To activate this suite of additional features, by press and hold the 4 key until the display shows either off or ON. Press and hold again to change the status.
Tecsun PL-990 Hidden Features ... The receiver will pair with your audio source and you will be able to hear audio tracks from your BT device on the PL-990.
Tecsun PL-990 Hidden Features With the receiver turned on: Additional features: To activate this suite of additional features, by press and hold the 4 key until the display shows either off or ON. Press and hold again to change the status. DNR (Dynamic Noise Reduction). Press and hold the 6 key to turn the DNR on or off. Muting Threshold. Press and hold the 9 key until the current level flashes in the display. Adjust the fine tuning control to change the level. 00 means no level is set. Press the 9 key to save. FM De-Emphasis. Press and hold the 5 key to change between 50 and 75uS. Press the 5 key to save. Australia and Europe use 50uS, the USA and Japan use 75uS. Line Output Level. Press and hold the 7 key, and adjust using the fine tune control. Separate level settings can be made for AM, USB, LSB and Sync modes. With the receiver turned off Bluetooth Playback. Press and hold the RADIO/MP3 button to turn Bluetooth playback on and off. Once turned on, switch the receiver On and press the radio/MP3 button. The receiver will pair with your audio source and you will be able to hear audio tracks from your BT device on the PL-990. Pressing the RADIO/MP3 button again reverts to radio function. Seconds Display. To display seconds, press and hold the 8 key until the display shows seconds. Press and hold again to turn seconds display off. 24/9 Powells Road, Brookvale NSW Australia 2100 hello@tecsunradios.com.au www.tecsunradios.com.auAdobe Illustrator CC 22.1 (Macintosh) Adobe PDF library 15.00