SRX Series Services Gateway Transceiver Reference

Juniper Networks

SRX Series Services Gateway Transceiver Reference

Table 1 on page 3 describes the SFP transceivers applicable to SRX Series Services. Gateway SFP interfaces. Table 1: SFP Gigabit Ethernet Transceivers.

PDF preview unavailable. Download the PDF instead.

juniper-srx-modules-datasheet
SRX Series Services Gateway Transceiver Reference

April 2016 Contents

SRX Series Services Gateway Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SRX Series Services Gateway Transceiver Interfaces . . . . . . . . . . . . . . . . . . . . . . . . 9 Installing Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Copyright © 2016, Juniper Networks, Inc.

1

SRX Series Services Gateway Transceiver Reference

SRX Series Services Gateway Transceivers
You can install transceivers of the following types in sockets in various cards or modules in SRX Series Services Gateways: · Small form-factor pluggable (SFP) · Enhanced small form-factor pluggable (SFP+) · 10-Gigabit SFP (XFP) · 100-Gbps form-factor pluggable (CFP) · Quad 40-Gbps form-factor pluggable plus (QSFP+) This guide describes all of the transceivers applicable to the SRX Series Services Gateways. The transceiver types are not interchangeable, with one exception: SFP+ transceivers can be used in SFP interfaces. However, an SFP+ transceiver installed in an SFP interface will be limited to the 1 Gbps maximum data rate of the interface in which it is installed.
NOTE: Modular Interface Cards (MICs) with SFP interfaces do not support SFP+ transceivers.
WARNING: Do not look directly into a fiber-optic transceiver or into the ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable connected to a transceiver emit laser light that can damage your eyes.
WARNING: Do not leave a fiber-optic transceiver uncovered except when inserting or removing cable. The safety cap keeps the port clean and prevents accidental exposure to laser light.
CAUTION: Avoid bending fiber-optic cable tighter than its minimum bend radius. An arc smaller than a few inches in diameter can damage the cable and cause problems that are difficult to diagnose.
CAUTION: If you are having a problem running a Juniper Networks device that is using a third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC) can help you diagnose the source of the problem. Your JTAC engineer might recommend that you check the third-party optic or cable and potentially replace it with an equivalent Juniper Networks optic or cable that is qualified for the device.

2

Copyright © 2016, Juniper Networks, Inc.

SRX Series Services Gateway Transceivers

Table 1 on page 3 describes the SFP transceivers applicable to SRX Series Services Gateway SFP interfaces.

Table 1: SFP Gigabit Ethernet Transceivers

Juniper Networks Model

Description

Ethernet Standard

Wavelength  (nm)
TX RX Media

Connector

Core and Cladding Size

Max. Distance

SRX-SFP-FE-FX

SFP 100BASE-FX Fast Ethernet optic module

100BASE-FX

1300

MMF

LC

62.5/125 2 km

µm

50/125 µm

2 km

SRX-SFP-1GE-LH

SFP 1000BASE-LH Gigabit Ethernet optic module

1000BASE-ZX

1550

SMF

LC

9/125 µm 70 km

SRX-SFP-1GE-LH-ET

SFP 1000BASE-LH Gigabit Ethernet optic module, extended temperature range (see note below)

1000BASE-ZX

1550

SMF

LC

9/125 µm 70 km

SRX-SFP-1GE-LX

SFP 1000BASE-LH Gigabit Ethernet optic module

1000BASE-LX

1310

SMF MMF

LC

9/125 µm 10 km

LC

50/125

550 m

µm

62.5/125 µm

550 m

SRX-SFP-1GE-LX-ET

SFP 1000BASE-LH Gigabit Ethernet optic module, extended temperature range (see note below)

1000BASE-LX

1310

SMF MMF

LC

9/125 µm 10 km

LC

50/125

550 m

µm

62.5/125 µm

550 m

SRX-SFP-1GE-SX

SFP 1000BASE-SX Gigabit Ethernet optic module

1000BASE-SX

850

MMF

LC

50/125

550 m

µm

62.5/125 µm

275 m

Copyright © 2016, Juniper Networks, Inc.

