Health o meter HDC100 Baby/Toddler Scale

Introduction

Thank you for purchasing the Health o meter for Kids™ HDC100 Baby/Toddler Scale. This scale is designed for accurate and reliable weighing of babies and toddlers in both pounds and kilograms, up to a maximum of 60 lbs (27kg). Key features include the 'Zero Out' function for deducting added weight (like blankets or diapers) and the 'Hold' feature to display a steady, average weight even if the baby moves. The tray can be removed as the child grows.

Safety Information

• Intended for home use with adult supervision. Never leave a child unattended on the scale.
• Do not place the unit on slippery surfaces.
• Ensure the tray is properly locked before placing the baby on the scale.
• Do not immerse the scale in water or pour liquids onto it.
• Do not use while bathing.
• Note: Weight can vary slightly throughout the day and from day to day. Consult a physician if concerned about weight fluctuations.

Preparing the Scale for Use

1. Remove the battery cover on the back of the scale and insert a 9V battery (not included). Replace the cover.
2. If weighing an infant who cannot stand, attach the tray to the scale. Turn the locking nut counter-clockwise to secure the tray.

Operating the Scale

Place the scale on a hard, flat surface. Avoid rugs or soft surfaces.

1. Press the ON/OFF button. The display will show "8888".
2. Wait for the display to show "0:0" or "0.00".
3. Select pounds (0:0) or kilograms (0.00) by pressing the LB/KG button.

Note: "0:0" indicates pounds/ounces mode; "0.00" indicates kilograms/grams mode.

Using the Scale With the Tray

Ensure the tray is securely locked before use.

1. Press ON/OFF and follow the operating instructions.
2. Lay the baby on the tray and read the display.
3. If the baby is moving, press the HOLD button to lock the correct weight. The display will show "hold" and then the average weight, with a [downward arrow] symbol flashing.

The scale will automatically turn off after 2 minutes.

Using the Scale Without the Tray

1. Remove the tray by turning the locking nut clockwise.
2. Insert the 4 rubber plugs and the plastic cover tab into the locking tray hole.
3. Hold your baby upright, placing their feet to distribute weight evenly. The LCD display will show their weight.
4. If necessary, press the HOLD button to lock the baby's weight.

Using the 'Zero Out' Feature

This feature is useful for weighing a baby with a blanket or diaper.

1. Place the blanket or diaper on the tray.
2. Press the ZERO OUT button until the display reads "0:0" or "0.00".
3. You can now accurately weigh your baby.

Using the 'Hold' Feature

Use this feature when your baby is moving.

1. Press the HOLD button.
2. The display will first show "hold," then the baby's average weight will be displayed with a [downward arrow] symbol flashing.

Taking Care of Your Scale

• Periodically wipe the scale with a damp cloth to remove dust.
• Handle the scale carefully; it is a delicate instrument.
• Do not use abrasive cleansers, as they can damage the scale's surface.

Symbols and Cautions

• Lo: Appears when the battery needs replacement.
• Err: Appears when there is too much weight on the scale.
• ---: If this appears, turn the scale off and then on again. Wait for "0:0" or "0.00" before weighing.

Caution:

• Weight exceeding the capacity (60 lb / 27 kg) may damage the scale.
• This scale is designed for household use only.
• This scale is not waterproof; avoid contact with excessive moisture.