Features
- Driver: 62 mm x 34mm Dan Clark Audio designed single-ended planar magnetic
- Titanium "Memory Metal" headband
- Auto-adjusting Suspended Comfort Strap
- THD less than 0.1% measured 1kHz @ 94dB
- Synthetic protein, leather/suede ear pads
- RMS Deviation of .5 dB from 20 Hz - 10 kHz
Safety Instructions
- Read the instruction manual carefully and completely before using the headphones.
- Keep the headphones, accessories, and packaging out of reach of pets and children.
- Protect your hearing by avoiding high volume levels. Permanent hearing damage can occur when headphones are used at high volumes for extended periods.
- Use only attachments, accessories, and spare parts supplied or recommended by Dan Clark Audio.
- Do not expose the headphones or accessories to extreme temperatures.
- Always keep the headphones dry.
Attaching a Cable
- All Dan Clark Audio planar-magnetic products use push-pull self-latching connectors.
- To attach your cable, hold the male connector by the boot and insert it into the headphone jack while rotating until it keys in and clicks into place.
- To release the cable, pull down on the top of the connector's metal jacket.
Diagram showing a headphone jack and a detachable cable connector. The connector has a 'Boot' and a 'Metal Jacket'. An arrow indicates inserting the connector into the jack, with a visual cue of a 'click' sound when properly seated.
Product Care
- The synthetic protein leather ear pads can be gently cleaned with a moistened cloth. Do not use cleaners or protectants, as this may damage the pads.
- Clean any other surfaces with a clean, dry, and lint-free microfiber cloth.
- For the first 50 to 100 hours of use, the headphones will undergo a 'burn-in' period during which the sound signature will stabilize.
Storing the Headphones
Diagram illustrating the process of storing the headphones in four steps. Step 1: Remove headphones from head. Step 2: Fold earcups inwards. Step 3: Fold the headband. Step 4: Place folded headphones into the carrying case. An inset shows the correct orientation for placing the headphones in the case, marked with a checkmark.
Warranty
Dan Clark Audio provides a 2-year warranty for all headphones, effective from the date of purchase. This warranty covers the headphone cable and accessories.
The warranty is transferable, provided that documentation of the original purchase confirms the headphones were sold by an authorized Dan Clark Audio reseller. The warranty is void and non-transferable for "Gray Market" headphones (e.g., international customers purchasing from the grey market, shipping to a friend or sibling, using forwarding for export to any country with an authorized reseller).
Warranty does not cover damage caused by the owner (e.g., dismantling the unit, dropping, damage by failure of electronics, etc.), it is naturally occurring compression or wear that may occur with age, and all the normal wear and tear of using the product. Dan Clark Audio reserves the right to determine if the product has been misused, or if the product received from our suppliers will repair or replace defective goods at our discretion.
Registration
Visit https://DanClarkAudio.com/register to register your product.
3366 Fox St. Suite 200 San Diego, CA 92110 +1 (619) 501-6313
Logo: Dan Clark Audio
Markings: CE conformity mark