3

SRX Series Services Gateway Transceiver Reference

Table 1: SFP Gigabit Ethernet Transceivers (continued)

Juniper Networks Model

Description

Ethernet Standard

Wavelength  (nm)
TX RX Media

Connector

Core and Cladding Size

Max. Distance

SRX-SFP-1GE-SX-ET

SFP 1000BASE-SX Gigabit Ethernet optic module, extended temperature range (see note below)

1000BASE-SX

850

MMF

LC

50/125

550 m

µm

62.5/125 µm

275 m

SRX-SFP-1GE-T

SFP 1000BASE-T Gigabit Ethernet module (uses Cat 5 cable)

1000BASE-T

Copper

RJ-45

4 twisted pair, category 5 shielded

100 m

SRX-SFP-1GE-T-ET

1000BASE-T Gigabit Ethernet module (uses Cat 5 cable), extended temperture range

1000BASE-T

Copper

RJ-45

4 twisted pair, category 5 shielded

100 m

SFP-FE20KT13R15 EX-SFP-FE20KT13R15

100BASE-BX Fast Ethernet optic module

100BASE-BX-U

1310

1550 SMF

LC

(single-strand

fiber)

9/125 µm 20 km

SFP-FE20KT15R13 EX-SFP-FE20KT15R13

100BASE-BX Fast Ethernet optic module

100BASE-BX-D

1550 1310

SMF

LC

(single-strand

fiber)

9/125 µm 20 km

SFP-GE10KT13R14 EX-SFP-GE10KT13R14

1000BASE-BX10 1000BASE-BX-U 1310 optic module

1490 SMF

LC

(single-strand

fiber)

9/125 µm 10 km

SFP-GE10KT13R15 EX-SFP-GE10KT13R15

1000BASE-BX10 1000BASE-BX-U 1310 optic module

1550 SMF

LC

(single-strand

fiber)

9/125 µm 10 km

SFP-GE10KT14R13 EX-SFP-GE10KT14R13

1000BASE-BX10 1000BASE-BX-D 1490 1310 optic module

SMF

LC

(single-strand

fiber)

9/125 µm 10 km

SFP-GE10KT15R13 EX-SFP-GE10KT15R13

1000BASE-BX10 1000BASE-BX-D 1550 1310 optic module

SMF

LC

(single-strand

fiber)

9/125 µm 10 km

SFP-GE40KT13R15 EX-SFP-GE40KT13R15

1000BASE-BX optic module

1000BASE-BX-U 1310

1550 SMF

LC

(single-strand

fiber)

9/125 µm 40 km

4

Copyright © 2016, Juniper Networks, Inc.

SRX Series Services Gateway Transceivers

Table 1: SFP Gigabit Ethernet Transceivers (continued)

Juniper Networks Model

Description

Ethernet Standard

Wavelength  (nm)
TX RX Media

Connector

Core and Cladding Size

Max. Distance

SFP-GE40KT15R13 EX-SFP-GE40KT15R13

1000BASE-BX optic module

1000BASE-BX-D 1550 1310

SMF

LC

(single-strand

fiber)

9/125 µm 40 km

NOTE: For SRX3400 and SRX3600 Services Gateways to meet NEBS and ETSI standards, all transceivers installed in the services gateway must be of extended temperature (ET) type.

Table 2 on page 5 describes the SFP+ 10-Gigabit Ethernet transceivers applicable to SRX Series Services Gateway SFP and SFP+ interfaces.

Table 2: SFP+ 10-Gigabit Ethernet Transceivers

Juniper Networks SKU Description

Standard

 (nm) TX RX

Media

Connector

Core and Cladding Size

Max. Distance

SRX-SFP-10GE-ER

SFP+ 10-Gigabit Ethernet optic module. Meets extended temperature range requirements (see note below)

10GBASE-ER

1550

SMF LC

9/125 µm 40 km

SRX-SFP-10GE-LR EX-SFP-10GE-LR

SFP+ 10-Gigabit Ethernet optic module. Meets extended temperature range requirements (see note below)

10GBASE-LR

1310

SMF LC

9/125 µm 10 km

SRX-SFP-10GE-SR EX-SFP-10GE-SR

SFP+ 10-Gigabit Ethernet optic module

10GBASE-SR

850

MMF LC

50/125 µm

300 m (OM3)
400 m (OM4)

62.5/125 µm

33 m

Copyright © 2016, Juniper Networks, Inc.

5

SRX Series Services Gateway Transceiver Reference

Table 2: SFP+ 10-Gigabit Ethernet Transceivers (continued)

Juniper Networks SKU Description

Standard

 (nm) TX RX

Media

Connector

Core and Cladding Size

Max. Distance

SFPP-10GE-LRM

SFP+ 10GBase-LRM 10-Gigabit Ethernet optic module

10GBASE-LRM 1260

MMF LC

50/125 µm

220 m

62.5/125 µm

220 m

SRX-SFPP-10G-SR-ET

SFP+ 10-Gigabit Ethernet optic module

10GBASE-SR

850

MMF LC

50/125 µm

300 m

SRX-SFPP-10G-LR

SFP+ 10-Gigabit Ethernet optic module

10GBASE-LR

1310

SMF LC

9/125 µm 10 km

NOTE: For SRX3400 and SRX3600 Services Gateways to meet NEBS and ETSI standards, all transceivers installed in the services gateway must be of extended temperature (ET) type.

