hz no PD connected) 47.76 W (220 V/50 Hz with 41 W PD connected) 8.61 BTU/h (220 V/50 Hz no PD connected) 162.38 BTU/h (220 V/50 Hz with 41 W PD connected) 3.67 W (220 V/50 Hz no PD connected) 73.24 W (220 V/50 Hz with 63 W PD connected) 4 W (220 V/50 Hz no PD connected) 74.46 W (220 V/50 Hz with 65 W PD connected) 12.48 BTU/h (220 V/50 Hz no PD connected) 249 BTU/h (220 V/50 Hz with 63 W PD connected) 13.6 BTU/h (220 V/50 Hz no PD connected) 253.16 BTU/h (220 V/50 Hz with 65 W PD connected) Store and Forward 5.53 W (220 V/50 Hz no PD connected) 71.61 W (220 V/50 Hz with 62W PD connected) 18.81 BTU/h (220 V/50 Hz no PD connected) 243.47 BTU/h (220 V/50 Hz with 62W PD connected) 7.3 W (220 V/50 Hz no PD connected) 76.96 W (220 V/50 Hz with 61 W PD connected) 24.82 BTU/h (220 V/50 Hz no PD connected) 261.66 BTU/h (220 V/50 Hz with 61 W PD connected) 1 Gbps 1.2 Gbps 1.8 Gbps 10 Gbps 16 Gbps 20 Gbps 2k, Auto-learning, Auto-aging 4k, Auto-learning, Auto-aging YES (Ports 1-4) YES (Ports 1-4/Ports 1-8) YES (Ports 1-2) YES (Ports 1-4) No YES (Ports 1-8) No YES (Ports 1-8) YES (Ports 1-4) YES (Ports 1-4) YES (Ports 1-8) YES (Ports 1-4) YES (Ports 1-8) Yes 0 3.9*3.9*1.0 in. (99.8 x 98 x 25 mm) 6.2*4.0*1.0 in. (158 x 101 x 25 mm) Power, Link/Act, PoE Status, PoE MAX 6.7X3.9X1.1 in. (171 x 98 x 27 mm) 3.9*3.9*1.0 in. (99.8 x 98 x 25 mm) CE, FCC, RoHS 6.2*3.9*1.0 in. (158 x 99 x 25 mm) 8.2*4.9*1.0 in. (209 x 126 x 26 mm) Note: * LS105LP and LS106LP only support IEEE 802.3af, and provide PoE Power up to 15.4W for each PoE port; other switches support IEEE 802.3af/at, and provide PoE Power up to 30W for each PoE port. ** The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may vary from the quality of the cables. *** PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors. w w w.t p - l i n k .co m Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders. © 2023 TP-LinkAdobe PDF library 15.00 Adobe Illustrator 24.1 (Windows)