Download User manual – Spotlight
Manuale utente - User manual Rel. 1.02 ProfiLED Hyperion 300 White PR HY LED 300 White ATTENZIONE: Prima di usare questi apparecchi, leggere attentamente le istruzioni che seguono. Spotlight srl non potrà essere ritenuta responsabile di danni derivanti dalla non osservanza di dette istruzioni. SAFETY WARNING: Before using this product, read the present instructions carefully. Spotlight srl will not be responsible for damage resulting from instructions not being followed. 15 17 1 2 65 Fig. 1 16 14 4 3 13 7 12 11 10 9 8 2 PR HY LED 300 White Connessioni elettriche e DMX - Electrical and DMX connections CONSOLE DMX IN DMX THRU 100-240V IN OUT Fig. 2 DMX IN IN DMX THRU OUT DMX IN IN DMX THRU OUT Dimensioni (mm) e peso - Dimensions (mm) and weight Profile Standard Zoom (ZS) 14,4 kg 335 760 Profile Wide Zoom (ZW) 13,9 kg 335 640 470 470 Fig. 3 3 PR HY LED 300 White DESCRIZIONE DEL PROIETTORE Riferendosi ai disegni di pag. 2: Staffa di sospensione Maniglia per regolazione inclinazione del faro Guide porta accessori Guida di bloccaggio e rilascio accessori Manopole regolazione zoom e messa a fuoco Leve comando lamelle sagomatrici Display e pulsanti menu Connettore DMX THRU Connettore DMX IN Fusibile Alimentazione OUT (connettore Powercon) Alimentazione IN (connettore Powercon) Manopola di regolazione intensità luminosa (in modalità Potenziometro Locale) Vite per rimozione avamproiettore Pomello di fermo rotazione avamproiettore Vite sportello avamproiettore per pulizia lenti Tettuccio scorrevole vano portagobo INDICAZIONI GENERALI Il proiettore in Vs possesso risponde alle Direttive Europee 2006/95/CE, 2004/108/CE e 2011/65/UE. La targhetta che è sistemata sul fianco del proiettore, contiene le seguenti informazioni: · Modello · Tensione di alimentazione in V · Potenza in W · Indice di protezione IP · Massima temperatura ambiente ammissibile in °C INSTALLAZIONE · Il proiettore è progettato esclusivamente per impiego professionale. · Non puntare il faro direttamente negli occhi · Si prega di prestare la dovuta attenzione alle note riportate sull'etichetta dell'apparecchio. · Ricordarsi di collegare la fune di sicurezza se previsto dalle norme di sicurezza locali. · ll proiettore può essere usato sia sospeso sia montato su cavalletto. ATTENZIONE: L'APPARECCHIO DEVE ESSERE COLLEGATO A TERRA CONNESSIONI ELETTRICHE Il vostro faro è stato progettato per una tensione di alimentazione da 100 a 240V, 50/60 Hz. Prima e durante l'installazione osservare le seguenti norme: · Verificare sempre l'efficienza del collegamento a terra della linea in uso. · Verificare che la tensione di alimentazione corrisponda a quella dell'apparecchio · L'apparecchio è previsto per uso all'interno: pertanto deve essere protetto dall'umidità e dalla pioggia se usato in condizioni diverse (IP 20). ATTENZIONE: L'APPARECCHIO NON DEVE ESSERE COLLEGATO A UN DIMMER PUNTAMENTO Tramite la maniglia laterale si può allentare il bloccaggio del faro in una certa posizione e modificare la sua inclinazione. Lo stesso si può fare riguardo alla rotazione sull'asse verticale, facendolo ruotare sul perno di aggancio. Con le manopole si effettua la regolazione dello zoom allargando o stringendo il fascio di luce, e la regolazione della messa a fuoco. Tramite le quattro lamelle sagomatrici si può sagomare il fascio di luce per ottenere forme speciali. Allentando il pomello si può far ruotare l'avamproiettore, avendo cura di ribloccarlo poi nella nuova posizione. Allentando il pomello e la vite e ruotando l'avamproiettore sarà possibile ottenerne la rimozione. Per la pulizia delle lenti allentare la vite e far scorrere lo