Thule Kit 145196 Installation Guide

Kit Overview and Safety

This document details the installation of Thule Kit 145196, designed for the Audi A5 Sportback (F5). The kit is part of a larger roof rack system that requires a separate purchase of Thule Foot Packs and Crossbars.

Kit Contents

The Thule Kit 145196 includes specific fitting components:

• Part 397 (x2)
• Part 398 (x1)
• Part 197 (x1)
• Part 198 (x1)
• Part 295 (x1)
• Part 296 (x1)
• Part 399 (x1)
• Part 400 (x1)

Safety Information and Load Limits

Adhere to the following safety guidelines:

• Maximum load per foot: 7 kg (15.4 lbs) ⚖️.
• Maximum total roof load capacity: 60 kg (132 lbs) ⚖️.
• Maximum driving speed: 130 km/h (80 Mph) ?.
• Reduced maximum speed: 80 km/h (50 Mph) ? (indicated by a warning symbol ⚠️, typically for specific conditions or when carrying certain loads).

Ensure the roof rack system is correctly installed and all components are securely fastened before driving.

Installation Procedure

The installation involves attaching the specific kit parts to the vehicle's door frame and then mounting the Thule Foot Pack and Crossbars.

Step 1: Identify Kit Components

Lay out all parts of Kit 145196 and verify against the provided list and diagrams. The components are labeled with numbers (e.g., 397, 398, 197, 198, 295, 296, 399, 400).

Step 2: Fit Kit Parts to Vehicle

This step involves attaching the specific clips and adapters to the car's door frame. The diagrams show how to position these parts at the four mounting locations: Front-Left (FL), Front-Right (FR), Rear-Left (RL), and Rear-Right (RR). For example, parts 397 and 296 are associated with the FL position, while 399 and 198 are for RL, 295 and 398 for FR, and 197 and 400 for RR.

Detailed views illustrate how the clips and straps engage with the vehicle's bodywork. A "Click" sound ? confirms proper locking of certain components.

Step 3: Mount Foot Pack and Crossbars

Attach the Thule Foot Pack to the vehicle, following the instructions for the specific foot pack model. Then, mount the Thule Crossbars (e.g., WingBar Evo, WingBar Edge, etc.) onto the foot packs. Ensure the bars are correctly oriented and secured.

Step 4: Final Tightening and Check

Tighten all bolts and clamps to the specified torque (if applicable) and perform a final check to ensure the entire system is stable and secure.

Vehicle Specific Dimensions and Bar Compatibility

The following information is specific to the Audi A5 Sportback (F5), 5-door Hatchback, 2017-2025, and compatibility with various Thule bar systems:

Compatible Thule Bar Systems

• THULE WingBar Evo
• THULE WingBar Edge
• THULE WingBar
• THULE SquareBar Evo
• THULE ProBar Evo
• THULE SlideBar Evo

Dimensional Data

The following measurements are critical for correct fitment:

• X (Scale): 42 M (for Evo/Edge bars)
• X (mm/inch): 1071 mm / 42 1/8" (for Evo/Edge bars)
• Y (Scale): 39,5 R (for Evo/Edge bars)
• Y (mm/inch): 1046 mm / 41 1/8" (for Evo/Edge bars)
• W (mm/inch): 715 mm / 28 1/8" (general width measurement)
• Z (mm/inch): 155 mm / 6 1/8" (general depth measurement)

Diagrams illustrate the placement of these measurements on the vehicle's roof.