Shenzhen Crony Electronic Technology Co., Ltd. Q-168 Walkie Talkie 2AUPG-Q-168 2AUPGQ168 q 168
! WARNING: CHOKING HAZARD-small parts, Not for children under 3 years. The packaging has to be kept since it contains important information. EN Antenna TX/RX/lcon PTT Scanning VOX Call/Lock Down Speaker Earphone Jack Channel/Menu item Battery Level CTCSS/Menu option Volume Keypad Lock Scan/Monitor UP MIC Power/Menu Belt attachment clip Battery LED Indicators Red Light Charging Green Light Fully Charged Buckle ...Release ...Lock Warming Tips Please read the instructions carefully before use. Warning 1. Please don't put the walkie talkies in the water. 2. Please don't let kids charge alone 3. Please do not approach the fire source 4. Please do not use at the gas station 5. Transformers/ battery chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage has been repaired. 6. "Misuse of transformer can cause electrical shock." 7. 1) "The toy shall only be used with a transformer for toys"; 2) "The transformer is not a toy". 3)Toy to be disconnected from the transformer before cleaning. LED Indication CODE Indicator pattern Name Content Transmitting: TX/RX/lcon Receiving: 88 Channel/ Menu item Press the "MENU" key, then press the "UP" or "DOWN" key to choose the channel. :Fully Charged :Low Battery When the battery is empty, the radio chirps periodically after releasing Battery Level "PTT" button. The radio powers off when the voltage drops below a predetermined level. There are 99 CTCSS/DCS codes. Press "Menu" to set the Channel, CODE Code when the "CODE number "is 88 indication flashing, press the button of "+" "-" to opt the channel, and then press "PTT" to confirm. Press /Mon to SCAN SCAN Scan indication When SCAN function is available, it will show in the display, it will not show when close this function. Voice Activation(VOX) allows VOX Voice you to talk hands-free. Action(VOX) When VOX function is available, it will show in the display. Keyboard Lock Indication When Keyboard lock function is available, it will show in the display (PTT button is Unrestricted) he speaker volume level is indicated Volume by the numbers 1-8 displayed. Level Indication Press "+" to increase the volume. Press "-" to decrease the volume. Key Description Button PTT / / _ + Description Short press to enter the menu setting Long press to lock the key. Press "PTT" to exit the menu. Talking : Press "PTT" to chat. Press "PTT" to confirm and save the seting. Press "PTT" to exit Menu setting. Short Press for Transmit Call Tone. Long Press for Lock or unlock the keypad. In the standby situation, Short press the key to enter "Scanning", Long Press to turn on the "Monitoring function". Press the "" to adjust the volume in the standby situation. This key also can be used to select menu when entering to the "Setting Menu" Press the "+" to adjust the volume in the standby situation. This key also can be used to select menu when entering to the "Setting Menu" Instructions 1. This machine has a built-in polymer lithium battery. Press and hold the power button to turn it on or off. 2. Press the "Menu" to set the channel. When the backlight lights up 6 seconds, the "Channel" icon starts to flash on the monitor, press the "" and "" to select channel and press "PTT" to confirm and exit the setting. Restriction information This product can be used across EU member states. Effective Radiated Power:26.11 dBm Instructions 1. This machine has a built-in polymer lithium battery. Press and hold the power button to turn it on or off. 2. Press the "Menu" to set the channel. When the backlight lights up 6 seconds, the "Channel" icon starts to flash on the monitor, press the "" and "" to select channel and press "PTT" to confirm and exit the setting. USA frequency FRS CH01-CH22 Ch. Freq(MHz) Ch. Freq(MHz) 1 462.5625 12 467.6625 2 462.5875 13 467.6875 3 462.6125 14 467.7125 4 462.6375 15 462.5500 5 462.6625 16 462.5750 6 462.6875 17 467.6000 7 462.7125 18 467.6250 8 467.5625 19 462.6500 9 467.5875 20 462.6750 10 467.6125 21 462.7000 11 467.6375 22 462.7250 3. Press the "Menu" twice to enter the "Code Setting". OFF means no code, 01 code is 67Hz, the 39-99 code is DCS code. Press "PTT" to confirm and exit. Ch Freq. Ch Freq. Ch Freq. Ch Freq. 1 67.0 11 97.4 21 136.5 31 192.8 2 71.9 12 100.0 22 141.3 32 203.5 3 74.4 13 103.5 23 146.2 33 210.7 4 77.0 14 107.2 24 151.4 34 218.1 5 79.7 15 110.9 25 156.7 35 225.7 6 82.5 16 114.8 26 162.2 36 233.6 7 85.4 17 118.8 27 167.9 37 241.8 8 88.5 18 123.0 28 173.8 38 250.3 9 91.5 19 127.3 29 179.9 10 94.8 20 131.8 30 186.2 4. Press the "Menu" for 3 times to enter the "Voice-Activated/VOX" selection. There are 3 sensitivities for options, "OFF", "1", "2" and "3". Press "PTT" to confirm and exit. 5. Press the "Menu" for 4 times to set the "Call Tone". There are 10 kinds of ringtones to choose from. Press "PTT" to confirm and exit. 6. Press the "Menu" for 5 times to enter the "Key Tone Switch" selection. When selecting the "ON" button, it will beep a tone, and if you select the OFF button, there is no tone. Press "PTT" to confirm and exit. 7. Press the "Menu" for 6 times to enter the "Setting Transmit Ending Sound" selection. When selecting the "ON" button, it will beep a tone, and if you select the OFF button, there is no tone. Press "PTT" to confirm and exit. 8. Press the "Menu" 7 times to exit menu setting. You can also press "PTT" to confirm it and exit the setting menu. Press "PTT" to confirm and exit. 9. Headphones: Plug the headphones into the jack to use it. Note: When the power is insufficient, please charge it in time. Please use the 5V/1A adapter, insert the battery charging port, Generally, it can be fully charged in about 4 hours. Red Light means Charging; Green light means fully charged. Precautions The code is the secondary encryption function. Two walkies must be the same channel and code or both of the code showing"OFF", otherwise they can't communicate with each other. Q&A Q1: One of the walkie talkie can't work? A1:The walkie talkie has the secondary encryption function, so please make sure the code number of the walkie talkies are the same or both of the code are displaying "OFF", otherwise, they can't communicate with each other. Notice: The code must be in the same condition. FCC Statement For a Class B digital device or peripheral, the instructions furnished to the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Q2: Why the communication range is different from the description? A2:The walkie talkie's communication range is tested under the barrier-free space, but in the real use scenarios, it will be affected by different factors, such as the building barrier. If you have any question, please contact us with qniglo-serviceteam@outlook.com. This radio is designed for and classified as "General population/ uncontrolled Use" DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. DO NOT transmit for more than 75% of total radio use time, more than 75% of the time can cause RF exposure compliance requirements to be exceeded. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. This device complies with FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Q168 Plus FCC Name of EUT: Walkie Talkie Trade mark: QNIGLO Listed model(s): Q-168 Model/Type reference: Q-168 Plus Power supply: DC 3.7V for 1100mAh Li-Battery DC 6V for 4*AAA Size Battery RF Exposure Environment General Population/ Uncontrolled Hardware Version: PCB-82-V5 Software Version: Operation Band Modulation Type: V01 462.5625MHz~ 462.7125MHz 467.5625MHz~ 467.7125MHz 462.5500MHz~ 462.7250MHz FM(Analog) Emission Designator: 11K0F3E Channel Separation: 12.5kHz Antenna Type: Integral Max Ambient Temperature 15OC ~ 35OC Humidity Dimension 20% ~ 75% Overall (Length x Width x Thickness): 102 x 57 x 27 mm Antenna(Length): 49 mm Q168 Plus CE Name of EUT: Walkie Talkie Trade mark: QNIGLO Listed model(s): Q-168 Model/Type reference: Q-168 Plus Power supply: DC 3.7V for 1100mAh Li-Battery DC 6V for 4*AAA Size Battery RF Exposure Environment General Population/ Uncontrolled Hardware Version: PCB-82-V5 Software Version: V01 Operation Band 446.00625-446.09375MHz Effective Radiated Power 26.11 dBm Modulation Type: FM(Analog) Emission Designator: 11K0F3E Channel Separation: 12.5kHz Antenna Type: Integral Max Ambient Temperature 15OC ~ 35OC Humidity Dimension 20% ~ 75% Overall (Length x Width x Thickness): 102 x 57 x 27 mm Antenna(Length): 49 mmCorel PDF Engine Version 14.0.0.701