ETA Ellen 8596 Electric Kettle

Safety Warnings

• ⚠ Before first use, read instructions carefully, look at pictures, and store for future reference. Consider instructions as part of the appliance and pass them on.
• Check type label voltage against your socket. Connect plug to a properly connected and grounded socket.
• Children aged 8+ can use the appliance if supervised or instructed on safe use and potential risks. Cleaning/maintenance by unsupervised children under 8 is prohibited. Keep children under 8 away from the appliance and cord.
• Persons with reduced physical/mental abilities or lack of experience can use it only if supervised or instructed on safe use and potential dangers.
• Children must not play with the appliance.
• Use the kettle only with its designed stand.
• Never immerse the kettle or stand in water or other liquids (even partially).
• If the power cord is damaged, it must be replaced by the manufacturer, service technician, or similarly qualified person to prevent hazards.
• Never use the appliance if its power cord or plug is damaged, it malfunctions, it fell and was damaged, or fell into water. Take it to a special service for safety/function check.
• The kettle is for heating a maximum of 1.5 L of water. Exceeding the maximum level may cause hot water splashing.
• WARNING: Do not open the lid when water is boiling or very hot.
• CAUTION: Do not use with timers, time switches, or automatic turn-on devices, as there is a fire risk if the appliance is not covered or placed properly.
• When in operation, prevent pets, plants, or insects from contacting the appliance.
• Do not plug/unplug the cord with wet hands or by pulling the cord.
• This appliance is not intended for outdoor use.
• The appliance is for home use and similar environments (shops, offices, hotels, etc.), not commercial use.
• Never leave the appliance unsupervised during water heating.
• Use the kettle only with its designed stand and for its intended purpose.
• Do not place objects on the appliance.
• The kettle is for heating water only. Do not insert tea bags, loose tea, or other ingredients.
• Use the appliance in a working position, away from heat sources (heaters, stoves, ovens, grills), flammable objects (curtains), and wet surfaces (sinks).
• Do not place near or under objects that could be damaged by steam (walls, cupboards, pictures, curtains). Leaking steam can cause damage. Never place the kettle on a cooker.
• Do not use in environments saturated with explosive or flammable vapors.
• Do not use in rooms where chemicals, paints, or other flammable, explosive, volatile, or harmful substances are used or stored.
• Ensure water is in the kettle before operation. Do not fill the kettle while it is on the stand.
• Before switching on, ensure water level is between MIN and MAX marks.
• Prevent injuries from hot water or steam. Pour water at a slight angle.
• If not using for an extended period, unplug the stand from the power supply.
• The appliance has a safety lock that disconnects power if the steam sensor fails, water boils away, or an empty kettle is turned on. If this happens, unplug and let it cool. Do not fill with cold water to cool it down quickly, as it may reduce the heating element's lifespan.
• Never place the power cord on hot surfaces or let it hang over edges. Pulling the cord (e.g., by children) can cause tipping or drawing the appliance down, leading to serious injury.
• The power cord must not be damaged by sharp/hot objects, open fire, immersion in water, or bending over sharp edges.
• Use this appliance only for its intended purpose as specified.
• The producer is not responsible for damage caused by improper use (e.g., burns, scalding, fire). The guarantee does not apply if safety warnings are not followed.

Product Description

The ETA Ellen 8596 is a stainless steel electric kettle with temperature regulation.

A - Kettle

• A1 - Handle
• A2 - Water Level Indicator
• A3 - Lid
• A4 - Lid Lock Button

B - Control Panel

• B1 - ON/OFF Button
• B2 - Keep Warm Button
• B3 - Temperature Setting Buttons (+/-)
• B4 - Display (Current/Set Temperature)
• B5 - Heating Function Indicator
• B6 - Keep Warm Function Indicator

C - Removable Stand

• C1 - Center Connector
• C2 - Power Supply Cord

The control electronics ensure automatic shut-off after reaching the set temperature or boiling point.

Instructions for Use

Before First Use

Fill the kettle with clean cold water up to the MAX level, turn it on, and let it boil. Pour out the water and repeat this process several times (at least five times).

Use

1. Plug the power supply cord into an electrical outlet.
2. Open the lid (A3) by pressing the lid lock button (A4) and fill the kettle with drinking water. The minimum and maximum water levels are marked on the water level indicator (A2). Close the lid by snapping it shut.
3. Place the filled kettle on the base. A sound signal will be heard, indicator lamps (B5 and B6) will flash once, and the water temperature will be displayed on (B4).

