User Guide for COMDRONIC models including: v4-AC7HP, AC7-HP High Pressure Water Manometer, AC7-HP, High Pressure Water Manometer, Pressure Water Manometer, Water Manometer, Manometer

Microsoft PowerPoint - v4-AC7HP QuickStart Handset Overview New Buttons Sep-22.pptx

Comdronic

AC7-HP Handset Overview

Comdronic AC7-HP Electronic Manometer

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
  

  File Info : application/pdf, 1 Pages, 576.11KB

  Document Document

PRESS ANY BUTTON TO SWITCH THE AC7 `ON'.

AC7-HP+ Quick-Start Guide

PROTECT FROM FROST IN STORAGE

TOTAL SYSTEM PRESSURE = 20 BAR MAX.

Connect the RED connection tube to this connector.

Connect the BLUE connection tube to this connector.

Internal strainers protect the sensor-unit from small dirt particles.
These are service parts. Note: blocked strainers will slow performance and reduce accuracy.
Equalising valve.
Press to access the handset's on-board valve database.
Press to cancel an entry or to return to a previous screen. Also
use to switch the AC7 `OFF'.

? 

Securing ring. Use the lanyard supplied to suspend the AC7 from pipework (or similar) while taking readings.
Press to set a zero datum before taking a measurement.
Use     buttons for menu navigation and to enter numerical data ­ see note below.
Press to toggle between available display screens. Also use to accept menu selections and screen entries. Press to enter menu screens.

Numeric entries: use the   buttons to increase or decrease values. Use the  button to add a digit. If a decimal point is required, press the  button when the zero digit is showing. To enter a negative number, press the ZERO button before any number is added.