JST B02B-XAKK-1(LF)(SN) | IBS Electronics
XA CONNECTOR
Emboss Tape
2.5mm pitch/Disconnectable Crimp style connectors
Radial Tape
· Secure locking device · Solder crack preventive material · Low insertion force · Insertion guide mechanism · Applicable to automatic board mounting
machine · Polarizing boss
Specifications
· Current rating: 3A AC DC (AWG #22, #20) · Voltage rating: 250V AC DC · Temperature range: -25°C to +85°C
(including temperature rise in applying electrical current) · Contact resistance: Initial value/10m max. After environmental testing/20m max. · Insulation resistance: 1,000M min. · Withstanding voltage: 1,000V AC/minute · Applicable wire: AWG #28 to #20 · Applicable PC board thickness: 1.6mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details.
Standards 0 Recognized E60389
1Certified LR20812 2 R9851220
PC board layout (viewed from component side) and Assembly layout
Through-hole type
Top entry type without a boss
with a boss
Side entry type
%
NJO
NJO
±
±
SMT type Top entry type
Dimension D: Refer to the Model No. chart of header side entry type.
"
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
1
XA CONNECTOR
Contact
$POUBDU
Crimping machine $SJNQBQQMJDBUPS
"QQMJDBUPS %JFT
$SJNQBQQMJDBUPSXJUIEJFT
SXA-001T-P0.6 "1,/
SXA-001T-P0.6L
.,4.,44$
.,4.,44$
.,49". "1-.,49". 4$49". "1-4$49". .,49"- "1-.,49"4$49"- "1-4$49"-
Housing
Standard type
#
"
Circuit No.1
Retainer mountable type
#
"
Circuit No.1
Model No.
SXA-001T-P0.6 SXA-01T-P0.6 SXA-001T-P0.6L
mm2
Applicable wire Q'ty / reel
AWG# Insulation O.D. (mm)
Material and Finish
Phosphor bronze, tin-plated (reflow treatment)
RoHS compliance Note :1. SXA-001T-P0.6L is low-insertion force type contact, for easier
insertion/withdrawal, which would be less resistant to the vibration. The crimp height is different from the standard contact. Note :2. Contact JST for gold-plated products.
$POUBDU
Crimping machine $SJNQBQQMJDBUPS
"QQMJDBUPS %JFT
$SJNQBQQMJDBUPSXJUIEJFT
SXA-01T-P0.6 "1,/
.,4.,44$
.,49". "1-.,49". 4$49". "1-4$49".
Note: *Strip-crimp applicator
Circuits
Model No.
Standard
Retainer
type
mountable type
XAP-02V-1 XAP-03V-1 XAP-04V-1 XAP-05V-1 XAP-06V-1 XAP-07V-1 XAP-08V-1 XAP-09V-1 XAP-10V-1 XAP-11V-1 XAP-12V-1 XAP-13V-1 XAP-14V-1 XAP-15V-1
XAP-20V-1
XARP-02V XARP-03V XARP-04V XARP-05V XARP-06V XARP-07V XARP-08V XARP-09V XARP-10V XARP-11V XARP-12V XARP-13V XARP-14V XARP-15V XARP-18V
Dimensions (mm)
A
B
Q'ty / bag
Standard Retainer type mountable type
Material
PA 66, UL94V-0, natural (white)
RoHS compliance <For reference> As the color identification,
the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST.
<Standard type>
ex. XAP-02V-1-oo(blank)...natural (white) K...black R...red E...blue Y...yellow L...lemon yellow M...green O...orange N...brown H...gray P...purple LE...light blue PK...pink FY...vivid yellow Z...ivory
<Retainer mountable type>
ex. XARP-02V-oo (blank)...natural (white) K...black R...red E...blue L...lemon yellow
2
Retainer
A
2.5
0.95
2.5
7.8
Material Glass-filled PA 66, UL94V-0, natural (ivory) RoHS compliance
Through-hole type shrouded header
Top entry type without a boss
#
Circuit No.1
"
Top entry type with a boss
# Circuit No.1
"
Side entry type with a hook
# Circuit No.1
) +45
Circuit
No.1 Mark
"
XA CONNECTOR
Circuits 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Model No. XMS-02V XMS-03V XMS-04V XMS-05V XMS-06V XMS-07V XMS-08V XMS-09V XMS-10V XMS-11V XMS-12V XMS-13V XMS-14V XMS-15V
A
Q'ty / bag
2.5
1,000
5.0
1,000
7.5
1,000
10.0
1,000
12.5
1,000
15.0
1,000
17.5
1,000
20.0
1,000
22.5
1,000
25.0
1,000
27.5
1,000
30.0
1,000
32.5
1,000
35.0
1,000
Circuits
Model No. Top entry type
Without a boss B02B-XASK-1
With a boss B02B-XASK-1-A
B03B-XASK-1 B03B-XASK-1-A
B04B-XASK-1 B04B-XASK-1-A
B05B-XASK-1 B05B-XASK-1-A
B06B-XASK-1 B06B-XASK-1-A
B07B-XASK-1 B07B-XASK-1-A
B08B-XASK-1 B08B-XASK-1-A
B09B-XASK-1 B09B-XASK-1-A
B10B-XASK-1 B10B-XASK-1-A
B11B-XASK-1 B11B-XASK-1-A
B12B-XASK-1 B12B-XASK-1-A
B13B-XASK-1 B13B-XASK-1-A
B14B-XASK-1 B14B-XASK-1-A
B15B-XASK-1 B15B-XASK-1-A
B20B-XASK-1 B20B-XASK-1-A
Dimensions (mm)
"
#
Q'ty / box
Material and Finish Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory)
RoHS compliance This product displays (LF)(SN) on a label. Note: Contact JST for gold-plated products.
