Small Space Robot Speaker

Introduction

Thank you for choosing the K-29 Bluetooth speaker. Please read this user manual carefully before use to ensure correct operation and to fully utilize the product's superior performance.

Product Overview

The Small Space Robot Speaker (Model: K-29) is a portable Bluetooth speaker designed with a unique robot aesthetic.

Visual Description:

The speaker is shaped like a robot. The front view shows the main speaker grille (② Megaphone) and a central control button (① Key switch). Below the speaker grille, there is a Type-C charging port (③ Type-C interface).

The back view primarily features the speaker grille.

Product Features

• Supports Bluetooth music playback.
• Supports Bluetooth auto-reconnection.
• Supports hands-free calling.
• Supports TWS (True Wireless Stereo) pairing for two speakers.

Product Parameters

Operation Instructions

Key Instructions (Basic & Color Versions):

• Power On/Off: Long press the button for 5 seconds.
• Play/Pause: Single click the button.
• TWS Pairing: Long press the button for 1-2 seconds to connect two machines.

Light Modes (Color Version):

When powered on, the light will automatically flash through 4 modes. After Bluetooth connection, the lights will flash according to the music's volume.

• Double click the button to switch light modes:
  • Mode 1: Running from left to right.
  • Mode 2: From the center to the left and right sides.
  • Mode 3: Running from right to left.
  • Mode 4: Running from left and right towards the center.

Charging Instructions:

Use the included TYPE-C charging cable with an external 5V/1A charger. The red indicator light near the MIC hole will illuminate during charging. A solid blue light indicates a full charge.

Note: Charging takes approximately 3 hours when the device is off and about 6 hours when it is on.

The unit has a built-in rechargeable lithium-ion battery; please charge it before first use.

Pairing Operation:

Long press the power button. The Bluetooth pairing name is "K-29".

Long press the button for 1-2 seconds to connect two machines (TWS).

If the product is not connected to a Bluetooth device for 6 minutes, it will automatically shut down.

Reset Function:

If the machine cannot be connected or shut down properly, long press the button for 10 seconds to reset and restart the function.

Attention and Precautions

Bluetooth Use Environment:

Wireless signal transmission, including Bluetooth, is significantly affected by the surrounding environment. Obstacles such as metal, trees, human bodies, and walls can absorb signals, impacting transmission distance.

Charging Precautions:

Do not charge batteries near fire or heat sources. Do not use the product near heaters or in extremely hot environments like direct sunlight or hot cars. Doing so may reduce battery performance or lifespan.

Battery Precautions:

If the battery will not be used for a long time, charge it to over 50% capacity before storing it safely. Store products in an indoor warehouse at 25°C and humidity not exceeding 75% to minimize capacity degradation.

Product Storage Precautions:

Store products in an indoor warehouse at 25°C and humidity not exceeding 75% to minimize capacity degradation.

Transportation Precautions:

Protect products from rain and flooding during transportation. Avoid long-term stacking in high-temperature environments.

Warranty Information

Please keep the warranty card as proof of maintenance. The warranty period is six months from the date of purchase.

During the warranty period, if the product fails under normal use, it will be repaired free of charge if verified by the company.

Conditions Not Covered by Free Repair:

• Equipment or parts are outside the valid warranty period.
• Failure or damage caused by incorrect installation, storage, or use contrary to the manual.
• Failure or damage caused by disassembly by unauthorized personnel or institutions.
• Failure or damage due to accidental factors or human reasons (e.g., operation errors, scratches, drops, incorrect voltage input).
• Failure or damage due to natural disasters or force majeure (e.g., earthquakes, fires).

Battery Waste Instructions:

Before discarding the appliance, remove the battery. Ensure the appliance is powered off before removing the battery. Dispose of the battery safely according to national environmental protection requirements to avoid pollution.

Accessories List

• Speaker × 1
• Data Cable × 1
• User Manual × 1

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Product Warranty Card

Please fill out the following details:

• User Name:
• Purchase Time:
• Contact Information:
• User Address:
• Breakdown: