Vaporesso GEN 200 & 80 S User Manual

Introduction

Thank you for choosing a Vaporesso product. Please read this instruction carefully before use to ensure a perfect experience. For any additional requirements, please consult the local agent or visit the Vaporesso website: www.vaporesso.com.

VAPORESSO GEN 200

Exploded View:

Drip Tip
Top Cap
Glass Tube
Air-Inlet Port
Power Button
0.96" TFT Screen
'+' Button
Mode/Confirm Button
'-' Button
Type-C USB Port

Specification:

Dimensions: 138.5*44*29mm
TANK Capacity: 8ml/2ml(TPD)
Coils & Suggested Wattage: GTI 0.2Ω MESH Coil (60-75W), GTI 0.4Ω MESH Coil (50-60W)
Battery Capacity: 2 x 18650
Output Power: 5-220W
Charging Current: DC 5V/2A, Type-C
Battery Display: 0.96" TFT Screen

Packing List:

1 x VAPORESSO GEN 200 MOD
1 x VAPORESSO iTANK (8ml/2ml TPD)
1 x GTi 0.2Ω MESH Coil (Pre-installed)
1 x GTi 0.4Ω MESH Coil (In-BOX)
1 x Extra Glass Tube
3 x O-ring
1 x Type-C Cable
1 x User Manual
1 x Warranty Card

VAPORESSO GEN 80 S

Exploded View:

Drip Tip
Top Cap
Glass Tube
Air-Inlet Port
Power Button
0.96" TFT Screen
'+' Button
Mode/Confirm Button
'-' Button
Type-C USB Port

Specification:

Dimensions: 140.5 x 34 x 25.5 mm
TANK Capacity: 5ml/2ml(TPD)
Coils & Suggested Wattage: GTI 0.2Ω MESH Coil (60-75W), GTI 0.4Ω MESH Coil (50-60W)
Battery Capacity: 1 x 18650 Battery (Not Included)
Output Power: 5-80W
Charging Current: DC 5V/2A, Type-C
Battery Display: 0.96" TFT Screen

Packing List:

1 x VAPORESSO GEN 80 S MOD
1 x VAPORESSO iTANK (5ml/2ml TPD)
1 x GTi 0.2Ω MESH Coil (Pre-installed)
1 x GTi 0.4Ω MESH Coil (In-BOX)
1 x Extra Glass Tube
3 x O-ring
1 x Type-C Cable
1 x User Manual
1 x Warranty Card

Figure Descriptions

Figure 1: Replace the coil

Illustrates the process of removing and installing a coil, showing steps like unscrewing the base, pulling out the old coil, inserting a new one, and reattaching the base.

Figure 2: Fill e-liquid

Shows how to fill the e-liquid tank by pushing the top cap, filling through the hole, and then locking the cap. It also mentions waiting 5 minutes for the e-liquid to soak into the coil.

Figure 3 User Interface

Depicts the device's screen interface, labeling key elements such as System Lock, Smart VW, Resistance, Puff Counter, Output Mode, Wattage, Output Voltage, Battery Level, and Vaping Time.

User Instructions

Install the Tank: Screw the tank onto the battery ensuring a firm connection.
Replace the Coil: Unscrew the base, pull out the old coil, insert a new coil, and reattach the base.
Fill E-liquid: Push the top cap, fill through the hole, lock the cap, and wait 5 minutes for the coil to saturate.
Adjust Airflow: Rotate the air-inlet ring on the bottom of the tank.
Power On/Off: Press the power button 5 times within 2 seconds.
Power Adjustment: The GEN 200 & 80 S Kit uses the GTi coil platform. Refer to the suggested wattage for the GTI MESH coils (0.2Ω: 60-75W, 0.4Ω: 50-60W).
Start Vaping: Press the power button.
Charge the Battery: Connect the Type-C cable to the battery. The battery indicator and remaining charging time will be displayed.
Lock/Unlock Device: Press the fire button 3 times to lock/unlock the +, -, and mode buttons.
Choose a Mode:
- Long press the mode button for main mode selection (Pulse Mode/F(t) Mode/VWN Mode).
- Press the mode button 3 times continuously for secondary menu settings.
- F(t) MODE: Adjusts temperature, heating speed, and time for optimal flavor.
- PULSE MODE: Improves vaping experience with constant voltage output for optimal flavor, throat hit, nicotine satisfaction, and temperature.
- VWN MODE: Normal output wattage mode. Adjust wattage based on coil resistance.
- DIY MODE: Choose from VW (H, N, S), VV, BP (Bypass) modes.
- SET: SYSTEM SET: Includes DEFAULT, SMART VW, PUFF, and VERSION options. SMART VW recommends the best power when a TANK is installed.

