K-302 Wireless Queue Calling System

Introduction

This manual provides essential instructions for connecting the K-302 display and button transmitters, as well as adjusting prompt voices and other settings. The system is designed for straightforward operation and can be expanded with additional functionalities detailed in other manuals.

Getting Started

The K-302 system is ready to use upon connecting the display's power adapter. Pressing the “NEXT” button on a transmitter initiates a call, displaying “001” on the screen. Upon restarting, the system defaults to “002”.

Customizable voice prompts allow for setting specific locations like “room” or “office” via F8-E2. For a simple “ding dong” sound, use F6-E1-4. Volume can be adjusted using the UP/DOWN keys when the display is in standby mode.

Key Features & Functions

• F1 Storage Mode: Register transmitters and counter numbers.
• F6 Voice Setting: Customize voice prompts and alert sounds.
• F8 Key Settings: Configure voice pairing for specific sounds.
• F9 Restore Factory Settings: Reset the system to default configurations.
• FP Set the Starting Number: Define the initial calling number.
• FU Power-off Memory Function: Retain settings after power cycles.

Troubleshooting & Support

For any setup issues or further assistance, please contact KOQI ELECTRONICE CO., LTD via email at suojiang2021@outlook.com or through Mobile/Whatsapp at +8613305952933.