Galaxy Z Fold4 SCG16 Quick Start Guide

List of Packaged Items

• Main unit
• SIM card removal tool (sample) ?
• USB cable (CtoC) (sample)
• Quick Start Guide (Japanese)
• Notes on Usage (Japanese)
• Sample for data transfer Manual (Japanese)

Important Notes

Please use specified charging equipment (sold separately).

The battery is built into the product.

Illustrations used in this manual are for explanation purposes only and may differ from the actual product.

Warning: Do not fold the product in the reverse direction, as this may cause damage.

Warning: When folding the product, do not insert foreign objects such as cards, coins, or keys into the main display area, as this may damage the display.

Warning: Do not remove the protective film attached to the main display. Removing it may result in a paid repair if re-applied. Do not attach other films or stickers, as they may damage the screen.

Warning: The product is not dustproof. Prevent sand or other fine particles from entering the product.

For the latest information, please refer to the "Full Instruction Manual" (Japanese), available on the contracted carrier's website.

For the latest product information, visit: https://www.galaxymobile.jp/ (Japanese).

Contents may differ due to software upgrades or service changes. This manual is subject to change without notice.

Reproduction of this manual's content, in whole or in part, is prohibited.

Every effort has been made to prepare this manual. If you find any unclear points or omissions, please contact us.

Attaching the SIM Card

Step 1: Insert the SIM card removal tool (sample) ? into the small hole [Small Hole] to eject the SIM card tray. Pull out the SIM card tray.

Step 2: Place the SIM card onto the tray, ensuring the IC (metal) part is facing correctly. Insert the tray back into the slot.

Diagram Description: The diagram shows a SIM card with an IC metal part, a SIM card removal tool, and the phone's SIM tray slot labeled with a notch.

Turning the Power On

1. Press and hold the Side key/Fingerprint recognition sensor for over 2 seconds. [▶️ Press and Hold Button]
2. Swipe the screen up and down, left and right to unlock the screen. [? Swipe to Unlock]

Memo: If the power cannot be turned off or the screen freezes, press and hold the Side key/Fingerprint recognition sensor and the lower side of the Volume key simultaneously for over 7 seconds to force restart.

Names of Parts

Opened View

Top side

• Vent hole*¹
• Speaker (upper)*¹
• Mouthpiece/Microphone (upper)*¹

Front side

• Magnet part*²*³
• Main display (touch panel)*⁴*⁵*⁶*⁷
• Light sensor*⁸
• Front camera*⁷
• Magnetic sensor*⁸

Bottom side

• Speaker (lower)*¹
• Mouthpiece/Microphone (lower)*¹
• USB Type-C® connection terminal (external connection terminal)
• Tray eject hole
• SIM card tray
• Volume key
• Side key/Fingerprint recognition sensor
• Proximity/Light sensor*⁸

Left side

• Cover display (touch panel)*⁷

Closed View

Rear side

• Receiver*¹
• Cover camera*⁷
• Flash/Light
• Wireless charging position
• Hall sensor*⁸
• Microphone (rear)*¹
• Rear camera*⁷
• mark

Important Notes on Parts

*¹ Be careful not to cover sensors with your fingers. Related functions may not work properly. Do not insert the SIM card removal tool into the product, as this might cause damage.

*² The product contains magnets that may affect medical devices like pacemakers or implantable cardioverter defibrillators. Keep the product more than 15cm away from such devices when carrying or using it. Be especially careful not to put it in your jacket pocket. If you suspect interference with your medical device, stop using the product and consult your physician or medical device manufacturer.

*³ Keep this product away from objects that may be affected by magnetism. Objects like credit cards, passbooks, access cards, boarding passes, or parking passes may be damaged or disabled by the magnets in the product.

*⁴ A protective film is already attached.

*⁵ There is a crease in the center, which is a normal condition for this product.

*⁶ Do not attach any sticky material, such as film or stickers, to the main display.

*⁷ Do not push or forcefully press this product with objects like a pen or your fingernail, as this could result in scratching or puncturing.

*⁸ Do not cover the product with stickers or other materials, as functions may not work correctly.

Memo: The antenna is built into the main unit. For antenna position details, please refer to the "Full Instruction Manual" (Japanese).