sportello di accesso all'avamproiettore, avendo cura di rimettere poi in posizione lo sportello e di rifissarlo. MANUTENZIONE Non aprire l'apparecchio. La manutenzione deve essere eseguita esclusivamente dal costruttore o dal suo servizio di assistenza. Sottoporre il faro a revisione almeno una volta all'anno per controllare l'integrità delle parti elettriche e meccaniche e l'aggiornamento del software. RICICLAGGIO Il prodotto deve essere riciclato o smaltito secondo la direttiva 2002/96/CE 4 PR HY LED 300 White MODALITA' DI FUNZIONAMENTO Il faro è predisposto per poter essere utilizzato in diverse modalità di funzionamento: · POTENZIOMETRO LOCALE · DMX (Wireless opzionale) · RDM CONTROLLO DELLA LUMINOSITA' IN FUNZIONE DELLA TEMPERATURA L'apparecchio è dotato di un controllo della temperatura del LED e della scheda driver, che per evitare un deterioramento anticipato in caso di sovratemperatura regola l'intensità luminosa. PRIORITA' INGRESSI La priorità di ingresso viene data: - in assenza di segnale DMX, sarà attivo il valore impostato con il potenziometro - in presenza di segnale DMX verrà seguito il relativo segnale e verrà ignorato il potenziometro - se il segnale DMX viene tolto o perso, viene mantenuto il livello impostato da DMX fino a quando non si agisce sul potenziometro, che imposterà il nuovo valore. MENU All'accensione viene visualizzata la versione software installata, a cui fa seguito la visualizzazione delle impostazioni di default, ovvero la Modalità di Funzionamento attualmente impostata. Se il faro è comandato dal dmx, il display dopo 3 secondi mostra una videata con modo e indirizzo dmx. 8 bit - 3CH 001 SETUP Altrimenti mostra lo stato del potenziometro: MANUAL Dimmer 18% LEGENDA SETUP BACK PREV NEXT ENTER Premendo il tasto setup si accede alle impostazioni e si naviga attraverso i sottomenu agendo sui pulsanti NEXT e PREV che in presenza di voci di tipo valore avranno la funzione di modifica in aumento (+) o diminuzione (-) dei valori stessi; le modifiche potranno essere confermate con il pulsante ENTER o annullate con il pulsante BACK. SETTINGS DMX SETTINGS OPTIONS INFO Struttura del menu - MENU GENERALE Voce Valori DMX SETTINGS OPTIONS INFO Def Descrizione Sottomenu impostazioni dmx Sottomenu configurazioni opzionali Sottomenu informazioni MENU DMX SETTING Voce Valori DMX ADDRESS 1 .. xxx il valore massimo dipende dalla personality DMX PERSONALITY 8 bit - 3CH 16bit - 6CH 8 bit - 1CH WIRELESS DMX Opzionale Def Descrizione 1 Indirizzo dmx 8 bit - 3CH Modo dmx Impostazioni gestione wireless dmx SETUP 5 PR HY LED 300 White MENU DMX SETTING - WIRELESS DMX Voce Valori Def Descrizione ACTIVATION ON / OFF OFF Accende/spegne il modulo di ricezione wireless DMX UNLINK Enter to Unlink Esc to Exit Consente di rimuovere l'associazione tra il faro e il trasmettitore wireless dmx MENU OPTIONS Voce Valori Def Descrizione LED DELAY OFF / 30, 60...600 ms 240 ms Tempo di ritardo del LED. Questo parametro è ignorato se si seleziona una personality che contiene il canale "Delay". DIMMING CURVE LINEAR QUADRATIC HALO QUADRATIC Correzione Gamma 500, 800, OUT 1000,1500... FREQUENCY 10000,11000, 12000...20000 Hz 1000 Hz Frequenza PWM LED FAN MODE (*) AUTO STANDARD SILENT Seleziona la modalità di funzionamento della ventola. Per AUTO alcuni modi dmx questo valore è ignorato. Si veda apposito paragrafo DISPLAY ROTAT. STANDARD ROTATED Rotazione di 180° del STANDARD display. Standard = tasti a destra del display. DISPLAY OFF STANDBY ON Selezionando ON il display si spegne OFF automaticamente dopo 60 secondi di inutilizzo DEFAULT SET Imposta il default per tutti i parametri utente FACTORY SETTING Riservato al Costruttore Impostazioni di fabbrica (*) Fan Mode Vi sono tre modalità di controllo ventole. L'utente può scegliere la modalità tramite il MENU OPTIONS. 