SONOFF S60TPG Smart Plug Quick Start Guide
Model: S60TPG
Brand: SONOFF
Introduction
Welcome to the SONOFF S60TPG Quick Start Guide. This guide will help you set up your SONOFF S60TPG smart plug, designed for seamless integration into your smart home ecosystem.
The S60TPG is a smart plug featuring a UK Type G plug standard, suitable for use in regions with compatible outlets. It allows you to remotely control appliances connected to it via the eWeLink app.
Getting Started with the eWeLink App
To begin using your SONOFF S60TPG, you will need the eWeLink app. The app is available for both iOS and Android devices.
Download and Install the eWeLink App
Search for "eWeLink" in your device's app store (Apple App Store or Google Play Store) and download the application.
Alternatively, you can scan the QR code provided on the device packaging or within this guide to directly access the download link.
[QR Code for eWeLink App Download]
Account Creation and Login
Open the eWeLink app. If you are a new user, you will need to create an account. Follow the on-screen prompts to register using your email address. Existing users can log in with their credentials.
Adding Your S60TPG Device
Follow these steps to add your SONOFF S60TPG smart plug to the eWeLink app:
Power On: Ensure your S60TPG smart plug is plugged into a power outlet. The indicator light should start blinking rapidly, indicating it is in pairing mode. If it is not blinking rapidly, press and hold the power button on the plug for approximately 5 seconds until the indicator light blinks rapidly.
Add Device in App: Open the eWeLink app and tap the '+' icon, usually located in the top right corner of the home screen, to add a new device.
Select Device Type: Choose "Smart Plug" or a similar category from the list of devices. The app may automatically detect the device if Bluetooth is enabled.
Pairing: Follow the app's instructions. You may be prompted to scan a QR code located on the S60TPG device itself or its packaging. Alternatively, you might need to select your Wi-Fi network and enter the password.
[Textual description of a diagram showing a plug with a QR code and an arrow pointing to a smartphone screen displaying the eWeLink app with a '+' icon and a pairing screen.]
Note: Ensure your mobile device is connected to a 2.4GHz Wi-Fi network, as the S60TPG may not support 5GHz networks during the initial setup.
Device Added: Once the pairing is successful, the S60TPG will appear in your device list within the eWeLink app. You can now rename the device (e.g., "Living Room Lamp") for easier identification.
Basic Operation
Once added, you can control your connected appliance through the eWeLink app:
- On/Off Control: Tap the power icon next to your device name in the app to turn the connected appliance on or off.
- Scheduling: Set schedules to automatically turn the plug on or off at specific times.
- Timers: Use countdown timers for automatic shut-off.
Important Information
Safety Precautions:
- Ensure the total power of connected appliances does not exceed the maximum rated power of the S60TPG.
- Do not expose the device to water or moisture.
- For indoor use only.
- Always unplug the device before cleaning.
Troubleshooting:
If you encounter issues, try restarting the plug and your Wi-Fi router. Ensure the Wi-Fi password entered is correct. Refer to the full user manual or the eWeLink app's help section for more detailed troubleshooting steps.
