Manuals+

6.5KW HYBRID SOLAR INVERTER CONFIGURATION INSTRUCTION

⚠️ DISCLAIMER

It is required to read through the instructions below in conjunction with the manual before installing the inverter(s). Any resulting damages or irreversible fault codes such as F09 from improper installation will not be covered by warranty.

SPLIT-PHASE CONFIGURATION

  1. Connect all inverter's power cables to the same battery bank. Make sure inverters are turned off. Ensure AC wires are not connected to guarantee no AC is being fed into the inverters during configuration.
  2. Connect the parallel communication cables along with the current sharing cables if applicable. Make sure to verify on Appendix I of the manual to confirm correct cable placements depending on your specific configuration.
  3. Turn on a single inverter, other inverters should be off.
  4. Navigate to program 28 first (since you don't want to make the inverter go on standby first, or else you won't have enough time to go all the way to program 28 and change the setting).
  5. Change the setting on program 28 to 2P1/2P2 180, and make sure to press the enter button to save. Afterwards, press the top left button (circular arrow) to go back to the main menu to confirm the text "2P1 or 2P2" on the top left of the screen. Wait for automatic inverter shutdown before proceeding with next inverter.
  6. Turn on the other inverter and repeat steps 4 and 5.
  7. Turn on all inverters in sequence, 2P1 inverter first then 2P2 inverter.
  8. Once there are no fault codes, turn on the inverters and finish up the remaining connections.

PARALLEL CONFIGURATION

  1. Connect all inverter's power cables to the same battery bank. Make sure inverters are turned off. Ensure AC wires are not connected to guarantee no AC is being fed into the inverters during configuration.
  2. Connect the parallel communication cables along with the current sharing cables if applicable. Make sure to verify on Appendix I of the manual to confirm correct cable placements depending on your specific configuration.
  3. Turn on a single inverter, other inverters should be off.
  4. Navigate to program 28 first (since you don't want to make the inverter go on standby first, or else you won't have enough time to go all the way to program 28 and change the setting) and put the inverter on standby mode by pressing the gray power button (button should be pushed out). Keep in mind, you will have 30 seconds to change the program before the inverter automatically shuts down. Program 28 will not be able to change if the inverter is not on standby mode.
  5. Change the setting on program 28 to “PAL", and make sure to press the enter button to save. Afterwards, press the top left button (circular arrow) to go back to the main menu. Wait for automatic inverter shutdown before proceeding with the next inverter.
  6. Turn on the other inverter and repeat steps 4 and 5.
  7. Turn on all inverters in the order they were programmed, starting with the first inverter configured and proceeding sequentially to the last.
  8. If successful, you will see the text “HS” for the master unit or “SL” for the slave unit on the top left of the inverter's display on the main menu.
Models: 6.5KW_Hybrid_Solar_Inverter, 6.5KW Hybrid Solar Inverter, 6.5KW, Hybrid Solar Inverter, Solar Inverter, Inverter

File Info : application/pdf, 2 Pages, 3.11MB

PDF preview unavailable. Download the PDF instead.

6.5KW Hybrid Solar Inverter Configuration Instruction V2

References

Adobe PDF library 17.00

Related Documents

PreviewExpertPower 10KW Hybrid Solar Inverter Specifications
Detailed specifications for the ExpertPower 10KW Hybrid Solar Inverter (Model IVV48V10KW), covering grid-tie and off-grid operation, AC/DC inputs, battery charging, physical dimensions, environmental operating conditions, and protection certifications.
PreviewExpertPower IVOCH2KW/IVOCH3KW 12V Pure Sine Wave Inverter Charger User Manual
Comprehensive user manual for ExpertPower's IVOCH2KW and IVOCH3KW 12V Pure Sine Wave Inverter Chargers. Covers installation, operation, AC/DC modes, wiring, safety, and troubleshooting for RVs and solar power systems.
PreviewExpertPower SPLRM100 Monocrystalline Solar Panel Manual
This manual provides detailed specifications, connection instructions, and safety warnings for the ExpertPower SPLRM100 Monocrystalline Solar Panel.
PreviewEXPERTPOWER EPC125 12V 5A LiFePO4 Smart Battery Charger: User Guide & Safety Instructions
Learn how to safely and effectively use the EXPERTPOWER EPC125 12V 5A LiFePO4 Smart Battery Charger. This guide provides essential safety instructions, operating procedures, specifications, and troubleshooting tips for optimal battery charging.
PreviewExpertPower 24V 20A LiFePO4 Smart Charger Manual and Safety Instructions
Comprehensive guide to connecting, operating, and maintaining the ExpertPower 24V 20A LiFePO4 Smart Charger. Includes safety warnings, specifications, and troubleshooting tips.
PreviewEXPERTPOWER EP48100 PBMS Tools Connection and Monitoring Guide
Instructions for connecting and monitoring the EXPERTPOWER EP48100 battery system using the PBMS Tools software, including hardware setup and software configuration.
PreviewExpertPower Lithium Battery Warranty Information and Terms
Detailed warranty terms and conditions for ExpertPower's lithium battery product line, including warranty periods, return policies, RMA guidelines, and exclusions.
PreviewExpertPower EXP1270 12V 7Ah Battery Technical Specifications and Performance Data
Detailed technical specifications, discharge characteristics, charge curves, and performance data for the ExpertPower EXP1270 12V 7Ah VRLA battery. Includes dimensions, capacity, life expectancy, and temperature effects.