Table 3 on page 6 describes the SFP+ 10-Gigabit Ethernet, Direct Attach Cables (DAC) transceivers applicable to SRX Series Services Gateway SFP+ interfaces.

Table 3: SFP+ 10-Gigabit Ethernet DAC Transceivers

Juniper Networks SKU Description Standard

 (nm) TX RX Media

Connector

Core and Cladding Size

Max. Distance

SRX-SFP-10GE-DAC-1M 10-Gbps

10GBASE-DAC

Direct

SFP+

1m

full-duplex EX-SFPP-10GE-DAC-1M serial

Attached passive 30 AWG Twinax

transmission

copper cable

assembly

SRX-SFP-10GE-DAC-3M 10-Gbps

10GBASE-DAC

Direct

SFP+

3m

EX-SFP-10GE-DAC-3M

full-duplex serial

Attached passive 30 AWG Twinax

transmission

copper cable

assembly

EX-SFP-10GE-DAC-5M 10-Gbps

10GBASE-DAC

Direct

SFP+

5m

full-duplex

Attached passive

serial

24 AWG Twinax

transmission

copper cable

assembly

6

Copyright © 2016, Juniper Networks, Inc.

SRX Series Services Gateway Transceivers

Table 3: SFP+ 10-Gigabit Ethernet DAC Transceivers (continued)
 (nm)

Juniper Networks SKU Description Standard

TX RX Media

Connector

Core and Cladding Size

Max. Distance

EX-SFP-10GE-DAC-7M 10-Gbps

10GBASE-DAC

Direct

SFP+

7m

full-duplex

Attached passive

serial

24 AWG Twinax

transmission

copper cable

assembly

Table 4 on page 7 describes the XFP 10-Gigabit Ethernet transceivers applicable to SRX Series Services Gateway XFP interfaces.

Table 4: XFP 10-Gigabit Ethernet Transceivers

Juniper Networks SKU

Description

Standard

 (nm) TX RX

Media

Connector

Core and Cladding Size

Max. Distance

SRX-XFP-10GE-ER

10-Gigabit Ethernet single-mode optic module

10GBASE-ER

1550

SMF LC

9/125 µm 40 km

SRX-XFP-10GE-ER-ET

10-Gigabit Ethernet single-mode optic module, extended temperature range (see note below)

10GBASE-ER

1550

SMF LC

9/125 µm 40 km

SRX-XFP-10GE-LR

10-Gigabit Ethernet single-mode optic module

10GBASE-LR

1310

SMF LC

9/125 µm 10 km

SRX-XFP-10GE-LR-ET

10-Gigabit Ethernet single-mode optic module, extended temperature range (see note below)

10GBASE-LR

1310

SMF LC

9/125 µm 10 km

SRX-XFP-10GE-SR

10-Gigabit Ethernet short-reach multimode optic module

10GBASE-SR

850

SMF LC

9/125 µm 10 km

SRX-XFP-10GE-SR-ET

10-Gigabit Ethernet short-reach multimode optic module, extended temperature range (see note below)

10GBASE-SR

850

SMF LC

9/125 µm 10 km

Copyright © 2016, Juniper Networks, Inc.

7

SRX Series Services Gateway Transceiver Reference

NOTE: For SRX3400 and SRX3600 Services Gateways to meet NEBS and ETSI standards, all transceivers installed in the services gateway must be of extended temperature (ET) type.

Table 5 on page 8 describes the CFP 100-Gigabit Ethernet transceivers applicable to SRX Series Services Gateway CFP interfaces.

Table 5: CFP 100-Gigabit Ethernet Transceivers

Juniper Networks

SKU

Description

Standard

 (nm)

TX

RX

Media

Max. Connector Distance

SRX-CFP-100G-LR4

100-Gigabit Ethernet single-mode optic module

100GBASE-LR4

1310

SMF

Dual SC 10 km

SRX-CFP-100G-SR10

100-Gigabit Ethernet single-mode optic module

100GBASE-SR10

850

MMF

Ribbon cable, 24 multimode fibers

100 m (OM3)
150 m (OM4)

CFP2-100GBASE-SR10 100-Gigabit Ethernet

100GBASE-SR10

860

860

MMF

24-fiber MPO

100 m

CFP2-100GBASE-LR4 100-Gigabit Ethernet

100GBASE-LR4

1310

1310

SMF

LC

10 km

Table 6 on page 8 describes the QSFP+ 40-Gigabit Ethernet transceivers applicable to SRX Series Services Gateway QSFP+ interfaces.