A) Water Heating to 100°C

Press the ON/OFF button (B1) to start heating. The display will show '100' twice, and the heating indicator (B5) will light up. When the water reaches boiling point, heating switches off (two beeps), and the kettle enters standby mode. The display shows the current water temperature. After 20 minutes of inactivity, the kettle automatically switches off (display goes out).

B) Water Heating to a Temperature of 40-90°C

Use the temperature setting buttons (B3) to select the desired heating temperature (40-50-60-70-80-90°C). The selected value flashes briefly on the display (B4) then shows the current temperature. Press the ON/OFF button (B1) to start heating. The heating indicator (B5) lights up, and the display shows the current water temperature during heating. Once the desired temperature is reached, heating automatically switches off (two beeps), and the kettle enters standby mode. After 20 minutes of inactivity, it switches off automatically.

Temperature Guide:

• 40°C = Infant formula milk
• 50°C = Baby foods
• 60°C = Hot beverages
• 70°C = Green tea
• 80°C = White teas
• 90°C = Oolong teas, coffee, instant drinks, soups
• 100°C = Black, herbal teas

Notes and Recommendations

• Note: If heating water to a lower temperature (40-70°C), it is advisable to have at least 0.7L of water for accurate temperature achievement. Lower amounts may result in temperatures exceeding the set value.
• The electronic control does not respond without the kettle on the base.
• If you set a lower heating temperature than the current water temperature, the kettle will turn off.
• For preparing baby food (e.g., at 40°C), boil the water to 100°C first.
• The temperature sensor is at the bottom, and readings may have slight variations due to temperature differences.
• After approximately 20 minutes of inactivity, the kettle enters sleep mode (display turns off). Press B1 or B3 to wake it up.
• WARNING: If the kettle is off and B2 is pressed, the reheat function activates immediately to the last set temperature and maintains it.

KEEP WARM Function

Press B3 to select the desired temperature (40-50-60-70-80-90°C). Press B2 to start heating and the KEEP WARM function. Indicators B5 and B6 will light up. Upon reaching the set temperature, a sound signal will be heard, and the temperature maintenance function (B6 indicator stays lit, display shows temperature) will activate automatically. This function lasts for approximately 2 hours, then the device switches off (two beeps). After 20 minutes of inactivity, it switches off automatically.

Memory Function (for Keep Warm)

The kettle has a memory function for the Keep Warm feature. If the kettle is removed from the base and replaced within 30 minutes while Keep Warm is active, it will resume maintaining the temperature (provided the water temperature is within ±5°C of the set temperature).

• Note: If you set a lower temperature than the current one while KEEP WARM is active, the kettle will maintain the set temperature. It will wait for the water temperature to drop to the set value before maintaining it.
• Water heating, including KEEP WARM, can be interrupted by pressing B1 or B2, or by lifting the kettle from the base.

Maintenance

• Before any maintenance, unplug the appliance from the power outlet. Clean only after the kettle has cooled down.
• Do not use harsh or abrasive cleaning agents (sharp objects, scrapers, solvents).
• The kettle housing is high-quality plastic, and the heating base/interior is high-quality stainless steel. Scale may form above the heating element during normal use, which is not a defect.

Cleaning the Kettle

Do not use vinegar. Use an ETA-AKTIV descaler or the following method: Add about 50g of citric acid to the kettle with scale. Fill halfway with water, mix, and let dissolve. Then fill to 3/4 of the maximum capacity. Place on the base, turn on, and switch off before boiling. Let the solution sit for about 10 minutes, then pour out. Rinse thoroughly with clean water. Repeat if heavily soiled. Clean regularly.

Any element requiring intervention in the electrical parts must be performed by qualified service personnel. Failure to follow manufacturer instructions voids the repair warranty.

Error Messages on Display:

Ecology

Symbols on the product or documentation indicate that used electrical or electronic products must not be disposed of with municipal waste. Hand them over to designated collection points for free disposal. Proper disposal helps preserve natural resources and prevents negative environmental/health impacts. Contact local authorities for details. Incorrect disposal may incur penalties. To permanently disable the appliance, cut the power cord.

Technical Data

The manufacturer reserves the right to change technical specifications and accessories.

Warnings and Symbols Used

• HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
• ⚠ TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, ARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.