MikroTik RouterBOARD cAP XL ac (RBcAPGi-5acD2nD-XL) od PLN 375,49 (2021) | Porównanie cen Cenowarka.pl Polska
MikroTik RouterBOARD cAP XL ac (RBcAPGi-5acD2nD-XL) | Porównanie cen Cenowarka.pl Polska
cAP XL ac cAP XL ac (RBcAPGi-5acD2nD-XL) Connecting Connect POE to Ethernet port 1, please see the Powering section for instructions on how to connect POE. Set your computer IP configuration to automatic (DHCP). The device wireless access point mode is enabled by default. The device will boot up and a Wireless network will be available for connecting. Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it. Once connected to the wireless network, open https://192.168.88.1 in your web browser to start configuration, user name: admin, since there is no password by default, you will be logged in automatically. We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best performance and stability. Choose your country, apply country regulation settings, and set up your password on the screen that loads. Powering The device accepts power from the Ethernet port, so you must either use the included passive PoE injector or make sure your switch supports passive or 802.3af/at PoE output. Ethernet port accepts 12-57 V DC (802.3af/at). The power consumption under maximum load can reach 24 W. Connecting to a POE Adapter: 1. Connect the Ethernet cable from the device to the POE port of the POE adapter. 2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow. 3. Connect the power cord to the adapter, and then plug the power cord into a power outlet. Mounting It is possible to attach the device to a wall or ceiling, using the provided mounting bracket on the back of the unit: The mounting and configuration of this device should be done by a qualified person. Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. The operation of this equipment in the residential environment could cause radio interference. Operating humidity can be from 5% to 95% non-condensing. Configuration By default, the device is configured as a wireless access point, with the first ethernet port (Eth1) configured as a DHCP client, and the second interface bridged together with the wireless interface. A DHCP server is configured on the bridge interface. Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to conform with local regulations. RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case an IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the Internet port by default). For recovery purposes, it is possible to boot the device from the network, see a section cAP ac#Reset button. Expansion slots and ports Product code RBcAPGi-5acD2nD-XL CPU Quad-core IPQ-4018 710 MHz Size of RAM 128 MB RAM type DDR3L Storage 16 MB, Flash Number of 1G Ethernet ports 2 Wireless 2.4 GHz 5 GHz Supported protocol 802.11b/g/n 802.11a/n/ac Antenna gain 6 dBi 5,5 dBi Number of chains 2 Operating system RouterOS (License level 4) Switch chip model IPQ-4018 Dimensions 191 x 42 mm Operating temperature -40°C to +70°C Buttons and jumpers Reset button The reset button has three functions: Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds). Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15 seconds). Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery. Mode button There are two mode buttons on this unit, but they both are performing the same action. The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS script. You can also disable this button. By default, the buttons will enable "dark mode", which disables beeps and LED lights. The mode button can be configured in the RouterOS menu /system routerboard mode-button. LED indicators There are seven LED lights on the unit, which can be controlled in RouterOS software, or disabled altogether. User user-configurable led for any desired script. 5G 5GHz interface activity. 2G 2.4 GHz interface activity. E2 Ethernet 2 connected. E1 Ethernet 1 connected. PoE LED indicates that the ETH2 port is currently powering another device with PoE. The power LED indicates that the unit is receiving power in the ETH1 port. Accessories The package includes the following accessories that come with the device: ADAPT1_ EU/US Switching Power Supply 24V, 1.2A. POE1_ Gigabit POE injector. BRAC1_ CAPGB-Mounting Bracket. Screw set 2 screws and dowels for mounting. Operating system support The device supports RouterOS software version 6.48.4. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. MikroTik mobile app Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point. 1. Scan QR code and choose your preferred OS. 2. Install and open application. 3. By default, the IP address and user name will be already entered. 4. Click Connect to establish a connection to your device through a wireless network. 5. Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps. 6. An advanced menu is available to fully configure all necessary settings. Notice The Frequency band 5.470-5.725 GHz isn't allowed for commercial use. In case WLAN devices work with different ranges than the above regulations, then a customized firmware version from the manufacturer/supplier is required to be applied to the end-user equipment and also prevent the end-user from reconfiguration. For Outdoor Usage: End-user requires approval/license from the NTRA. Datasheet for any device is available on the official manufacturer website. Products with the letters "EG" at the end of their serial number have their wireless frequency range limited to 2.400 2.4835 GHz, the TX power is limited to 20dBm (EIRP). Products with the letters "EG" at the end of their serial number have their wireless frequency range limited to 5.150 5.250 GHz, the TX power is limited to 23dBm (EIRP). Products with the letters "EG" at the end of their serial number have their wireless frequency range limited to 5.250 5.350 GHz, the TX power is limited to 20dBm (EIRP). Please make sure the device has a locking package (firmware version from the manufacturer) which is required to be applied to the end-user equipment to prevent the end-user from reconfiguration. The product will be marked with country code "-EG". This device needs to be upgraded to the latest version to ensure compliance with local authority regulations! It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed. Federal Communication Commission Interference Statement Model RBcAPGi-5acD2nD-XL-US FCC ID TV7CPGI52XL This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance. Innovation, Science and Economic Development Canada Model RBcAPGi-5acD2nD-XL-US IC 7442A-CPGI52XL This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-003 (B) / NMB-003 (B) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux CE Declaration of Conformity BG Mikrotkls SIA , RBcAPGi-5acD2nD-XL 2014/53/. : https://mikrotik.com/products CS Tímto Mikrotkls SIA prohlasuje, ze typ rádiového zaízení RBcAPGi-5acD2nD-XL je v souladu se smrnicí 2014/53/EU. Úplné znní EU prohlásení o shod je k dispozici na této internetové adrese: https://mikrotik.com/products DA Hermed erklærer Mikrotkls SIA, at radioudstyrstypen RBcAPGi-5acD2nD-XL er i overensstemmelse med direktiv 2014/53/EU. EUoverensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: https://mikrotik.com/products DE Hiermit erklärt Mikrotkls SIA, dass der Funkanlagentyp RBcAPGi-5acD2nD-XL der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EUKonformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://mikrotik.com/products EL / Mikrotkls SIA, RBcAPGi-5acD2nD-XL 2014/53/. : https://mikrotik.com/products EN Hereby, Mikrotkls SIA declares that the radio equipment type RBcAPGi-5acD2nD-XL is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products ES Por la presente, Mikrotkls SIA declara que el tipo de equipo radioeléctrico RBcAPGi-5acD2nD-XL es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: https://mikrotik.com/products ET Käesolevaga deklareerib Mikrotkls SIA, et käesolev raadioseadme tüüp RBcAPGi-5acD2nD-XL vastab direktiivi 2014/53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: https://mikrotik.com/products FI Mikrotkls SIA vakuuttaa, että radiolaitetyyppi RBcAPGi-5acD2nD-XL on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products FR Le soussigné, Mikrotkls SIA, déclare que l'équipement radioélectrique du type RBcAPGi-5acD2nD-XL est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: https://mikrotik.com/products HR Mikrotkls SIA ovime izjavljuje da je radijska oprema tipa RBcAPGi-5acD2nD-XL u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: https://mikrotik.com/products HU Mikrotkls SIA igazolja, hogy a RBcAPGi-5acD2nD-XL típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelségi nyilatkozat teljes szövege elérhet a következ internetes címen: https://mikrotik.com/products IT Il fabbricante, Mikrotkls SIA, dichiara che il tipo di apparecchiatura radio RBcAPGi-5acD2nD-XL è conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: https://mikrotik.com/products IS Hér með lýsir Mikrotkls SIA því yfir að RBcAPGi-5acD2nD-XL er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi: https://mikrotik.com/products LT As, Mikrotkls SIA, patvirtinu, kad radijo rengini tipas RBcAPGi-5acD2nD-XL atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas siuo interneto adresu: https://mikrotik.com/products LV Ar so Mikrotkls SIA deklar, ka radioiekrta RBcAPGi-5acD2nD-XL atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams sd interneta vietn: https://mikrotik.com/products MT B'dan, Mikrotkls SIA, niddikjara li