Fortinet QuickStart Guide

Fortinet, QSG, QuickStart, FortiSandbox

Fortinet Technical ation

Fortinet QuickStart Guide

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 9 Pages, 6.54MB

Document Document

FortiAI 3500F
QuickStart Guide

Before you begin
Register your device to access FortiGuard updates, cloud management, firmware upgrades, technical support and warranty coverage.
http://support.fortinet.com
March 22, 2022 Copyright© 2020 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet's General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet's internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable. For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf

Box Includes
FortiAI 3500F

QuickStart Guide
1x Sliding Rail Kit (Components and Install Guide)

2x Power Cables (C19 to C20)
1x Console Cable (DB9 to DB9)
1x Ethernet Cable

1x Bezel Plate 4

Front Panel - System

1

2

123

3456

1 System Status LED indicators
Hard Drive Off: Operating normally Hard Drive Amber: Hard drive error Temperature Off: Operating normally Temperature Amber: Fan failure or ambient temperature out of range Electrical Off: Operating normally Electrical Amber: PSU failure or voltage out of range Memory Off: Operating normally Memory Amber: Memory error occured PCIe Indicator: Not in use

2 System Health and System ID LED indicators
Solid Blue: System is on and healthy. Press to switch to System ID mode. Blinking Blue: System ID mode is active. Press to switch to system health mode. Solid Amber: System is in fail-safe mode. Blinking Amber: System is experiencing a fault.
iDRAC Quick Sync 2 module: Not in use.
5

Front Panel - Control

Rear Panel

1 2

3456

1 Hard Drive Power LED indicators
Green: Operating normally Off: Hard drive off
2
Hard Drive activity: Activity dependent on drive carrier Flashes Green for 2 secs: Identifying drive preparing for removal
Off: Drive ready for removal
Flashes Green, Amber, and then turns off: Predicted Drive Failure
Flashes Amber four times: Drive failed
Solid Green: Drive online
Flashes Green for 3 secs, Amber for 3 secs, and turns off after 6 secs: Drive rebuild stopped
3 Power Button LED turns the device on/off
Green: Power is on Off: Power is off
4 USB (2x USB 3.0) for future use 5 Micro USB not in use 6 VGA Port (DB15) connect to a display
6

12 3 4 5 6 7

8

1 ID Button & LED press to identify a system in a rack
Blue: ID function is on Off: ID function is off
2 IPMI Port not in use. Vist http://cookbook.fortinet.com/changing-ipmi-password, to
change the default password
3 CLI Console Port (DB9) optional connection to the management computer.
4 VGA Port (DB15) connect to a display
5 USB (x2 USB 3.0) for future use
6 Port 1 (default management port) 10Gigabit Ethernet connection, IP 192.168.1.88
Port 2 (default sniffer port) 10Gigabit Ethernet connection Green: Connected at 10Gbps
Link Amber: Connected at 1000/100/10 Mbps
LED Off: Not connected
Act Flashing Green: Transmitting & receiving data LED Off: Not in use
7 Ports 3 & 4 (1Gbps) 2x 1Gigabit Ethernet connection
Green: Connected at 1Gbps Link
Amber: Connected at 100/10 Mbps LED
Off: Not connected
Act Flashing Green: Transmitting & receiving data LED Off: Not in use
8 Redundant Power Supplies (2x) 120 - 240V AC, 11.5A, 50/60Hz
Green: The power supply is operating normally Flashing Amber: Power supply failure Off: No power connected
7

Basic Connections

Power Connection

Supplied Power Cable

Power Outlet or UPS

Power Connection

Supplied Power Cable

Power Outlet or UPS

Plug in your device to a power outlet using the provided power cable.

Note: For optimized PSU redundancy, we recommend connecting your FortiAI to a 200-240V power source

Deployment Options
FortiAI support standalone sniffer, integrated mode, or both simultaneously.

8

9

Setup Options
Set up your device locally using the GUI or CLI. Choose an option to complete your setup, then configure your device.

Local Setup

A GUI
An easy-to-use GUI, compatible with most web browsers. To minimize scrolling, the screen resolution should be at least 1280 x 1024 pixels.

Local Setup

B Command Line Interface (CLI)
An alternate configuration tool from the web-based manager that uses a terminal emulation application to type commands or upload batches of commands from a text file or configuration script.

