Café™ 20.2 Cu. Ft. Fully Integrated Installation French-Door Bottom Freezer

Features & Benefits

Total Capacity

20.2 Cu. Ft.

Fresh Food Capacity

13.8 Cu. Ft.

Freezer Capacity

3.5 Cu. Ft.

Convertible Drawer Capacity

2.9 Cu. Ft.

ADA Compliant

No

Energy Star

No

Depth

Built-In

Ice & Water Dispenser

No

Icemaker

Yes

Water Filtration

Yes

Control Type

Upfront Electronic Digital Temperature Display

Internal Lighting

LED

Colors Available

Stainless Steel

Case Color

Unfinished Sides or Panel Required

Configuration

Full door

Temperature Management

Integrated Air Management System

Cabinet Shelves (Total FF & FZ)

4 Half Width; 1 Full Width

Door Bins (Total FF & FZ)

6 Half Width Adjustable

Fresh Food Cabinet Shelf Features

4 Adjustable glass; 1 fixed

Glass Shelves

Yes

Fresh Food Cabinet Pans/Drawers

2

Clear Bins and Pans

Yes

Fresh Food Drawer Features

Adjustable Humidity

Fresh Food Door Bins

6

Fresh Food Door Bins Type

6 half width adjustable

Freezer Drawer

Equipped with Ice Maker and Divider Slide

Filter Change Indicator

Yes - on upfront control

GE Water Filtration System

XWFE Leak Detect in top above case

Leveling System

4 Point (2 adjustable back rollers, 2 adjustable front legs)

Convertible Drawer

4 Temperature Settings: cold drinks, meat, snacks or frozen items

Refrigerant Type

r600a

Sealed System Design

Yes

Defrost Type

Automatic defrost

Connected

ConnectPlus WiFi; App details; Display/change temperature; Alert if fresh food temperature is too high; Alert if freezer temperature is too high; Alert if water filter needs to be placed; Alert for software OTA updates

Warranty

Labor Warranty

Limited 1-year entire appliance

Parts Warranty

Limited 5-year sealed refrigerating system

Weights & Dimensions

Overall Depth

24-3/4 in.

Overall Width

35-3/4 in.

Overall Height

83-7/8 in.

Case Depth Without Door

22-1/8 in.

Depth Without Handle

24-3/4 in.

Height to Top of Case

83-11/16 in.

Approximate Shipping Weight

590 lbs.

Net Weight

550 lbs.

Additional Accessories

• CXSB4H4PVBZ Brushed Bronze Optional Kits
• CXSB4H4PVBT Brushed Black Optional Kits
• CXSB4H4PVCU Brushed Copper Optional Kits
• CXSB4H4PVCG Brushed Brass Optional Kits
• CXSB4H4PVFB Flat Black Optional Kits

Dimensions and Installation (Fully Integrated)

Flooring Requirements

For proper installation, this refrigerator must be placed on a level surface of hard material that is at the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 1500 lbs. Protect the finish of the flooring by cutting a large section of the cardboard carton and placing it under the refrigerator during work.

Water and Electrical Locations

The installation opening must be prepared with the electrical and water supply located as shown in the diagrams.

Finished Return

A minimum 6" (15.2 cm) finished return matching the cabinet exterior is recommended on the interior on all sides and the top at the front of the opening.

Additional Specifications

A 120 volt, 60Hz, 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. Electrical must be located on the rear wall as shown.

Diagrams (Fully Integrated)

Front View Diagram Description: Shows the overall height of 84 inches (213.4 cm), and a width of 36 inches (91.4 cm). It indicates electrical and water rough-in locations: 'ELEC W' is shown, with dimensions for water line entry (9", 6", 2 1/2") and electrical receptacle location (8", 9", 18" from the bottom). A 6-inch (15.2 cm) finished return is depicted.

Side View Diagram Description: Shows the overall depth of 25 inches (63.5 cm) and a 6-inch (15.2 cm) finished return.

Dimensions and Installation (Standard Installation)

Flooring Requirements

For proper installation, this refrigerator must be placed on a level surface of hard material that is at the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 1500 lbs. Protect the finish of the flooring by cutting a large section of the cardboard carton and placing it under the refrigerator during work.

Water and Electrical Locations

The installation opening must be prepared with the electrical and water supply located as shown in the diagrams.

Additional Specifications

A 120 volt, 60Hz, 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. Electrical must be located on the rear wall as shown.

Single Installation Accessory Kit

ZKW36V: Single Installation retrofit/standard installation kit is required when installing in a 35 1/2" wide and 24" deep cut-out.

Product at Standard trim dimensions: 36 13/16" (93.5 cm) wide, 28 3/8" (72.1 cm) deep, and 84 1/2" (214.6 cm) height.

Diagrams (Standard Installation)

Front View Diagram Description: Shows the overall height of 84 inches (213.4 cm), and a width of 35 1/2 inches (90.1 cm). It indicates electrical and water rough-in locations: 'ELEC W' is shown, with dimensions for water line entry (9", 6", 2 1/2") and electrical receptacle location (8", 9", 18" from the bottom). A 6-inch (15.2 cm) finished return is depicted.

Side View Diagram Description: Shows the overall depth of 24 inches (60.9 cm) and a 6-inch (15.2 cm) finished return.

Product Clearances

The factory set 115° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. ?

Grounding the Refrigerator

IMPORTANT - PLEASE READ CAREFULLY

For personal safety, this appliance must be properly grounded. The power supply cord is equipped with a three-prong (grounding) plug which mates with a standard three-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard. Ensure the wall outlet and circuit are checked by a qualified electrician to confirm proper grounding. If a standard 2-prong wall outlet is encountered, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

DO NOT under any circumstances, cut or remove the third (ground) prong from the power cord. ❌

DO NOT use an adapter plug to connect the refrigerator to a 2-prong outlet. ❌

DO NOT use an extension cord with this appliance. ❌

Further Information

For answers to your Café™ product questions, visit the website at cafeappliances.com.

Document Version: 12/22 (© 2022 GE Appliances)