Bresser Analyth STR Bino Microscope

Safety Precautions

CAUTION! This microscope and its accessories may involve sharp and pointed aids. Store the device and accessories out of reach of children. Children should only use the microscope under adult supervision. Keep packing materials (plastic bags, rubber bands, etc.) away from children.

Product Overview

The Bresser Analyth STR Bino is a high-quality optical instrument designed for detailed observation.

All Parts (Fig. 1-4):

• 1 Eyepieces
• 2 Dioptre scale
• 3 Binocular head
• 4 Focus wheel
• 5 Incident light illumination
• 6 On/Off switch
• 7 Brightness control (incident light)
• 8 Brightness control (transmitted light)
• 9 Transmitted light illumination
• 10 Microscope stage with object plate
• 11 Object clamps
• 12 Lens holder (rotatable)
• 13 Battery compartment
• 14 Power supply connection
• 15 Dust cover
• 16 Object plate (black/white)
• 17 Power supply
• 18 Rubber eyecups (2 pieces)
• 19 Carrying handle
• 20 WF 20x eyepiece (2 pcs.) only 5803860

1. Choosing a Place for the Microscope

Select a suitable, stable, and level surface for the microscope. Ensure the power socket is easily accessible for disconnecting the device.

2. Illumination

The Analyth STR offers three illumination options: incident light, transmitted light, and both. Connect the power supply and turn on the main switch (6). Brightness for incident and transmitted light can be adjusted separately using controls (7) and (8). The selected settings are retained after switching off.

The microscope can also be powered by batteries (AA type). Insert batteries into the compartment (13) on the underside, observing correct polarity. The microscope can be used with the power supply even when batteries are inserted; however, rechargeable batteries will not be charged.

3. Observation

Place the object on the stage (10) and secure it with clamps (11) if needed. Adjust magnification by rotating the lens holder (12). Start with the lowest magnification (1x). Look through the eyepieces (1) and adjust focus using the wheel (4).

4. Focusing and Dioptre Compensation

Set the dioptre scale (2) to the middle position. Close your left eye and focus for the right eye using the focus wheel (4). Then, close your right eye and adjust focus for the left eye using the dioptre scale. This aligns the microscope to your vision. Note the dioptre scale setting for future use.

5. Eye Distance

Adjust the interpupillary distance by moving the eyepieces until a comfortable view is achieved.

6. Replacing the Eyepieces (optional with 5803800)

Loosen the clamp screw on the underside of the eyepiece holder to remove and replace eyepieces. The screws prevent the eyepieces from falling out.

Note: The LED illumination has a lifespan of approximately 20,000 hours. Contact the service center for technical issues.

7. Adjusting the Friction of the Focusing Drive

If the microscope head droops due to its weight, adjust the friction by turning the two focus wheels in opposite directions.

8. Cleaning and Maintenance

Keep optical surfaces free from dust and fingerprints. Clean the microscope body with a slightly damp soft cloth. Use a separate soft, lint-free cloth with a small amount of alcohol for optical surfaces. After use, protect the microscope with the dust cover (15).

Proper maintenance ensures the microscope retains its optical quality and value.

9. Technical Data

Note: Total magnification is calculated by multiplying objective magnification by eyepiece magnification.

10. Declaration of Conformity

10.1. CE Conformity

Bresser GmbH has issued a Declaration of Conformity in line with applicable directives. This can be downloaded at: https://www.bresser.de/download/58038X0/CE/5803800-5803860_CE.pdf

10.2. UKCA Conformity

Bresser UK Ltd. has issued a Declaration of Conformity in line with applicable directives. This can be downloaded at: https://www.bresser.de/download/58038X0/UKCA/5803800-5803850_UKCA.pdf

11. Disposal

Dispose of packaging materials sorted by type. Contact your local waste disposal service or environmental authority for proper disposal information.

Do not dispose of electrical equipment with household waste. In accordance with European Directive 2002/96/EC (WEEE), electrical equipment must be collected separately and returned to an environmentally compatible recycling facility.

Discharged batteries and damaged rechargeable batteries must be disposed of at special battery collection points. Information is available from your local disposal agent or authority.

12. Warranty & Service

The regular warranty period is 5 years from the date of purchase. Full warranty terms and service details can be found at www.bresser.de/warranty_terms.

Service Contact Information

DE AT CH BE

For product questions or claims, contact the Service Center via email:

E-Mail: service@bresser.de

Telefon: +49 2872 8074210

BRESSER GmbH, Gutenbergstr. 2, 46414 Rhede, Deutschland

NL BE

For product questions or claims, contact the service center via email:

E-Mail: info@bresserbenelux.nl

Telefoon: +31 528 232476

BRESSER Benelux, Donau 5-12, 7908 HA Hoogeveen, Nederland

GB IE

Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail:

E-Mail: service@bresseruk.com

Telephone: +44 1342 837098

BRESSER UK Ltd., Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

ES PT

For product questions or claims, contact the technical service center (preferably by e-mail):

E-Mail: servicio.iberia@bresser-iberia.es

Teléfono: +34 91 67972 69

BRESSER Iberia SLU, c/Valdemorillo, 1 Nave B, P.I. Ventorro del Cano, 28925 Alcorcón Madrid, España

FR BE

For questions concerning this product or in case of claims, please contact our service center (preferably via e-mail):

E-Mail: sav@bresser.fr

Téléphone: 00 800 6343 7000

BRESSER France SARL, Pôle d'Activités de Nicopolis, 314 Avenue des Chênes Verts, 83170 Brignoles, France