SAFE BOX USER MANUAL

We are committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimated saving compared to major brands and do not necessarily cover all product categories. Please verify savings carefully when placing an order.

NEED HELP? CONTACT US!

For product questions or technical support, please contact us:

CustomerService@vevor.com

This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret this user manual. The product appearance is subject to the item received. We will not provide further notification for technology or software updates.

IMPORTANT SAFETY INFORMATION

⚠️ Warning: To reduce the risk of injury, user must read instructions manual carefully.

[FCC Compliance] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[WEEE Compliance] ♻️ This product is subject to the provision of European Directive 2012/19/EC. The symbol ?️❌ indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such must not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices.

INSTRUCTIONS

Thank you for choosing this safe box. Please read all instructions before using it to achieve the best possible results.

Product Diagram

The diagram shows a detailed illustration of the safe box. On the left, the exterior view displays the digital keypad, an emergency keyhole, and the main handle. The interior view, shown in the center and right, reveals the internal structure. It includes a built-in storage locker, a removable partition, a clapboard, and a gun rack designed to hold multiple firearms. There are also compartments for bullet boxes, an LED light, a battery box, and a setting button.

Key components labeled:

• Built-in storage Locker
• Pistol rack
• Partition
• Clapboard
• Gun rack
• Digital keys
• Emergency key hole
• The handle
• Bullet box
• LED light
• Battery box
• Setting button

TECHNICAL PARAMETERS

PARTS LIST

WARNING

1. Danger of Tipping Over
   • A child or adult can tip the safe and be killed or seriously injured.
   • Serious injury may occur to children and adults if the safe is not secured before installation.
   • Children should not play with or around the safe at any time.
2. Please Do Not Put the Emergency Key, the External Power Box In The Safe BOX

GETTING STARTED

1. Move down the silver part of the keyboard lock to reveal the emergency keyhole.
2. The emergency key channel is now exposed.
3. Insert the emergency key into the keyhole and turn it 35° ↩️.
4. Turn the Handle ↪️ to open the safe.
5. Tip: Use the emergency key when opening the door for the first time. After installing the battery, set the fingerprint and digital password.

INSTALL BATTERIES

1. Take up the battery box cover.
2. Install 4 AA batteries and pull the battery cover back. ⚠️ (Caution: Do not use Lithium Battery or different brand of recharging batteries.)
3. Continue to the next step.

The original password is :123456#. No fingerprint recognition is set for the factory blank fingerprint.

SETTING MANAGEMENT CODE

1. Press the green setting button in the box; when you hear "beep", the screen light will turn on.
2. Enter the new password and end with #.
3. The password must be 3-12 digits. When you hear a long "beep", the new password is set successfully.

Tip: In standby mode, press the green button in the box (fingerprint delete key) for about 5 seconds. When you hear a long "Di" sound, it indicates that all passwords have been successfully deleted, and factory settings are restored.

SETTING PERSONAL CODE

1. After unlocking, touch the screen to wake it up.
2. Press number 00, then press the green setting button in the box.
3. Enter a new password and end with #. The password must be 3-12 digits.

OPEN THE SAFE

1. Input the correct user password. The electromagnet will pull, the screen will display the unlock status. Turn the handle ↪️ to open the door successfully.
2. If the identification is successful, the screen will show the unlock status.

ALARM FUNCTION

1. In the standby state, press "*", and you will hear a "beep" sound. The digital pad will turn off, indicating it is under the alert state. The safe will alarm if it vibrates. You can enter the password or fingerprint to open the door, and the alarm will automatically be relieved. The warning sound will last for 30s.
2. If you input the wrong password three times, the warning sound will last for 30s.

Tips: After a warning, enter the correct fingerprint or password. Then the electromagnet closes for 5 seconds, and the alert state will be lifted automatically.

NOISE ELIMINATION FUNCTION

Touch the screen to wake it up. Press "11#" to turn on or off all sounds.

UNDERVOLTAGE INDICATION

1. The safe requires four 1.5V alkaline batteries.
2. If the voltage is insufficient, a buzzer inside the door will remind you with a "beep" sound, prompting the user to replace the battery in time.

Note: It is recommended to use ordinary batteries. Avoid using lithium batteries or different brands of recharging batteries.

MOUNTING INSTRUCTIONS

The safe can be mounted to a wall or floor.

• Drill the appropriate size holes for the anchors you are using.
• Mount the safe by running screws from inside the safe and securing to anchors. Ensure the safe is mounted securely on the floor.
• Use proper drill tools depending on the type of floor you are mounting (wood, tile, or concrete).