Protections

The device features various protections:

Short circuit protection & Low resistance protection: Alerts when resistance is below 0.05Ω or 0.09Ω.
No load protection: Alerts when no load resistance is detected.
High resistance protection: Alerts when resistance exceeds 5Ω.
Low voltage protection: Alerts when battery voltage drops below 3.3V.
PCBA protection: Monitors PCBA temperature.
Over discharge protection: Shuts off output when battery voltage drops below 2.9V.
USB High Voltage Input Protection: Stops charging if USB input voltage exceeds 6V.
Over charge protection: Indicates 100% charge when battery voltage reaches 4.2V+/-0.3V.
Auto-shut off protection: Shuts off output if the POWER button is held for 10±1 seconds.

Cautions

Turn off the device when not in use.
Do not leave the charging device unattended.
Avoid dropping, throwing, or misusing the device.
Use a standard USB charger with appropriate current and voltage.
Keep away from water, flammable gases, liquids, and corrosive chemicals.
Avoid direct sunlight, dust, moisture, or mechanical shock.
Do not expose to extreme temperatures.
Recycle EEE and batteries according to local regulations.
Only have the device repaired by Vaporesso.
Do not use batteries with damaged surfaces, overheating, leaks, or strange odors.
Charge batteries indoors only.
Use high-rate discharge batteries (≥25A).

Warnings

This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is addictive and not suitable or recommended for the following individuals:

Persons under the legal smoking age.
Individuals with heart disease, stomach or duodenal ulcers, liver or kidney problems, chronic throat disease, or breathing difficulties due to bronchitis, emphysema, or asthma.
Individuals with an overactive thyroid gland or pheochromocytoma.
Individuals taking certain medications (e.g., Theophylline, Ropinirole, Clozapine).
Non-smokers.
Pregnant or breastfeeding women.

Potential side effects of using nicotine-containing e-liquid include feeling faint, nausea, dizziness, headache, coughing, throat irritation, stomach discomfort, hiccups, nasal congestion, vomiting, chest palpitations, or irregular heartbeat. Consult a healthcare professional if these occur.

This device should not be used by persons under the legal smoking age.

Laser Anti-Counterfeiting Label Instructions

STEP 1 Check the label: Flip the label under light at different angles to see the letter "V" position change.

STEP 2 Verify the QR code: 1. Scratch off the label. 2. Scan the QR code to verify.

Connect with Vaporesso on social media for promotions, product testing, news, and tutorials.

	Vaporesso GEN MAX/SE User Manual Comprehensive user manual for the Vaporesso GEN MAX and GEN SE vaping devices, detailing setup, operation, modes, and safety features.
	Vaporesso GEN PT80 S User Manual - Features, Operation & Safety Comprehensive user manual for the Vaporesso GEN PT80 S vaping device. Get detailed instructions on setup, operation, specifications, safety guidelines, and troubleshooting for your Vaporesso GEN PT80 S.
	Vaporesso ZERO S User Manual Comprehensive user manual for the Vaporesso ZERO S, detailing setup, usage, safety precautions, and troubleshooting. Includes information on pod installation, e-liquid filling, vaping, battery status, charging, and protections.
	Vaporesso APEX User Manual Comprehensive user manual for the Vaporesso APEX, detailing setup, operation, safety precautions, and troubleshooting for this electronic cigarette device.
	Vaporesso XROS Nano User Manual - Specifications and Operation Guide Detailed user manual for the Vaporesso XROS Nano pod system, covering specifications, step-by-step usage instructions, device protections, and important safety warnings.
	Vaporesso Vibe Nano Pro User Manual User manual for the Vaporesso Vibe Nano Pro, detailing its features, usage instructions, protections, cautions, and warranty information.
	Vaporesso Luxe II User Manual Comprehensive user manual for the Vaporesso Luxe II electronic cigarette, detailing specifications, packing list, usage instructions, protections, and warnings. Includes information on installation, e-liquid filling, airflow adjustment, device operation, charging, button functions, and mode selection. Also covers safety precautions and product warnings.
	Vaporesso XROS MINI User Manual - Instructions and Specifications Comprehensive user manual for the Vaporesso XROS MINI, including setup, usage instructions, specifications, protections, and safety warnings. Learn how to replace the pod, fill the e-liquid, and understand battery levels and device protections.