Zealot S32 Outdoor Wireless Speaker
Document Version: KRZ-WI-RD-S32P003, Version A/0
Date: 2021.03.30
1. Product Overview
The Zealot S32 is an outdoor wireless speaker designed for portable audio playback. It supports multiple connection modes including Bluetooth, TF card, AUX, USB, and FM radio.
2. Power On/Power Off
Long press the power button [⏻] for 3 seconds to turn the device on or off.
3. Product Function Introduction
Mode Switching
The device supports the following playback modes, with the switching sequence:
- Bluetooth
- TF Card
- AUX (Audio Cable)
- USB
- FM Radio
Note: When both TF Card and AUX cable are inserted, the last inserted content will be defaulted to the playback mode.
Bluetooth Mode
- Connection: Long press the power button [⏻] until a warning tone "Bluetooth Mode" is heard. Search for the Bluetooth device "ZEALOT-S32" on your phone and connect. A solid indicator light signifies a successful connection.
- Reconnection: The speaker will attempt to reconnect to the last connected device. If not, restart the speaker or manually reconnect via your phone's Bluetooth settings. For iOS, ensure Bluetooth is enabled before powering on the speaker for automatic connection.
- TWS (True Wireless Stereo) Connection: When two S32 units are powered on and within 10 meters, double-click the power button [⏻] on either unit to connect them. Subsequent connections will be automatic after the first successful pairing.
- Call Handling:
- Single click [⌚] to answer or end a call.
- Long press [⏻] to reject an incoming call.
- Music Playback Controls:
- Single click "-" or "+" to switch to the previous or next track.
- Long press "-" or "+" to adjust the volume down or up.
- Single click [⌚] to play or pause music.
TF Card Mode
Insert a TF card. The device will play music from the TF card after the warning tone "Music Mode" is heard.
AUX Mode
Connect an audio cable (AUX) to the AUX port. The device will switch to "Line in Mode" and play audio from connected devices like phones, MP3 players, or computers.
USB Mode
Insert a USB drive. The device will play music from the USB drive after the warning tone "Music Mode" is heard.
FM Radio Mode
- Double-click the power button [⏻] to switch to "Radio Mode".
- Single click [⌚] to automatically search for channels. The first found station will play upon completion of the search.
- Single click "-" or "+" to switch to the previous or next broadcasting station.
- Long press "-" or "+" to adjust the volume.
- Note: Plugging in the charging cable can improve radio reception.
4. Product Specifications
| Parameter | Specification |
|---|---|
| Input Voltage | 5V |
| Speaker Output | 4Ω 5W |
| Transmission Distance | 10m |
| SNR (Signal-to-Noise Ratio) | ≥85dB |
| Frequency Response | 20Hz-20KHz |
| Distortion | <1% |
| Operating Voltage | 3.7V |
| Weight | 350g |
| Dimensions | 74*74*123mm |
5. Charging
When the battery is low, a "Low Battery Please Charge" tone will be heard. Connect the USB cable to an adapter or a computer's USB port to charge the speaker. The red indicator light will be on during charging and turn off when fully charged.
Note: Charging time may vary depending on the adapter or computer USB port used.
6. Notice
- Do not throw the product into fire or water.
- Do not modify, repair, or disassemble the speaker.
- Keep the device away from combustible materials.
- Keep the device away from damp and dusty environments.
- Ensure the charger model is suitable for this product before charging.
- Do not use the Bluetooth function while charging.
- The device will automatically lose power when in standby; it is recommended to charge the speaker once a month.
- Keep your speaker and mobile phone within the 10m working range.
- Any unauthorized modifications to the speaker may cause damage.
- Improper replacement of batteries can lead to an explosion hazard.
7. NOTE (FCC Compliance)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE FC RoHS CCC
(Made in China)