1) modalità AUTO: le ventole sono regolate automaticamente in base alla temperatura del LED. 2) modalità STANDARD: le ventole sono mantenute sempre al valore predefinito. 3) modalità SILENT: le ventole sono mantenute sempre al valore minimo. MENU INFO Voce LED TEMPERAT. LED TIME UNIT TIME SOFTWARE VERS. Valori 25°C Xx Hr - xx Mn Xx Hr - xx Mn V. .... Data di rilascio Descrizione Temperatura sul LED Ore funzionamento LED Ore funzionamento apparecchio Visualizza versione software MODALITA' POTENZIOMETRO LOCALE In questa modalità è possibile regolare l'intensità luminosa agendo sul potenziometro "DIMMER". 6 MODALITA' DMX Il modo dmx è selezionabile dal menu DMX SETTINGS. Segue l'elenco dei modi dmx con la descrizione dei canali. Ch Nome 1 DIMMER 2 STROBE 3 SERVICE 8 bit - 3CH Valore DMX 0..255 Da spento (0) a full (255) - vedere apposito paragrafo - vedere apposito paragrafo - 16 bit - 6CH Ch Nome Valore DMX 1 DIMMER 0..255 Da spento (0) a full (255) 2 DIMMER FINE 0..255 Da spento (0) a full (255) 0..45 NON ATTIVO - Il delay è quello impostato a display 46..55 0 ms 56..65 30 ms 66..75 60 ms 76..85 90 ms 86..95 120 ms 96..105 150 ms 106..115 180 ms 116..125 210 ms 126..135 240 ms 3 DELAY 136..145 270 ms 146..155 300 ms 156..165 330 ms 166..175 360 ms 176..185 390 ms 186..195 420 ms 196.205 450 ms 206..215 480 ms 216..225 510 ms 226..235 540 ms 236..245 570 ms 246.255 600 ms Ventola da velocità MINIMA a 4 FAN 0..255 STANDARD (valori in Volt impostabili in menu Factory Setting) 4 STROBE - vedere apposito paragrafo - 5 SERVICE - vedere apposito paragrafo - PR HY LED 300 White Ch Nome 1 DIMMER 8 bit - 1CH Valore DMX 0..255 Da spento (0) a full (255) CANALE STROBE valido in tutte le modalità DMX in cui è previsto Ch Nome Valore DMX 0 STROBO NON ATTIVO 1..200 Strobo da lento (3,86 s.) a veloce (30 ms) xx STROBE 201..225 OFF Abilitazione comando SERVICE 226..230 (impostazione di un parametro del faro, e attendere per 5 sec.) 231..255 OFF 7 PR HY LED 300 White CANALE SERVICE valido se canale dmx STROBE in fascia SERVICE Ch Nome Valore DMX 0..5 INACTIVE 6..11 LED DELAY OFF 12..17 LED DELAY 30ms 18..23 LED DELAY 60ms 24..29 LED DELAY 120ms 30..35 LED DELAY 180ms 36..41 LED DELAY 240ms 42..47 LED DELAY 300ms 48..53 LED DELAY 360ms 54..59 LED DELAY 420ms 60..65 LED DELAY 480ms 66..71 LED DELAY 600ms 72..77 CURVE LINEAR 78..83 CURVE QUADRATIC 84..89 FREQUENCY 500Hz 90..95 FREQUENCY 800Hz 96..101 FREQUENCY 1000Hz xx SERVICE 102..107 FREQUENCY 1500Hz 108..113 FREQUENCY 3000Hz 114..119 FREQUENCY 5000Hz 120..125 FREQUENCY 10000Hz 126..131 FREQUENCY 15000Hz 132..137 FREQUENCY 20000Hz 138..143 LED BOOST ON 144.149 LED BOOST OFF 150..155 FAN MODE AUTO 156..161 FAN MODE STANDARD 162..167 FAN MODE SILENT 168..173 DISPLAY STANDARD 174..179 DISPLAY ROTATED 180..185 DISPLAY OFF 186..191 DISPLAY ON 192..197 NO FUNCTION 198..203 DEFAULT SET 204..255 FREE - INACTIVE Service - Modalità di salvataggio di una impostazione 1. Selezionare l'impostazione che si desidera effettuare tramite il canale SERVICE 2. Portare il canale STROBE nella fascia SERVICE - il faro si accende a FULL WHITE 3. Rimanere in attesa per 5 secondi 4. Tre lampeggi confermano che l'operazione è stata portata a termine. RDM Il presente dispositivo supporta il protocollo RDM, ultima versione (ANSI E1.20 - 2010). Vengono supportati i seguenti parametri: Denominazione Plasa/ESTA Numero Canali DEVICE_INFO Lettura dei seguenti parametri: - Versione protocollo RDM - Device Model ID - Categoria prodotto - ID versione sw - Numero di canali DMX - Indice modalità DMX - Indirizzo DMX - Numero di sub-devices - Numero di sensori IDENTIFY_DEVICE Accensione dei LED per consentire di individuare visivamente il dispositivo DMX_START_ADDRESS Impostazione/lettura Indirizzo DMX SOFTWARE_VERSION_LABEL Descrizione testuale versione sw SUPPORTED_PARAMETERS Elenco dei parametri supportati DMX_PERSONALITY Impostazione modalità DMX DMX_PERSONALITY_ DESCRIPTION Ottenimento descrizione testuale modalità DMX DEVICE_MODEL_DESCRIPTION Descrizione testuale del device model MANUFACTURER_LABEL Descrizione testuale manufacturer SENSOR_DEFINITION, SENSOR_VALUE Visualizzazione dei valori letti dal sensore di temperatura, espresso in decimi di grado Celsius 8 PR HY LED 300 White 9 PR HY LED 300 White DESCRIPTION OF THE LUMINAIRE Referring to figures on pages 2-3: Suspension yoke Handle for tilt regulation Accessory guides Accessory locking and releasing guide Handles for lens adjustment: focus and zoom Levers for framing shutters adjustment Display and menu buttons DMX THRU connector DMX IN connector Fuse Power OUT (Powercon connector) Power IN (Powercon connector) Light intensity adjustment knob (in Local Potentiometer mode) Screw for front housing removal Front housing rotation stop knob Front housing access door screw for lenses cleaning Gobo slot sliding cover INTRODUCTION The luminaire you have bought complies to 2006/95/EC, 2004/108/EC and 2011/65/EU European Directives. The label on the side of the luminaire lists the following information: · Model · Mains supply voltage (V) · Lamp wattage (W) · Protection index (IP) · maximum allowed ambient temperature in °C INSTALLATION · The luminaire has been designed for professional use only · Do not direct the light beam straight into somebody's eyes · Read carefully the information label on the side of the luminaire · Remember to connect the safety cable, if required by local health and safety regulations · The luminaire can be either suspended or mounted on a stand. WARNING: THE LUMINAIRE MUST ALWAYS BE EARTHED ELECTRICAL CONNECTIONS The luminaire has been designed to operate with a 100V to 240V supply, 50-60Hz. Before and during the installation, make sure you follow the guidelines below: · Always check the earth continuity connection for the line being used. · Ensure the required voltage of the unit is the same as the supplied one. · The unit is designed for indoor use: if it is to be used outdoor, ensure it is protected from dampness and rain. (IP 20) WARNING: THIS UNIT MUST NOT BE CONNECTED TO A DIMMER FOCUSING Using the handle on the side it is possible to loosen the luminaire when it is locked in a certain position and thus change its inclination. You can rotate the luminaire on the vertical axis by rotating it on its hook clamp. The zoom is adjusted with the handles by widening or narrowing the light beam and focusing. Through the four framing shutters it is possible to profile the light beam to obtain special shapes. By loosening the knob you can rotate the front housing, taking care to re-lock it in the new position. By loosening the knob and the screw and rotating the front housing it ill possible to remove it. To clean the lenses, loosen the screw and slide the access door to the front housing, taking care to put the door back in place and re-fix it. MAINTENANCE Do not open the fixture. Maintenance should be performed only by the manufacturer or by its service agent. The luminaire must be serviced at least once a year, to check the integrity of its electrical and mechanical parts and to keep software updated. RECYCLING The product must be recycled or disposed of, according