OSRAM DOWNLIGHT SET SLIM
Product Overview
The OSRAM DOWNLIGHT SET SLIM is a series of recessed LED luminaires designed for efficient and modern lighting solutions. These downlights offer a sleek, slim profile suitable for various ceiling installations.
Available Models:
- DL SET SLIM97 METAL 830D IP44WT
- DL SET SLIM120 METAL 830D IP44WT
- DL SET SLIM160 METAL 830D IP44WT
Technical Specifications
| Model | EAN | W | Im light source | Im output | K | (°C) | V~ | mA | Hz | DF | PF | (☉) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DL SET SLIM97 METAL 830D IP44WT | 4058075854314 | 4.5 | 380 | 240 | 3000 | -20...+40 | 220-240 | 34 | 50/60 | >0.5 | >0.5 | 120 |
| DL SET SLIM120 METAL 830DIP44WT | 4058075854338 | 8 | 800 | 550 | 3000 | -20...+40 | 220-240 | 64 | 50/60 | >0.7 | >0.5 | 120 |
| DL SET SLIM160 METAL 830DIP44WT | 4058075854352 | 18 | 1800 | 1400 | 3000 | -20...+40 | 220-240 | 140 | 50/60 | >0.7 | >0.5 | 120 |
Dimensions and Cutout Sizes
| Model | H (mm) | Ø (mm) |
|---|---|---|
| DL SET SLIM97 | 31 | 97 |
| DL SET SLIM120 | 35 | 116 |
| DL SET SLIM160 | 35 | 160 |
The downlight requires a specific ceiling cutout diameter depending on the model:
- DL SET SLIM97: Ø75mm
- DL SET SLIM120: Ø95mm
- DL SET SLIM160: Ø135mm
Illustration shows a hand operating a light switch, indicating ON (up arrow) and OFF (down arrow) positions.
Illustration shows a circular cutout in a ceiling, with the downlight being inserted. Specific cutout diameters are indicated for different models.
Installation Guide
Important: Check wall/ceiling for suitability. If uncertain, seek professional advice.
- Prepare Switch: Ensure the power supply is switched off. Operate the light switch to the OFF position.
- Cut Ceiling Opening: Create a circular opening in the ceiling with the diameter appropriate for the selected model (see Dimensions section).
- Connect Driver: Connect the AC power supply (220-240V) to the separate driver unit. Ensure correct wiring for Line (L), Neutral (N), and Earth (ground symbol). The wire stripping length should be 14mm for the line/neutral and 7mm for the earth connection. The cable entry depth into the driver should be 10-20mm.
- Connect Downlight to Driver: Connect the driver output to the downlight fixture.
- Mount Fixture: Insert the downlight into the prepared ceiling cutout. The fixture requires a minimum ceiling cutout depth of >50mm, and the fixture itself has a depth of ≥30mm. Ensure it sits flush with the ceiling.
- Power On: Restore power to the circuit and operate the light switch to the ON position.
- Operation: The downlight is now installed and emitting light.
Illustration shows the basic electrical connection: AC power to driver, driver to downlight.
Detailed view of AC connection to the driver, showing L, N, Earth terminals, wire stripping lengths (14mm, 7mm), and cable entry depth (10-20mm). Also indicates required ceiling cutout depth (>50mm) and fixture depth (≥30mm).
Illustration shows the downlight being fitted flush into the ceiling.
Illustration shows the downlight installed and emitting light downwards.
Energy Efficiency and Compliance
This product contains a light source of energy efficiency class F.
Recycling Information:
Dispose of this product and its accessories responsibly. Look for local collection points for paper ([recycle-paper]) and plastic ([recycle-plastic]) waste. Check local regulations for proper disposal.
Protection Ratings:
- IP20: Protection against solid objects larger than 12.5mm, no protection against water.
- IP44: Protection against solid objects larger than 1mm and splashing water from any direction.
Certifications: CE
