EasySens Radio Switch 55x55
Universal Wireless Switch
Datasheet
Subject to technical alteration
Date Issue: 7/14/2025
Available Finishes: Fits all 55x55 switch ranges. Available in pure white brilliant, pure white matt, aluminium, and anthracite.
Brand: Thermokon
Technology: HOME OF SENSOR TECHNOLOGY
Application
Battery-less radio control for lighting and blinds. The self-powered wireless technology enables flexible installation on glass and wall plaster via double-sided adhesive pads or screws.
This product is intended for use as part of an automation solution for (functional) buildings. It transmits sensor data within a building over short distances unencrypted by radio to suitable receivers. No personal data or location data is transmitted.
The product cannot communicate directly with the Internet and is not intended for applications that use the Internet to forward unprocessed sensor data. Automation stations that forward data via the Internet, e.g. to visualise the building status, must ensure that the data to be forwarded is encrypted as required by law.
Types Available
Radio Switch 55x55 - Design Light (0 | I)
- Radio switch 2-channel light 55x55 w/o frame (1 switch rocker)
- Radio switch 4-channel light 55x55 w/o frame (2 switch rocker)
Radio Switch 55x55 - Design Shutter/Blind (AV)
- Radio switch 2-channel shutter/blind 55x55 w/o frame (1 switch rocker)
- Radio switch 4-channel shutter/blind 55x55 w/o frame (2 switch rocker)
Customization: W/o printing or Special printing possible.
Color Options: All types are available in the colours pure white gloss, pure white silk matt, aluminium and anthracite.
Compatibility: Radio switches suitable for standard 55x55 switch range frames.
Product Testing and Certification
CE Marking ?
Declaration of conformity: The declaration of conformity of the products are available on our website: https://www.thermokon.de/direct/en-gb/categories/wireless-switches-55x55
Image similar
Security Advice – Caution
! The installation and assembly of electrical equipment should only be performed by authorized personnel.
The product should only be used for the intended application. Unauthorised modifications are prohibited! The product must not be used in relation with any equipment that in case of a failure may threaten, directly or indirectly, human health or life or result in danger to human beings, animals or assets. Ensure all power is disconnected before installing. Do not connect to live/operating equipment.
Please comply with:
- Local laws, health & safety regulations, technical standards and regulations
- Condition of the device at the time of installation, to ensure safe installation
- This data sheet and installation manual
Notes on Disposal
The crossed-out wheelie bin symbol ? indicates that the product or removable batteries must not be disposed of with household or commercial waste. Within the EU, you are legally obliged to dispose of the product separately and appropriately in accordance with the national laws of your country. Alternatively, please contact your supplier or Thermokon Sensortechnik GmbH. Further information can be found at: www.thermokon.com
Information about EasySens® (Radio) / AirConfig General Usage
PDF ? EasySens® - airConfig: Basic information about EasySens® radio and about general usage of our airConfig software, please download from our website.
Overview of the Radio Telegrams
PDF ? EEP: The structure of the data contained in the telegram can be found in the EEP (EnOcean equipment profile) list provided by the EnOcean Alliance.
Technical Data
| Parameter | Specification |
| Radio technology | EnOcean (IEC 14543-3-10), transmission power <10 mW |
| Frequency | 315 MHz, optional 902 MHz |
| Power supply | maintenance-free, electrodynamic energy generator |
| Transmission interval | when pressing the switches |
| No. of buttons | 2-channel (1 switch), 4-channel (2 switches) |
| Labelling | O, I (version light), A (version blinds), special printing available on request |
| Enclosure | pure white brilliant, pure white matt, aluminium, anthracite |
| Ambient condition | -13..+149 °F, max. 85% rH non-condensing |
| Mounting | to be mounted flat onto the surface using adhesive foil (included) or screws |
Mounting Advices
Visual Description of Mounting Components:
- Clean surface: A clean surface is required for proper adhesion.
- Base frame: A base frame provides a mounting surface.
- Switch range frame: A frame that fits the switch.
- Adapter: An adapter may be used for mounting.
- Radio module: The core radio component.
- Rocker switch covers: The visible switch covers.
Important Note: ? Make sure that no dust can get inside the device.
