Dell S2421H/S2721H Monitor Quick Start Guide

Product Overview

This guide provides instructions for setting up your Dell S2421H or S2721H monitor.

Included Components: Monitor panel, stand base, stand upright, power cable, HDMI cable, and documentation.

Step 1: Assemble the Monitor Stand

Follow these steps to assemble the monitor stand:

• Align the stand upright with the stand base.
• Slide the upright into the base and secure it using the integrated locking mechanisms.
• Ensure all parts are firmly attached.

Step 2: Unpack the Monitor

Carefully remove the monitor panel from its packaging.

Step 3: Attach the Stand to the Monitor

Connect the assembled stand to the back of the monitor panel:

• Align the stand's mounting bracket with the VESA mounting area on the back of the monitor.
• Slide the stand into place until it clicks or locks securely.
• Ensure the stand is firmly attached before proceeding.

Step 4: Connect Video Cables

Connect your computer to the monitor using the provided cables:

• Identify the video input ports on the monitor, typically labeled HDMI 1 and HDMI 2.
• Connect one end of the HDMI cable to the desired HDMI port on the monitor.
• Connect the other end of the HDMI cable to the corresponding HDMI output port on your computer.

Step 5: Connect Power and Computer

Connect the monitor to a power source and ensure the video connection is complete:

• Connect the power cable to the monitor's power input port.
• Plug the other end of the power cable into a wall outlet or surge protector.
• Verify the HDMI cable is securely connected to both the monitor and the computer.

Step 6: Final Placement and Power On

Place the monitor on your desk and power it on:

• Place the monitor in your desired location.
• Press the power button on the monitor to turn it on.

Monitor Adjustments

The monitor stand allows for tilt adjustments:

• Tilt: The monitor can be tilted forward by 5 degrees and backward by 21 degrees for optimal viewing angles.