Honeywell M4410L4x00 Actuator Installation Instructions

This document provides installation instructions for the Honeywell M4410L4x00 actuator, available in M4410L4500 (Version NC - Normally Closed) and M4410L4000 (Version NO - Normally Open) models.

Assembly, Disassembly, and Connection

Follow these steps for mounting, dismounting, and connecting the actuator:

Assembly (Montage): General assembly steps are indicated by numbered diagrams.
- Step 1: Basic mounting.
- Step 2: Securing the actuator, possibly with a 'click' mechanism and 360° rotation.
- Step 3: Electrical connection.
Disassembly (Demontage): General disassembly steps are indicated by diagrams.
Connection (Anschluss):
- Connect to 230V power supply (L, N).
- Wire colors: Brown (L), Blue (N).

Functionality and Checks

"First-Open" Function

The actuator features a "First-Open" function. This is indicated for both Normally Closed (NC) and Normally Open (NO) versions.

Adaptation Check (Anpassungskontrolle)

Perform an adaptation check:

Power on the device. Wait for more than 6 minutes.
Power off the device.
The check involves a small stroke of approximately 0.5 mm.
The total stroke for both NC and NO versions is 5.0 mm.

Function Mode (Funktionsweise)

The actuator operates by receiving power. The diagrams illustrate the power on and power off states.

Technical Specifications

The following specifications apply to the M4410L4x00 series:

Specification	Value
Operating Voltage	230 V, +10%...-10%, 50/60 Hz
Operating Power	1 W
Max. Inrush Current	< 550 mA for max. 100 ms
Actuating Force	100 N +5%
Type of Protection	IP 54
Ambient Temperature	0 ... +60 °C
Storage Temperature	-25 ... +60 °C
Stroke (Version NC)	M4410L4500 = 5.0 mm
Stroke (Version NO)	M4410L4000 = 5.0 mm

Manufacturer Information

Manufactured for and on behalf of the Environmental & Energy Solutions Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:

Automation and Control Solutions
Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich, Germany

Phone: +49 (0) 7031 637 01

Fax: +49 (0) 7031 637 740

Website: http://ecc.emea.honeywell.com

The product bears the CE mark.

	Honeywell M847D Direct Drive Damper Actuator Installation Instructions Comprehensive installation instructions and specifications for the Honeywell M847D Direct Drive Damper Actuator, designed for controlling airflow in zone dampers. Includes details on application, specifications, mounting, wiring, and adjustments.
	Honeywell Z74S-AN Reverse Rinsing Actuator - Technical Specifications and Operation Detailed information on the Honeywell Z74S-AN reverse rinsing actuator, including its application, special features, technical data, installation guidelines, and dimensions. Suitable for automatic filter cleaning.
	Honeywell SMARTLINK DS with SLATE Fuel/Air Ratio Module: Changing Communications Settings Technical update from Honeywell detailing how to change the command input setting on the SMARTLINK DS actuator from 4-20mA to serial Modbus for optimal communication with the SLATE Fuel/Air Ratio Module.
	Honeywell MICRO SWITCH SZL-VL-S Miniature Limit Switch Installation Instructions Detailed installation guide for the Honeywell MICRO SWITCH SZL-VL-S Miniature Limit Switch, covering safety warnings, mounting procedures, head direction changes, wiring, performance specifications, dimensional drawings, and warranty information.
	Honeywell M4410C4x00 Installation Instructions Detailed installation and technical specifications for the Honeywell M4410C4x00 actuator, including normally closed (NC) and normally open (NO) versions.
	Honeywell Modutrol IV Motors M7274, M7284, M7294 - Technical Specifications and Features Detailed information on Honeywell Modutrol IV Motors (M7274, M7284, M7294) including technical specifications, features, applications, and accessories. Control dampers and valves with electronic signals.
	MICRO SWITCH GLS MIN-DIN Series Global Limit Switch Installation Instructions Comprehensive installation, mounting, wiring, and operating specifications for Honeywell's MICRO SWITCH GLS MIN-DIN Series Global Limit Switches (GLC, GLD, GLE). Includes safety warnings, product nomenclature, and detailed technical data.
	Honeywell ABP Series: Installation Instructions and Technical Specifications Detailed installation instructions and technical specifications for Honeywell's ABP Series Basic Amplified Board Mount Pressure Sensors, covering general specifications, environmental data, pressure ranges, operating parameters, and package dimensions.