to Directive 2002/96/CE. 10 OPERATING MODE The luminaire is designed to be used in different operating modes: · LOCAL POTENTIOMETER · DMX (Wireless optional) · RDM LIGHT OUTPUT CONTROL DEPENDING ON THE TEMPERATURE The fixture is equipped with a temperature control of the LED and of the driver motherboard, which, to avoid an early deterioration in case of overtemperature, regulates the light intensity. INPUTS PRIORITIES Input priority is given: - in absence of the DMX signal, the value set with the potentiometer will be active - when there is the DMX signal the relevant signal is followed and the potentiometer will be ignored - if the DMX signal is eliminated or lost, the DMX set level is kept until you act on the potentiometer, which will set the new value. MENU When switched on, the installed software version is displayed, followed by the display of the default settings, ie the currently set operating mode. If the luminaire is DMX controlled, after 3 seconds the display will show the mode and DMX address LEGENDA SETUP BACK PREV NEXT ENTER PR HY LED 300 White Pressing the SETUP key you access the settings and browse through the submenus by pressing the NEXT and PREV buttons, which in case of value type entries will have the function of increasing (+) or decreasing (-) the values; the changes can be confirmed with the ENTER button or canceled with the BACK button. SETTINGS DMX SETTINGS OPTIONS INFO MENU STRUCTURE - MAIN MENU Item Value DMX SETTINGS OPTIONS INFO Def Description Dmx settings submenu Optional settings submenu Information submenu 8 bit - 3CH 001 SETUP Otherwise it will show the potentiometers status: MANUAL Dimmer 18% SETUP MENU DMX SETTING Item Value Def Description DMX ADDRESS 1 .. xxx il massimo dipende dalla personality 1 Dmx address DMX PERSONALITY 8 bit - 3CH 16 bit - 6CH 8 bit - 1CH 8 bit - 3CH Dmx mode WIRELESS DMX Optional Wireless dmx setting submenu 11 PR HY LED 300 White MENU DMX SETTING - WIRELESS DMX Item Value Def Description ACTIVATION ON / OFF OFF Switch ON/OFF the wireless DMX module UNLINK Enter to Unlink Esc to Exit To unlink the fixture from the wireless dmx transmitter MENU OPTIONS Item Value Def Description LED DELAY OFF / 30, 60...600 ms 240 ms Delay time on LED output. This parameter is ignored when you select a personality containing the "Delay" channel DIMMING CURVE LINEAR QUADRATIC QUADRATIC Gamma Correction HALO 500, OUT FREQUENCY 800,1000,1500... 10000,11000, 12000... 20000 Hz 1000 Hz PWM LED frequency FAN MODE AUTO (*) STANDARD SILENT Selects the fans operation mode. AUTO For some dmx modes this value is ignored. See the relevant paragraph DISPLAY ROTAT. STANDARD ROTATED 180° rotation of the STANDARD display. Standard = keys to the right of the display. DISPLAY OFF STANDBY ON By selecting ON the OFF display turns off automatically after 60 seconds of inactivity DEFAULT SET It sets the default for all the user parameters FACTORY SETTING Riservato al Costruttore Factory default setting (*) Fan Mode There are three fan control modes. The user can choose the mode via the OPTIONS MENU. 1) AUTO mode: the fans are automatically adjusted based on the LED temperature. 2) STANDARD mode: the fans are always kept at the default value. 3) SILENT mode: the fans are always kept at the minimum value. MENU INFO Item LED TEMPERAT. LED TIME UNIT TIME SOFTWARE VERSION Value 25°C Xx Hr xx min Xx Hr xx min V. .... Release date Description LED temperature LED operation time Unit operation time It displays the software version LOCAL POTENTIOMETER MODE In this mode you can adjust the light intensity using the potentiometer "DIMMER". 