Circuits
Model No. Side entry type with a hook
S02B-XASS-1 S03B-XASK-1 S04B-XASK-1 S05B-XASK-1 S06B-XASK-1 S07B-XASK-1 S08B-XASK-1 S09B-XASK-1 S10B-XASK-1 S11B-XASK-1 S12B-XASK-1 S13B-XASK-1 S14B-XASK-1
Dimensions (mm)
"
#
%
Q'ty / box
Material and Finish Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory)
RoHS compliance This product displays (LF)(SN) on a label. Note: 1. Dimension D...See PC board layout.
2. Contact JST for gold-plated products.
<For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST.
ex. S02B-XASK-1S...natural (ivory) K...black R...red E...blue M...green Y...yellow
3
XA CONNECTOR
Through-hole type shrouded header
N type Top entry type without a boss
#
Circuit No.1
"
Top entry type with a boss
# Circuit No.1
"
Side entry type without a hook
# Circuit No.1
) +45
Circuit No.1 Mark
"
Circuits
Model No.
Top entry type
Without a boss
With a boss
B02B-XASK-1N B02B-XASK-1N-A
B03B-XASK-1N B03B-XASK-1N-A
B04B-XASK-1N B04B-XASK-1N-A
B05B-XASK-1N B05B-XASK-1N-A
B06B-XASK-1N B06B-XASK-1N-A
B07B-XASK-1N B07B-XASK-1N-A
B08B-XASK-1N B08B-XASK-1N-A
B09B-XASK-1N B09B-XASK-1N-A
B10B-XASK-1N B10B-XASK-1N-A
B11B-XASK-1N B11B-XASK-1N-A
B12B-XASK-1N B12B-XASK-1N-A
B13B-XASK-1N B13B-XASK-1N-A
B14B-XASK-1N B14B-XASK-1N-A
B15B-XASK-1N B15B-XASK-1N-A
B18B-XASK-1N
Dimensions (mm)
"
#
Q'ty / box
Material and Finish
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (white)
RoHS compliance This product displays (LF)(SN) on a label. Note: Not TÜV approved.
<For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST.
ex. B02B-XASK-1N-AS...natural (white) K...black R...red E...blue Y...yellow L...lemon yellow M...green O...orange N...brown H...gray P...purple LE...light blue PK...pink FY...vivid yellow
Circuits
Model No. Side entry type without a hook
S02B-XASS-1N-BN S03B-XASS-1N-BN S04B-XASS-1N-BN S05B-XASS-1N-BN S06B-XASS-1N-BN S07B-XASS-1N-BN S08B-XASS-1N-BN S09B-XASS-1N-BN S10B-XASS-1N-BN S11B-XASS-1N-BN S12B-XASS-1N-BN S13B-XASS-1N-BN S14B-XASS-1N-BN
Dimensions (mm)
"
#
Q'ty / box
Material and Finish
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (white)
RoHS compliance This product displays (LF)(SN) on a label. Note: 1. As for side entry type, we recommend to use a product with a boss
(hook) because stress is applied directly to fillet part when handling the wire. When using the side entry type product without a boss (hook), please handle the wire with care. 2. Not TÜV approved.
4
XA CONNECTOR
SMT type shrouded header
(2 circuits)
Circuit
#
No.1
"
(3 to 15 circuits)
# "
Circuit No.1
Circuits
Model No. Top entry type BM02B-XASS-TF BM03B-XASS-TF BM04B-XASS-TF BM05B-XASS-TF BM06B-XASS-TF BM07B-XASS-TF BM08B-XASS-TF BM09B-XASS-TF BM12B-XASS-TF BM13B-XASS-TF BM15B-XASS-TF
Dimensions (mm)
"
#
Q'ty / reel
Material and Finish
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA, UL94V-0, natural Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
RoHS compliance This product displays (LF)(SN) on a label.
<For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST.
ex. BM02B-XASS-TFS...natural K...black R...red E...blue M...green D...orange L...lemon yellow
Through-hole type shrouded header on radial-tape
Top entry type without a boss
# "
Circuit
No.1
Model No. Circuits
Top entry type without a boss Top entry type with a boss
B02B-XASS-1-T
B03B-XASS-1-T B03B-XASS-1-A-T
B04B-XASS-1-T B04B-XASS-1-A-T
B05B-XASS-1-T B05B-XASS-1-A-T
B06B-XASS-1-T B06B-XASS-1-A-T
B07B-XASS-1-T B07B-XASS-1-A-T
B08B-XASS-1-T B08B-XASS-1-A-T
Dimensions (mm)
Q'ty / box
"
#
Material and Finish Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory)
RoHS compliance This product displays (LF)(SN) on a label.
<For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST.
ex. B03B-XASS-1-A-TS...natural (ivory) R...red E...blue M...green
Top entry type
Taping specifications
with a boss
#
Circuit
"
No.1
Note: Conforms to JIC C 0806 of "Tape packaging of components with unidirectional leads on continuous tapes".
5
XA CONNECTOR
Packaging specifications
D
H
TERMINALS & CONNECTORS
R
W
Distance between the end of the tape and the first connector's center line (either end)
5BJMUBQF
-FBEFSUBQF
Package type
Distance between folds
Box size
%JTUBODFCFUXFFOUIFFOEPGUIFUBQFBOE UIFGJSTUDPOOFDUPS'TDFOUFSMJOF FJUIFSFOE
Quantity
2, 3 circuits 48 circuits
Flat pack (zigzag folded) 24 indexing holes per fold (304.8mm)
316()45()330()mm
19.05mm
1,000 pcs. / box 500 pcs. / box
Note: Products of different packaging specifications are also available. Contact JST for details.
6
Adobe Acrobat 8.2 Combine Files Adobe Acrobat 8.2