Vermont Castings SEQUOIA EWF36A Owner's Manual

Product Overview

This document serves as the owner's manual for the Vermont Castings SEQUOIA EWF36A EPA Wood Burning Fireplace. It provides essential information for operation, maintenance, and installation.

Shop genuine replacement parts for Vermont Castings SEQUOIA EWF36A at Appliance Factory Parts.

Technical Information

• Glass Viewing Area: 36"W x 20-1/4"H
• Max. Btu Input: Up to 100,000 BTU/HR
• Area Heated: Up to 2,500 sq. ft.
• EPA Emissions Rating (catalytic): 2.4 g/h
• Fuel Capacity: 40 lbs. (18kg)
• Loading: Front
• Fireplace Weight: 741 lbs.
• Primary Air Control: Manual
• Glass Panel: High-temperature ceramic
• Blower Rating: 160 cfm (115V, 60Hz)
• Flue Exit Position: Top
• Certifications: EPA Phase II Certified & Washington State Certified

Field Installed Accessories

Optional Face Kits (one required):

• EWF36CFTK: Cast iron face kit (totally covers face of unit) with grills in Classic Black
• EWF36CLK: Latticed cast iron grills (top and bottom) in Classic Black

Other Accessories:

• Fan Kit: FK26
• Sparkscreen: EWF36S

Diagrams and Dimensions

The fireplace features a detailed exploded view diagram illustrating various components and their placement. Key dimensions are provided for installation planning:

• Rough Opening Width: 43"
• Rough Opening Height: 51 1/2" (1308mm)
• Rough Opening Depth: 27" (686mm)
• Overall Width: 67 1/4" (1708mm)
• Overall Height: 81 1/2" (2070mm)
• Overall Depth: 47 1/2" (1207mm)
• Flue Diameter: 13 1/2" (343mm)
• Nailing Flange: 5/8" Recessed
• Outside Air Connection: 4 1/4" (1092mm)

The diagrams also indicate specific measurements for components such as the hearth, flue collar, and electrical access.

Manufacturer Information

The Vermont Castings SEQUOIA EWF36A is a brand of Monessen Hearth Systems Co.

Address: 149 Cleveland Drive, Paris, Kentucky 40361

Website: www.vermontcastings.com

Certifications: NFI, HPBA, CHPBAC, CULUS LISTED, MADE IN U.S.A.

Important Safety Information

To avoid personal injury or property damage, the product must be installed, operated, and maintained in strict compliance with the instructions packaged with the product and all applicable building or fire codes. Contact local building or fire officials about restrictions and installation inspection requirements.

All photographs and drawings are for illustrative purposes only and should not substitute for the instructions packaged with the unit. Appearance and specifications are subject to change without notice.