12 DMX MODE The DMX mode can be selected from the DMX SETTINGS menu. The DMX mode list with the description of the channels will follow. Ch Name 1 DIMMER 2 STROBE 8 bit - 3CH DMX Value 0..255 From Off (0) to Full (255) 0 INACTIVE 1..255 From slow (3,86 s) to fast (30 ms) 16 bit - 5CH Ch Name DMX Value 1 DIMMER 0..255 From Off (0) to Full (255) 2 DIMMER FINE 0..255 From Off (0) to Full (255) 0..12 0 ms 13..24 30 ms 25..36 60 ms 37..48 90 ms 49..60 120 ms 61..72 150 ms 73..84 180 ms 85..96 210 ms 97..108 240 ms 109..120 270 ms 3 DELAY 121..132 300 ms 133..144 330 ms 145..156 360 ms 157..168 390 ms 169..180 420 ms 181..192 450 ms 193..204 480 ms 205..216 510 ms 217..228 540 ms 229..240 570 ms 241..255 600 ms 4 FAN Fan from MINIMUM to STANDARD speed (values in Volts can be set in the Factory Setting menu) 5 STROBE - See the relevant paragraph - 6 SERVICE - See the relevant paragraph - PR HY LED 300 White Ch Name 1 DIMMER 8 bit - 1CH DMX Value 0..255 From Off (0) to Full (255) STROBE CHANNEL valid in all the DMX modes where it is foreseen Ch Name DMX Value 0 INACTIVE STROBO 1..200 Strobo from slow (3,86 s.) to fast (30 ms) 201..225 OFF xx STROBE Fixture ON at the set colour 226..230 Enabling SERVICE 1 control (set of a custom preset, and keep on hold for 5 secs.) 231..255 OFF 13 PR HY LED 300 White CANALE SERVICE valid if dmx channel STROBE is on SERVICE area Ch Name DMX value 0..5 INACTIVE 6..11 LED DELAY OFF 12..17 LED DELAY 30ms 18..23 LED DELAY 60ms 24..29 LED DELAY 120ms 30..35 LED DELAY 180ms 36..41 LED DELAY 240ms 42..47 LED DELAY 300ms 48..53 LED DELAY 360ms 54..59 LED DELAY 420ms 60..65 LED DELAY 480ms 66..71 LED DELAY 600ms 72..77 CURVE LINEAR 78..83 CURVE QUADRATIC 84..89 FREQUENCY 500Hz 90..95 FREQUENCY 800Hz 96..101 FREQUENCY 1000Hz xx SERVICE 102..107 FREQUENCY 1500Hz 108..113 FREQUENCY 3000Hz 114..119 FREQUENCY 5000Hz 120..125 FREQUENCY 10000Hz 126..131 FREQUENCY 15000Hz 132..137 FREQUENCY 20000Hz 138..143 LED BOOST ON 144.149 LED BOOST OFF 150..155 FAN MODE AUTO 156..161 FAN MODE STANDARD 162..167 FAN MODE SILENT 168..173 DISPLAY STANDARD 174..179 DISPLAY ROTATED 180..185 DISPLAY OFF 186..191 DISPLAY ON 192..197 NO FUNCTION 198..203 DEFAULT SET 204..255 FREE - INACTIVE Service - Saving mode of a setup 1. Select the setup you wish to perform through the SERVICE channel 2. Move the ADVANCED STROBO channel to the SERVICE area - the luminaire switches on at FULL WHITE 3. Keep on hold for 5 secs. 4. Three flashes confirm that the operation was completed RDM This fixture supports the RDM protocol, latest version (ANSI E1.20 - 2010). The following parameters are supported: Plasa/ESTA Denomination Number of Channels DEVICE_INFO Reading of the following parameters: - RDM protocol version - Device Model ID - Product category - ID version sw - Number of DMX channels - DMX mode index - DMX address - Number of sub-devices - Number of sensors IDENTIFY_DEVICE LEDs power on to allow to visually identify the fixture DMX_START_ADDRESS DMX address setting/reading SOFTWARE_VERSION_LABEL Text description version sw SUPPORTED_PARAMETERS List of supported parameters DMX_PERSONALITY DMX mode setting DMX_PERSONALITY_ DESCRIPTION Obtaining textual description of DMX mode DEVICE_MODEL_DESCRIPTION Text description of the device model MANUFACTURER_LABEL Text description manufacturer SENSOR_DEFINITION, SENSOR_VALUE Display of the values read by the temperature sensor, expressed in tenths of Celsius degree 14 PR HY LED 300 White 15 PR HY LED 300 White Spotlight s.r.l. Via Sardegna 3 20098 S. Giuliano Milanese Milano - Italy Tel. +39.02.98830.1 Fax +39.02.98830.22 E-mail: info@spotlight.it www.spotlight.itAdobe PDF Library 10.0.1 Adobe InDesign CS6 (Macintosh)