Hoshizaki IM-45PE Cuber, Self Contained Ice Maker

Product Overview

The Hoshizaki IM-45PE is a self-contained ice maker designed to produce up to 47 kg of cube ice per 24 hours under specific ambient and water temperatures (10°C ambient, 10°C water). It features a storage bin capacity of 18 kg.

Key Features

• Ice making system with an automatic rinse cycle
• Each ice cycle is made with fresh water
• Closed Cell System helps produce compact, hard, and geometrically perfect ice
• Closed water circuit for contamination protection
• Easy external access to control panel
• UV-C sanitization function is retrofittable
• Internal drain pump is retrofittable
• System includes a magnetic DC water pump with variable speed, featuring no direct coupling to prevent leakage
• Cleanable air filter
• Removable door gasket
• Easily removable water pan assembly

Ice Type Description

Ice Type: Large cubes, Standard

Cube Dimensions: Approximately 28mm x 28mm x 32mm

Cube Weight: Approximately 23 grams

Accessories

Included

• Scoop
• Installation kit
• Legs

Optional Accessories

• 4HC-H water filtration
• Scoop holder kit
• UV-C sanitization kit
• Internal drain pump (Pump motor kit and bracket)

Corresponding Water Filters

• 4HC-H Single Water Filter
• 4HC Replacement Cartridge

Specifications

Warranty

3 Years on Parts & Labour

Exterior

Stainless steel 430, Galvanized steel (Rear)

Refrigerant

Refrigerant: R290 / Refrigerant (kg): 0.07 / CO2 equivalent (kg): 0.21

Operating Conditions

Ambient Temperature: 1°C to 40°C

Water Supply Temperature: 5°C to 35°C

Water Supply Pressure: 0.07 to 0.8 MPa (0.7 to 8 bar)

Voltage Range: Rated Voltage ±6%

Technical Specifications

Shipping Specifications

Certifications

HACCP INTERNATIONAL, NSF, ISO CE, HOSHIZAKI ISO 9001 Certified Product, NSF REG4 S3 CERTIFICATION

Diagram Descriptions

Ice Cube Diagram

The ice cube produced by the IM-45PE is described as a "Large cube, Standard" type. Its dimensions are approximately 28mm in length and width, and 32mm in height. Each cube weighs about 23 grams.

Technical Drawings Description

The technical drawings illustrate the physical dimensions and connection points of the Hoshizaki IM-45PE ice maker. The main unit, excluding legs, measures 503mm in width, 456mm in depth, and 840mm in height. The legs are adjustable and can add between 90mm and 125mm to the unit's height. Key connection points are indicated: a water inlet labeled "G3/4" and a drain outlet labeled "R3/4". A power cord is also shown, extending 2000mm from the unit.

Important Notes

Disclaimer: Hoshizaki Europe BV assumes no responsibility or liability for typographical errors, omissions, or misinterpretations within this specification sheet and reserves the right to change information without notice.

Water Cooled Units Note: If applicable, water-cooled units require the condenser circuit to be connected to a self-contained recirculating system. Connecting such units directly to the mains water supply may contravene local water authority by-laws.

Contact Information

Hoshizaki UK

2 The Technology Centre, London Road, Swanley, Kent BR8 7AG, United Kingdom

Phone: 01322 616 900

Email: uksales@hoshizaki.uk

Website: www.hoshizaki.uk

Other Hoshizaki Branches

Hoshizaki Belgium

Email: info@hoshizaki.nl

Hoshizaki Danmark

Email: info@hoshizaki.dk

Hoshizaki Deutschland

Email: vertrieb@hoshizaki.de

Hoshizaki France

Email: info@hoshizaki.fr

Hoshizaki Iberia

Email: info@hoshizaki.es

Hoshizaki Italia

Email: commerciale@hoshizaki.it

Hoshizaki Middle East

Email: sales.ex@hoshizaki-europe.com

Hoshizaki Netherlands

Email: info@hoshizaki.nl

Hoshizaki Norge

Email: salg@hoshizaki.no

Hoshizaki Sverige

Email: orderSE@hoshizaki.dk

Export Countries

Email: sales.ex@hoshizaki-europe.com

Other Countries

Email: sales.ex@hoshizaki-europe.com