AlcoSense-OneAlcoSense ONE
Low cost, reliable and everyone can afford it. You've got to love the AlcoSense ONE! Entry level yes, but not baseline components. Using new technology like MEMS sensors the AlcoSense ONE beats the competition at a similar price point hands down.
Easy to Use
Like it's bigger brothers, the AlcoSense ONE has been designed to be as easy as possible to use. To do a breath test all you need to do is turn the unit on, wait for it to count down to zero, then blow until it beeps and shows your reading. Easy!
Independently Approved
AlcoSense ONE is the lowest priced product EVER to be approved by the tough US Dept of Transport Standard for Hand Held Breathalysers. The US shares the same drink drive limit as the UK. The approval process includes hundreds of accuracy tests at different temperatures, humidities and alcohol concentrations. Sadly no UK breathalyser approval process or standard exists.
Easy to Understand Results
Slightly different to the rest of the range, AlcoSenseTM ONE shows your level of intoxication in % BAC (percent of blood alcohol content). It shows your reading in increments of 0.01.The UK drink drive limit is 0.08%BAC. AlcoSense ONE reads up to 0.12%BAC 1.5 times the UK Limit - above this level it will continue to show 0.12%BAC.
If you would like your AlcoSense to automatically warn you not to drive if you are near to or over the limit, give more detailed readings or read in mg/l please consider the Lite or Elite.
New ZEROTM Technology
The AlcoSense ONE features new ZEROTM technology to make sure the unit always reads at it's best. ZEROTM technology is best explained by comparing it to zero-ing a set of scales. Using fresh air the user can regularly zero the unit. This almost elimates `sensor drift', where the sensor drifts out of calibration after a short period of use - a prolific problem amongst many rival entry-level breathalysers.
Sleek Design
It's high gloss black design can discretely be kept anywhere. AlcoSenseTM ONE measures only 19mm x 30mm x 16.5mm and weighs only 66 grams including batteries. It is powered by 2 x AAA batteries meaning that you can use it anywhere at any time.
Use it Again & Again
AlcoSenseTM ONE can be used again and again. For the most accurate results we recommend waiting one hour between tests. If you wish to do multiple tests in a short time we recommend considering the AlcoSense Lite or Elite for their sensor clean and purge features
Highest Levels of Quality
AlcoSenseTM ONE is the lowest priced product EVER to meet and EXCEED the US Dept of Transport accuracy tests (there is no UK standard). Every AlcoSense unit is tested for accuracy three times before leaving our factory. As a result our quality control is arguably the best in the industry meaning you can have 100% faith in our products. AlcoSenseTM ONE has industry leading accuracy of +/-0.02%BAC which is unique in this price range.
Why Delay?
Part of the responsible enjoyment of alcohol is to understand its effect on the body and to understand when you are safe to drive. AlcoSenseTM helps people do exactly that and takes out the potentially fatal guess work the morning after. Don't leave it to chance.
AlcoSense Model Comparison Chart
Accuracy Reading Detail Unit of Measure Recovery time between tests Sensor Type Don't Drive Alert Sensor Purge After Test Can't Get it Wrong Technology Auto Sensor Clean after Blow Test Suggested Retail Price
AlcoSense One AlcoSense Lite AlcoSense Elite
+/-0.2BAC +/-0.2BAC +/-0.2BAC
1 Decimal Place 1 Decimal Place 2 Decimal Places
BAC
BAC
BAC or mg/l
1 minute
30 Seconds
20 Seconds
MEMS
Type 2
Type 1 Max
No
Yes
Yes
No
No
Yes
No
No
Yes
No
No
Yes
£24.99 (29.99) £34.99 (49.99) £59.99 (79.99)
Microsoft Office Word 2007 Microsoft Office Word 2007