Table 6: QSFP+ 40-Gigabit Ethernet Transceivers

Juniper Networks SKU

Description

Standard

 (nm)

TX

RX

Media

Max. Connector Distance

SRX-QSFP-40G-SR4

40-Gigabit Ethernet single-mode optic module

40GBASE-SR4

850

MMF

OM3, OM4, 12 fiber MPO connector

100 m (OM3)
150 m (OM4)

SRX-QSFP-40G-LR4

40-Gigabit Ethernet single-mode optic module

40GBASE-LR4

1310

SMF

LC

10 km

JNP-QSFP-40G-LX4

40-Gigabit Ethernet pluggable

40GBASE-LX4

1310

MMF

OM4 duplex MMF

150 m (OM3)

8

Copyright © 2016, Juniper Networks, Inc.

SRX Series Services Gateway Transceiver Interfaces

SRX Series Services Gateway Transceiver Interfaces

Table 7 on page 9, Table 8 on page 9, Table 9 on page 9, and Table 10 on page 10 show the different types of transceiver interfaces available on the various types of SRX Series Services Gateways.

Table 7: SRX210, SRX220, and SRX240 Services Gateway Transceiver Interface Types

Transceiver Type

Card Model

Description

Number of Transceiver Interfaces

SFP

SRX-MP-1SFP

1-Port SFP Mini-PIM (not supported on

1

SRX220)

SFP

SRX-MP-1SFP-GE

1-Port Gigabit Ethernet SFP Mini-PIM

1

Table 8: SRX550 and SRX650 Services Gateway Transceiver Interface Types

Transceiver Type Card Model

Description

Number of Transceiver Interfaces

SFP

SRX-MP-1SFP-GE (SRX550 only) 1-Port Gigabit Ethernet SFP Mini-PIM

1

SRX-GP-8SFP

8-Port Gigabit Ethernet SFP XPIM

8

SFP+

SRX-GP-2XE-SFPP-TX

2-Port 10-Gigabit Ethernet XPIM

2

Table 9: SRX1400, SRX3400, and SRX3600 Services Gateway Transceiver Interface Types

Transceiver Type Card Model

Description

Number of Transceiver Interfaces

SFP

SRX3K-16GE-SFP

IOC

16

SRX1K-SYSIO-GE (SRX1400 only)

SYSIOC

6

SFP+

SRX1K3K-NP-2XGE-SFPP

NP-IOC

2

SRX1K-SYSIO-XGE (SRX1400 only)

SYSIOC

3

XFP

SRX3K-2XGE-XFP

IOC

2

Copyright © 2016, Juniper Networks, Inc.

9

SRX Series Services Gateway Transceiver Reference

Table 10: SRX5400, SRX5600, and SRX5800 Services Gateway Transceiver Interface Types

Transceiver Type Card Model

Description

Number of Transceiver Interfaces

SFP

SRX5K-40GE-SFP

IOC

40

SRX-IOC-16GE-SFP

Flex IOC Port Module

16

SRX5K-SPC-2-10-40

SPC

2

SRX5K-SPC-4-15-320

SPC

2

SRX-MIC-20GE-SFP

MIC

20

SFP+

SRX-MIC-10XG-SFPP

MIC

10

XFP

SRX5K-4XGE-XFP

IOC

4

SRX-IOC-4XGE-XFP

Flex IOC Port Module

4

CFP

SRX-MIC-1X100G-CFP

MIC

1

QSFP+

SRX-MIC-2X40G-QSFP

MIC

2

The following is a list of transceivers supported on the SRX300 Series, SRX550 High Memory, and SRX1500 Services Gateways.

Supported Transceiver

SRX300 Series Services Gateways

SRX550 High Memory Services Gateway

SRX1500 Services Gateway

SRX-SFP-1GE-LH







SRX-SFP-1GE-LX







SRX-SFP-1GE-SX







SRX-SFP-1GE-T







SRX-SFP-FE-FX





EX-SFP-10GE-LR



EX-SFP-10GE-SR



EX-SFP-FE20KT13R15





EX-SFP-FE20KT15R13





10

Copyright © 2016, Juniper Networks, Inc.

