Tenda

Package Contents

• 4G LTE Advanced Pocket WiFi Hotspot X 1
• Li-ion Battery X 1
• USB Cable X 1
• User Manual X 1

For product or function details, please go to www.tendacn.com to download the user guide.

Install SIM card and Battery

1. Remove the back cover. Install Micro SIM card and Battery.

Note:

• Nano SIM card must be converted using the provided SIM card tray.
• SIM card and SD card are not included.

[Diagram Description: Shows the back cover of the device being removed, a Micro SIM card being inserted into a SIM card tray, and the Li-ion battery being placed into its compartment.]

Access the Internet

Method 1: Via Wired Connection

Connect your wired device, such as a computer, to the Micro USB port of the Hotspot using an Ethernet cable.

[Diagram Description: Illustrates a computer connected to the Tenda 4G180 device via an Ethernet cable plugged into the Micro USB port.]

Method 2: Via Wireless Connection

Connect your wireless device, such as a smartphone, to the Wi-Fi network of the Hotspot using the Wi-Fi Name (SSID) and Wi-Fi Key labeled on the inner side of the back cover.

SSID: Tenda_XXXXXX

Wi-Fi Key: XXXXXXXX

[Diagram Description: Shows a smartphone establishing a wireless connection to the Tenda 4G180 device.]

To further configure the Hotspot, log in to the web UI of the Hotspot by visiting 192.168.0.1 on a connected device.

Note: If you cannot log in to the web UI of the Hotspot, refer to Q3 in FAQ.

LED Indicators

[Diagram Description: An illustration of the Tenda 4G180 device highlighting its LED screen. A table details the status of various indicators.]

Charging your Mobile Wi-Fi hotspot

Method 1: Via wall outlet

[Diagram Description: Shows the Tenda 4G180 device connected via a USB cable to a wall power adapter.]

Method 2: Via Computer

[Diagram Description: Shows the Tenda 4G180 device connected via a USB cable to a computer's USB port.]

Note: If you can't access the Internet, refer to Q1 in FAQ to find a solution.

FAQ

Q1. I cannot access the Internet. What should I do?

A1. Verify your USIM/SIM is prepaid and has enough balance.

A2. Verify your device is always in the valid range.

A3. Verify you input the correct pass phrase (Wi-Fi Key) when connecting to this mobile hotspot's SSID (Wi-Fi name). Verify that you input the default PIN code of SIM card if your service provider has provided you with a PIN code.

A4. Close firewall of your computer.

Q2. When the device is connected via the USB cable, the driver of this device isn't installed automatically. What should I do?

A1. Restart your PC or notebook.

A2. Unplug the USB cable and plug it again.

A3. Click "Open folder to view files", click the 4G Mi-Fi driver setup program and then follow onscreen installations to install the program.

A4. On your desktop, double click "Computer" (in Windows 7 OS), locate the CD driver and double click it to install the program.

Q3. I cannot login to its web UI. What should I do?

A1. Verify that your terminal device (notebook, smartphone, iPad, etc.) is connecting to 4G180.

A2. Clear the cookies and caches of the browser you launch.

A3. Close all browsers and reopen one.

A4. Verify that your terminal device has obtained an IP address within the range of 192.168.0.2~192.168.0.253 (default).

A5. Verify that you've entered the correct login IP address 192.168.0.1 (default).

Q5: How to change my Wi-Fi name and Wi-Fi Key?

A1. Log in to the web UI of the Hotspot on your wired or wireless device, navigate to Wi-Fi Settings > Wi-Fi Name & Wi-Fi Key and customize your Wi-Fi name and Wi-Fi Key.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

This equipment should be installed and operated with a minimum distance of 20cm between the device and your body.

NOTE:

• (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
• (2) To avoid unnecessary radiation interference, it is recommended to use a shielded USB cable.

Declaration of Conformity

Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type 4G180 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/download-cata-106.html

Operating Frequency: 2.4 GHz: EU/2400-2483.5MHz (CH1-CH13)

EIRP Power (Max.): 2.4 GHz < 20dBm

Software Version: XFNJ_B03P14_F231CE_V3.0_SM_FX_TD_PXXX

(Note: Declarations of Conformity in other languages such as Spanish, Czech, German, French, Italian, Polish, Portuguese, Romanian, and Russian are also present in the original document.)

Caution

Battery Model: 4G

Manufacturer: Shenzhen Powercome Electronics Co., LTD

Operating Environment

Temperature: 0°C-40°C

Humidity: (10-90) %RH, non-condensing

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.

Technical Support

Shenzhen Tenda Technology Co., Ltd.

6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052

USA hotline: 1-800-570-5892 (Toll Free: 7 x 24 hours)

Hong Kong hotline: 00852-81931998

Global hotline: +86 755-2765 7180 (China Time Zone)

Website: www.tendacn.com

E-mail: support@tenda.com.cn

Copyright

©2020 Shenzhen Tenda Technology Co., Ltd. All rights reserved.

Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.