A GUI

BroUwsNseoernPtaoams1se9w:2ao.1drd6m8i.n1.88

Port 1

Ethernet Cable

Management Computer

1. Connect Port 1 to the Management Computer using the supplied Ethernet cable 2. Enable DHCP or set the Management Computer's IP and subnet to:
Static IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 3. Visit 192.168.1.88 in a web browser 4. Log in with username admin and no password 5. You can now configure your FortiAI

10

11

B CLI

Console Port

Console Cable

Serial Port

1. Connect the Console Port with a console cable to the Serial Port on the Management Computer
2. Start a terminal program on the Management Computer and select an available COM Port using the following default settings:

Baud rate: 9600

Data bits: 8

Parity:

None

Stop bits: 1

Flow control: None

3. Log in using username admin and no password

4. You can now configure your FortiAI

12

Cautions and Warnings
Environmental Specifications
Ambient operating temperature: 0°C to 40°C
Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions: Instructions de montage en rack - Les instructions de montage en rack suivantes ou similaires sont incluses avec les instructions d'installation:
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. Température ambiante élevée ­ S'il est installé dans un rack fermé ou à unités multiples, la température ambiante de fonctionnement de l'environnement du rack peut être supérieure à la température ambiante de la pièce. Par conséquent, il est important d'installer le matériel dans un environnement respectant la température ambiante maximale (Tma) stipulée par le fabricant.
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. Ventilation réduite ­ Installation de l'équipement dans un rack doit être telle que la quantité de flux d'air nécessaire au bon fonctionnement de l'équipement n'est pas compromise.
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading. Chargement Mécanique ­ Montage de l'équipement dans le rack doit être telle qu'une situation dangereuse n'est pas lié à un chargement mécanique inégal.
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. Surtension ­ Il convient de prendre l'ensemble des précautions nécessaires lors du branchement de l'équipement au circuit d'alimentation et être particulièrement attentif aux effets de la suralimentation sur le dispositif assurant une protection contre les courts-circuits et le câblage. Ainsi, il est recommandé de tenir compte du numéro d'identification de l'équipement.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips). Fiabilité de la mise à la terre ­ Fiabilité de la mise à la terre de l'équipement monté en rack doit être maintenue. Une attention particulière devrait être accordée aux connexions d'alimentation autres que les connexions directes au circuit de dérivation (par exemple de l'utilisation de bandes de puissance).
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage, humidité et l'altitude).
Safety
Moving parts -- Hazardous moving parts. Keep away from moving fan blades. Pièces mobiles ­ Pièces mobiles dangereuses. Se tenir éloigné des lames mobiles du ventilateur.
Warning: Equipment intended for installation in Restricted Access Location. Avertissement: Le matériel est conçu pour être installé dans un endroit où l'accès est restreint.
Battery ­ Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries. Batterie ­ Risque d'explosion si la batterie est remplacée par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles usagées conformément aux réglementations locales. IMPORTANT: Suisse: l'annexe 4.10 de SR814.013 s'appliquent aux batteries.
  
CAUTION: There is a danger of explosion if a battery is incorrect replaced. Replace only with the same or equivalent type. Dispose batteries of according to the manufacturer's instructions. Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in an explosion. Leaving a battery in an extremely hot environment can result in leakage of flammable liquid, gas, or an explosion. If a battery is subjected to extremely low air pressure, it may result in leakage of flammable liquid, gas, or an explosion.
WARNUNG: Lithium-Batterie Achtung: Explosionsgefahr bei fehlerhafter Batteriewechsel. Ersetzen Sie nur den gleichen oder gleichwertigen Typ. Batterien gemäß den Anweisungen des Herstellers entsorgen.
Beseitigung einer BATTERIE in Feuer oder einen heißen Ofen oder mechanisches Zerkleinern oder Schneiden einer BATTERIE, die zu einer EXPLOSION führen kann
Verlassen einer BATTERIE in einer extrem hohen Umgebungstemperatur, die zu einer EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder Gas führen kann
Eine BATTERIE, die einem extrem niedrigen Luftdruck ausgesetzt ist, der zu einer EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder Gas führen kann.
CAUTION: Shock Hazard. Disconnect all power sources. ATTENTION: Risque d'électrocution. Débranchez toutes les sources d'alimentation.
Caution: Slide/rail mounted equipment is not to be used as a shelf or a work space. Attention: Un équipement monté sur bâti ne doit pas être utilisé sur une étagère ou dans un espace de travail.
13

Regulatory Compliance
Federal Communication Commission (FCC) ­ USA
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
WARNING: Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
Industry Canada Equipment Standard for Digital Equipment (ICES) ­ Canada
CAN ICES-003 (A) / NMB-003 (A)
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regula¬tions of the Canadian Department of Communications.
Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.
European Conformity (CE) - EU
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Voluntary Control Council for Interference (VCCI) ­ Japan
 
 Product Safety Electrical Appliance & Material (PSE) ­ Japan
(PSE)
Bureau of Standards Metrology and Inspection (BSMI) ­ Taiwan
The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below:  (RoHS Table)   https://www.fortinet.com/bsmi

 1762 (02) 27961666
China
A
Korea Certification (KC) ­ Korea
A  ( )   (A)        ,      .

14

15

Fortinet.com