SRX Series Services Gateway Transceiver Interfaces

Supported Transceiver EX-SFP-GE10KT13R14 EX-SFP-GE10KT13R15 EX-SFP-GE10KT14R13 EX-SFP-GE10KT15R13 EX-SFP-GE40KT13R15 EX-SFP-GE40KT15R13 EX-SFPP-10GE-DAC-1M EX-SFPP-10GE-DAC-3M

SRX300 Series Services Gateways

SRX550 High Memory Services Gateway

























SRX1500 Services Gateway
 

The following is a list of all the cards and supported transceivers for the SRX1400 Services Gateway.

Copyright © 2016, Juniper Networks, Inc.

11

SRX Series Services Gateway Transceiver Reference
The following is a list of all the cards and supported transceivers for the SRX3400 and SRX3600 Services Gateways.

12

Copyright © 2016, Juniper Networks, Inc.

Installing Transceivers
Following is a list of transceivers supported on all cards, along with the Junos OS release in which they were introduced, for the SRX5000 line of Services Gateways.

Installing Transceivers
Transceivers are hot-insertable and hot-removable. Removing a transceiver does not interrupt the functioning of the card or module.
To install a transceiver:
1. Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Take each transceiver to be installed out of its electrostatic bag, and identify the socket on the card or module where you will install it.
WARNING: Do not leave a fiber-optic transceiver uncovered except when inserting or removing cable. The safety cap keeps the port clean and prevents accidental exposure to laser light.

Copyright © 2016, Juniper Networks, Inc.

13

SRX Series Services Gateway Transceiver Reference
3. For each fiber interface transceiver, verify that the interface port is covered by a rubber safety cap. If it is not, cover the interface port with a safety cap. The safety cap prevents the release of laser light that can damage your eyes.
4. Carefully align the transceiver with the socket in the services gateway card or module. The connector should face the socket.
5. Slide the transceiver into the socket until the connector is seated in the component slot. If you are unable to fully insert the transceiver, make sure the connector is oriented correctly. See the hardware documentation for your services gateway for more information about LEDs.
6. Close the ejector handle of the transceiver. 7. Remove the rubber safety caps from both the transceiver and from the end of the
cable. Insert the cable into the transceiver. 8. Verify that the status LEDs on the component faceplate indicate that the transceiver
is functioning correctly.
Documentation and Release Notes
To obtain the most current version of all Juniper Networks® technical documentation, see the product documentation page on the Juniper Networks website at http://www.juniper.net/techpubs/.
If the information in the latest release notes differs from the information in the documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts. These books go beyond the technical documentation to explore the nuances of network architecture, deployment, and administration. The current list can be viewed at http://www.juniper.net/books.
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance Center (JTAC). If you are a customer with an active J-Care or Partner Support Service support contract, or are covered under warranty, and need postsales technical support, you can access our tools and resources online or open a case with JTAC.
· JTAC policies--For a complete understanding of our JTAC procedures and policies, review the JTAC User Guide located at http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf .
· Product warranties--For product warranty information, visit http://www.juniper.net/support/warranty/ .
· JTAC Hours of Operation --The JTAC centers have resources available 24 hours a day, 7 days a week, 365 days a year.

14

Copyright © 2016, Juniper Networks, Inc.

Requesting Technical Support
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: · Find CSC offerings: http://www.juniper.net/customers/support/ · Find product documentation: http://www.juniper.net/techpubs/ · Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/ · Download the latest versions of software and review release notes:
http://www.juniper.net/customers/csc/software/ · Search technical bulletins for relevant hardware and software notifications:
https://www.juniper.net/alerts/ · Join and participate in the Juniper Networks Community Forum:
http://www.juniper.net/company/communities/ · Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/ To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone. · Use the Case Management tool in the CSC at http://www.juniper.net/cm/ . · Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico). For international or direct-dial options in countries without toll-free numbers, visit us at http://www.juniper.net/support/requesting-support.html
Revision History
June 2015-- Added information about DAC and CFP2 optics. August 2015-- Updated core and cladding size for SRX-SFP-FE-FX. October 2015--Added information about DAC optics. November 2015--Added OM4 detail for SRX-SFP-10GE-SR. April 2016--Added transceiver support information for the SRX300 Series, SRX550 High Memory, and SRX1500 Services Gateways.

Copyright © 2016, Juniper Networks, Inc.

15

SRX Series Services Gateway Transceiver Reference

Copyright © 2016, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.

16

Copyright © 2016, Juniper Networks, Inc.


XEP 4.22 build 2013