dan it-tip ta' tagmir tar-radju RBcAPGi-5acD2nD-XL huwa konformi mad-Direttiva 2014/53/UE. It-test kollu taddikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ej: https://mikrotik.com/products NL Hierbij verklaar ik, Mikrotkls SIA, dat het type radioapparatuur RBcAPGi-5acD2nD-XL conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: https://mikrotik.com/products NO Mikrotkls SIA erklærer herved at utstyret RBcAPGi-5acD2nD-XL er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014 /53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: https://mikrotik.com/products PL Mikrotkls SIA niniejszym owiadcza, e typ urzdzenia radiowego RBcAPGi-5acD2nD-XL jest zgodny z dyrektyw 2014/53/UE. Pelny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: https://mikrotik.com/products PT O(a) abaixo assinado(a) Mikrotkls SIA declara que o presente tipo de equipamento de rádio RBcAPGi-5acD2nD-XL está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet: https://mikrotik.com/products RO Prin prezenta, Mikrotkls SIA declar c tipul de echipamente radio RBcAPGi-5acD2nD-XL este în conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: https://mikrotik.com/products SK Mikrotkls SIA týmto vyhlasuje, ze rádiové zariadenie typu RBcAPGi-5acD2nD-XL je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: https://mikrotik.com/products SL Mikrotkls SIA potrjuje, da je tip radijske opreme RBcAPGi-5acD2nD-XL skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: https://mikrotik.com/products SV Härmed försäkrar Mikrotkls SIA att denna typ av radioutrustning RBcAPGi-5acD2nD-XL överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: https://mikrotik.com/products WLAN Operating Frequency / Maximum output power WLAN 2400-2483.5 MHz / 20 dBm Betriebsfrequenz / maximale Ausgangsleistung WLAN 5150-5250 MHz / 23 dBm Fréquence de fonctionnement / puissance de sortie maximale WLAN 5250-5350 MHz / 20 dBm Frequenza operativa / massima potenza di uscita WLAN 5470-5725 MHz / 27 dBm Frecuencia de funcionamiento / potencia de salida máxima / This MikroTik device meets Maximum WLAN and LTE transmit power limits per ETSI regulations. For more detailed information see Declaration of Conformity above / Dieses MikroTik-Gerät erfüllt die maximalen WLAN- und LTE-Sendeleistung Grenzwerte gemäß ETSI-Bestimmungen. Weitere Informationen finden Sie oben unter Konformitätserklärung / Cet appareil MikroTik respecte les limites maximales de puissance de transmission WLAN et LTE conformément aux réglementations ETSI. Pour plus d'informations, voir la déclaration de conformité ci-dessus / Questo dispositivo MikroTik è conforme ai limiti massimi di potenza di trasmissione WLAN e LTE in conformità con le normative ETSI. Per ulteriori informazioni, consultare la dichiarazione di conformità sopra / Este dispositivo MikroTik cumple con los límites máximos de potencia de transmisión WLAN y LTE de acuerdo con las regulaciones ETSI. Para obtener más información, consulte la declaración de conformidad anterior / MikroTik WLAN LTE ETSI. . . The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. / Die WLAN-Funktion dieses Geräts ist nur für die Verwendung in Innenräumen im Frequenzbereich 5150 bis 5350 MHz beschränkt. / La fonction WLAN de cet appareil est limitée à une utilisation en intérieur uniquement lorsqu'il fonctionne dans la gamme de fréquences 5150 à 5350 MHz. / La funzione WLAN per questo dispositivo è limitata all'uso interno solo quando si opera nella gamma di frequenza da 5150 a 5350 MHz. / La función WLAN para este dispositivo está restringida al uso en interiores solo cuando se opera en el rango de frecuencia de 5150 a 5350 MHz. / WLAN 5150 5350 . (EN) Technical Specifications / (DE) Technische Spezifikationen / (FR) Spécifications techniques / (IT) Specifiche tecniche / (ES) Especificaciones técnicas / (RU) : (EN) Product Power Input Options (DE) Produkt Stromquellen Optionen (FR) Options d'entrée d'alimentation du produit (IT) Opzioni di ingresso alimentazione del prodotto (ES) Opciones de entrada de energía del producto (RU) (EN) DC Adapter Output Specification, (V/A) (DE) Ausgangsspezifikationen des Gleichstromadapters, (V/A) (FR) Spécifications de sortie de l'adaptateur de courant continu, (V/A) (IT) Specifiche di uscita dell'adattatore di corrente continua, (V/A) (ES) Especificaciones de salida del adaptador de corriente continua, (V/A) (RU) , (/) (EN) IP class of the enclosure (DE) IP-Klasse des Gehäuses (FR) Classe IP du boîtier (IT) Classe IP della custodia (ES) Clase de IP del recinto (RU) IP (EN) Operating Temperature (DE)Betriebstemperatur (FR) température de fonctionnement (IT) temperatura di esercizio (ES) Temperatura de funcionamiento (RU) DC Jack 17-57 V 24 / 1.2 IP20 ±0°..+60°C