User Manual for Denver models including: Soundbar

Soundbar User Manual - Denver Electronics

What's in the Box? Remote Control Screws. Power Supplies. Aux Cable. User Manual. Connecting Your Sound Bar to Your TV or other sources:.

Instrukcja obsługi

Denver DSB-4020 od PLN 259,00 (2022) | Porównanie cen Cenowarka Polska

Denver DSB-4020 od PLN 200,99 (2023) | Porównanie cen Cenowarka Polska


File Info : application/pdf, 4 Pages, 257.92KB

PDF preview unavailable. Download the PDF instead.

64c6d4f0bbb57ac46f3e61f291b4c5f23367
What's in the Box?

Soundbar User Manual
Sound bar

Remote Control Screws Power Supplies

Aux Cable

User Manual

Connecting Your Sound Bar to Your TV or other sources:

Illustration of the Soundbar connectors for different connections:

EN

EN

HDMI-ARC HDMI-ARC

OPTICAL OPTICAL

LINE IN LINE IN

DC IN

DC IN

1a. Is an HDMI input jack on your TV labeled "ARC"?

1b. Don't have ARC or Optical output available on your TV?

YES TV

HDMI

HDMI OPTICAL AUX

ARC

HEADPHONE

NO TV

HDMI

HDMI OPTICAL AUX HEADPHONE

TV

HDMI

HDMI OPTICAL AUX

ARC

HEADPHONE

Use HDMI cable (V1.4 above) Use Optical cable to connect the

to connect the sound bar to sound bar to the TV, DVD player

the TV ARC socket.

or set top box.

Connecting the sound bar identified LINE IN to the TV with the provided AUX cable.

NOTE: All cables what you needed should be plugged in before Power Supplies connected. 2. Connect the Power Supplies to Sound Bar
then power Insert Power Supplies to an AC outlet.

A red LED will pulse on the front of the sound bar indicating boot up.

3. Turn on your sound bar.
Placing the Soundbar on a flat and solid surface. Hold the Power button /MODE at the right side
of the sound bar or Press RED key on the remote control to turn it on. Selecting Mode (input
source) as the following instruction to enjoy your powerful sound. When the Soundbar is switched
to standby, the red dot is turned on. NOTE: 1. RESET: Hang up is solved by disconnecting and reconnected the power supplies.
2. It will be standby within 10 munities if no signal from Line In, BT, USB, ARC and Optical inputs. It also will be standby if the low sound from Line In need to be heard within about 15cm distance.

The control panel on the Soundbar:

Symbol /MODE

Hold
Power On/ Standby

/ MUTE

VOL+ / VOL- /

Volume up Volume down

Operation Press
Toggle the Mode change: LINE IN  Bluetooth  USB Drive  ARC  Optical Pause/Play (USB/Bluetooth Mode) Mute / No Mute Next USB Drive/Bluetooth Song
Next USB Drive/Bluetooth Song.

Remote control buttons

Switch the product on or to standby

Mute or restore volume

EQ

Equalizer: Eq0: Normal, Eq1: Rock, Eq2:Pop,

Eq3:Classic, Eq4: Jazz, Eq5: Country, Eq6: Music

Decrease volume

Increase volume

Skip to previous audio file during USB/BT play

Pause or play USB/BT audio file

Skip to next audio file during USB/BT play

Repeat audio during USB play

MODE

Select an audio source *

*MODE (source) selection shown on the LED display. Line In source

Bluetooth source  Flashes if the Soundbar is not paired or connected
to a bluetooth device.  Lights up if the Soundbar is paired.
USB source when connecting to a USB drive

HDMI-ARC source

Optical In source

Importance Notice for soundbar mounting on the wall: 1) Wall-mounted installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage! (If you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing, which may be hidden inside or behind the wall.) 2) It is the installer's responsibility to verify and confirm that the wall will safely support the total load of the unit and wall brackets. 3) Additional tools (not included) are required for the installation. 4) Do not overtighten screws. 5) Use an electronic stud finder to check the wall type before drilling and mounting 6) The proposed height on the wall is 1.0~1.5meters 7) The strain relief (<23mm) of HDMI cable is recommended for more space during mounting.
Technical Specifications

Power consumption: Max output power: Working temperature: Bluetooth version: Operating frequency range: Soundbar measurement: Bluetooth name:
Power Supplies Information: Manufacturer: Commercial registration number: Address:
Trade mark Model: Input voltage: Input AC frequency: Output voltage: Output current: Output power Max output power: Average active efficiency: Efficiency at low load (10%): No-load power consumption:

40W 40W 0~35 0C 5.1 2402-2480Mhz 80cm * 6cm * 6cm DSB-4020
SHENZHEN FIT-POWER TECHNOLOGY CO., LTD. 91440300577672653M 201, NO.7 RIFU ROAD, EAST DISTRICT, BAISHIXIA COMMUNITY, FUYONG, BAOAN SHENZHEN FIT-POWER TP04-180200E 100-240V~ 50/60Hz DC18V 2.0A 36W 54W 87% 82% 0.1W or less

Please notice - All products are subject to change without any notice. We take reservations for errors

and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Hereby, Inter Sales A/S declares that the radio equipment type DSB-4020 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the search ICON on topline of website. Write model number: DSB-4020. Now enter product page, and red directive is found under downloads/other downloads. Operating Frequency Range: 2402-2480Mhz Max Output Power: 40W
DENVER ELECTRONICS A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.com/denverelectronics



References

Foxit Reader Printer Version 9.4.0.1491