Handbuch für behringer edison ex1 stereo image herunterladen als download
EX1 ENGLISH Technical Specifications Version 1.0 May 2000 www.behringer.com EDISON ® EX1 EDISON Stereo image processor with phase meter s New psycho-acoustic processor for total manipulation of spatial content s Releases the untapped stereo resources of any stereo recording s Creates and enhances 3D spatial images such as width and depth s No decoding needed during reproduction s Fully mono compatible s Accurate phase correlation meter to measure any recording for mono compatibility s Servo-balanced inputs and outputs s Relay controlled hard-bypass with auto-bypass function during power failure (failsafe relay) s Cut-in delay to avoid switch-on thumps s BEHRINGER's extremely low noise audio op-amps s Illuminated switches s 41 detent potentiometers s XLR and 1/4" jack connectors s High-performance output transformer BEHRINGER OT-1 retrofittable s Manufactured under ISO9000 certified management system 2 SPECIFICATIONS Analog inputs Connectors Type Impedance Nominal operating level Max. input level CMR @ 1 kHz XLR and 1/4" jack RF filtered, servo-balanced input 60 k, balanced -10 dBV to +4 dBu +20 dBu balanced and unbalanced > 40 dB Analog outputs Connectors Type Impedance Max. output level XLR and 1/4" jack electronically servo-balanced output stage (optional transformer-balanced), automatic level correction for unbalanced use (correction = 6 dB) 40 balanced and unbalanced +26 dBu balanced, +21 dBu unbalanced System specifications Bandwidth Noise THD Crosstalk 5 Hz to 100 kHz, +0/-1 dB -92 dBu (20 Hz to 22 kHz, all controls centered) 0.005 % typ. @ +4 dBu, 1 kHz, gain 1 (all controls centered) > -50 dBu @ 20 kHz Stereo processor Type Stereo spread LMF spread Balance Center distance Output gain "Stereo image" processor variable, MONO to WIDE variable, NARROW to WIDE variable, LEFT to RIGHT variable, FAR to NEAR variable, -12 dB to +12 dB Phase correlation meter Type Operating range synchronized rectifier circuit -30 dBu to +20 dBu Function switches In/Out relay controlled hard-bypass LED indicator for In/Out switch Power supply Mains voltages Fuse Mains connection USA/Canada 120 V ~, 60 Hz U.K./Australia 240 V ~, 50 Hz Europe 230 V ~, 50 Hz general export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz 100 - 120 V ~: T 315 mA H 200 - 240 V ~: T 160 mA H standard IEC receptacle Physical Dimensions (H * W * D) Net weight Shipping weight 1 3/4" (44.5 mm) * 19" (482.6 mm) * 8 1/2" (217 mm) app. 3.0 kg app. 4.3 kg BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. 3 The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER and EDISON are registered trademarks. ALL RIGHTS RESERVED. © 2000 BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30 4Acrobat Distiller 3.02 Adobe PageMaker 6.52