INSTALLATION MANUAL
50110CE
Product Features and Specifications
Type: LED BUILT IN Downlight
Color Rendering Index (CRI): 80
Power Supply: 230V
Light Source: SMD 4014
Wattage: 10W
Ingress Protection Rating: IP20
Materials: Aluminium + PC
Included Accessory: Complete with 250mA driver.
Certifications: CE, RoHS COMPLIANT
Dimmable: Yes
Dimensions:
Fitting Diameter: 120mm
Cut-out Diameter Range: 50-100mm
Minimum Ceiling Thickness: 50mm
Fitting Depth: 10mm
Fitting Height: 70mm
Brand: ONE LIGHT
Installation Guide
The following diagram illustrates the installation process:
- Component A: The main downlight fitting, equipped with spring-loaded clips (indicated by arrows showing expansion/contraction) for securing it into the ceiling aperture. An upward arrow (E) indicates the correct orientation.
- Component B: Represents the prepared opening or cut-out in the ceiling. The required cut-out diameter is specified as 50-100mm.
- Component C: Shows the flexible cable connecting the downlight fitting to the LED driver.
- Component D: The LED driver unit. This is a compact electronic device with terminals for connecting the mains power (Live 'L' and Neutral 'N') and an output connector for the downlight.
Important Warnings
- Ensure the product is correctly installed before connecting it to the electrical supply.
- Do not obstruct or cover the downlight fitting once installed.
- All maintenance and installation procedures must be performed by a qualified electrician.
