Juniper NETWORKS Onboard SRX Series Firewalls to Security Director Cloud User Guide

User Guide for Juniper NETWORKS models including: SRX1600, Onboard SRX Series Firewalls to Security Director Cloud, Series Firewalls to Security Director Cloud, Firewalls to Security Director Cloud, Security Director Cloud, Director Cloud, SRX2300

Onboard SRX Series Firewalls to Security Director Cloud

7 hours ago — Quick Start. Onboard SRX Series Firewalls to ... This guide walks you through the simple steps to ... For instructions specific to your device, see the applicable ...

File Info : application/pdf, 13 Pages, 684.61KB

sd-cloud-quick-start

Quick Start
Onboard SRX Series Firewalls to Security Director Cloud
IN THIS GUIDE Step 1: Begin | 1 Step 2: Up and Running | 10 Step 3: Keep Going | 12
Step 1: Begin
IN THIS SECTION Greenfield Onboarding: Add Cloud-Ready SRX Series Firewalls to Juniper Security Director Cloud Using QR Code | 3 Brownfield Onboarding: Add SRX Series Firewalls to Juniper Security Director Cloud Using Commands | 7
This guide walks you through the simple steps to onboard Juniper Networks® SRX Series Firewalls to the Juniper® Security Director Cloud. You can onboard SRX Series Firewalls to Juniper Security Director Cloud using the following options: · Greenfield onboarding: Onboard new cloud-ready SRX Series Firewalls. · Brownfield onboarding: Onboard existing, in-service SRX Series Firewalls.

2 Figure 1: Onboard SRX Series Firewalls to Juniper Security Director Cloud
NOTE: You can also onboard SRX Series Firewalls using the following methods: · To onboard SRX Series Firewalls to Juniper Security Director Cloud using ZTP, see Add Devices Using Zero
Touch Provisioning. · To onboard (adopt) existing, in-service (brownfield), SRX Series Firewalls into Juniper Security Director Cloud
using JWeb, see Add SRX Series Firewalls to Juniper Security Director Cloud Using JWeb. · To onboard (adopt) existing, in-service (brownfield), SRX Series Firewalls into Juniper Security Director Cloud
using Security Director on-prem, see Add Devices to Juniper Security Director Cloud. · To onboard cloud-ready SRX Series Firewalls using Mist, see Cloud-Ready SRX Firewalls with Mist. · To onboard (adopt) existing, in-service (brownfield), SRX Series Firewalls into Mist, see SRX Adoption.

3
Greenfield Onboarding: Add Cloud-Ready SRX Series Firewalls to Juniper Security Director Cloud Using QR Code

Your firewall is cloud-ready if it has a QR claim code on the front or back panel. You can onboard one or more cloudready SRX Series Firewalls using your mobile phone. Before You Begin Install the rack and power on your cloud-ready SRX Series Firewall. For instructions specific to your device, see the applicable hardware guide.
Table 1: Juniper Security Director Cloud Supported Cloud-Ready SRX Series Firewalls and Related Documentation

Firewall

Install and Maintain Hardware

SRX1600

SRX1600 Firewall Hardware Guide

SRX2300

SRX2300 Firewall Hardware Guide

NOTE: All interfaces on cloud-ready SRX Series Firewalls are DHCP enabled in the factory-default configuration. Make sure that you can connect to the internet using one of the interfaces.
1. Decide which Juniper Security Director Cloud Subscriptions you need and contact your sales representative or account manager to purchase subscriptions.
2. Go to https://sdcloud.juniperclouds.net/ and click Create an organization account. Follow the on-screen instructions to activate your account. It takes up to 7 working days to approve your account.

4 3. Log in to the Juniper Security Director Cloud portal, click Add Subscriptions, enter details, and click OK
View your added subscriptions from Subscriptions>SRX Management Subscriptions. If you do not see your subscriptions, go to Administration > Jobs page to view the status. 4. Use your mobile phone to scan the QR code on the cloud-ready SRX Series Firewall. Click the displayed link and select Claim to SD Cloud to go to Juniper Security Director Cloud login page.

5 5. Read the prerequisites, enter your e-mail address, and click Next.
6. Follow the on-screen instructions to sign in.

6 7. Select the organization to add your device, enter the root password, and click Add Device.
Congratulations! You've successfully registered your device to the organization and added your device to Juniper Security Director Cloud.
8. Power on you cloud-ready SRX Series Firewall and log in to Juniper Security Director Cloud portal using your laptop or desktop. View the newly added device on the SRX > Device Management > Devices page.

7
NOTE: Device discovery takes a few seconds to complete. After successful device discovery, you can see the following status updates: · Management Status: Up · Inventory Status: In Sync · Device Config Status: In Sync Congratulations! You've successfully onboarded your cloud-ready SRX Series Firewall. You're now ready to associate devices to your Juniper Security Director Cloud subscription. To continue, proceed to "Step 2: Up and Running" on page 10 .
Brownfield Onboarding: Add SRX Series Firewalls to Juniper Security Director Cloud Using Commands
Before You Begin · Make sure SRX Series Firewall can communicate with Juniper Security Director Cloud fully qualified domain name
(FQDN) on respective ports. The FQDN of each home region is different. See the following table for FQDN mapping details.

8 Table 2: Home Region to FQDN Mapping

Home Region Purpose

Port

North Virginia

ZTP

443

Outbound SSH 7804

System Log messages over TLS

6514

FQDN
jsec-virginia.juniperclouds.net srx.sdcloud.juniperclouds.net srx.sdcloud.juniperclouds.net

Ohio

ZTP

443

Outbound SSH 7804

System log messages over TLS

6514

jsec-ohio.juniperclouds.net srx.jsec-ohio.juniperclouds.net srx.jsec-ohio.juniperclouds.net

· Use TCP port 53 and UDP port 53 to connect to Google DNS servers (IP addresses--8.8.8.8 and 8.8.4.4). The Google DNS servers are specified as the default servers in the factory settings of the SRX Series Firewalls. You must use these default DNS servers when you use ZTP to onboard the firewalls. You can use private DNS servers when you use other methods to onboard the firewalls. Note that you must make sure that the private DNS servers can resolve the Juniper Security Director Cloud FQDNs.
1. Decide which Juniper Security Director Cloud Subscriptions you need and contact your sales representative or account manager to purchase subscriptions.
2. Go to https://sdcloud.juniperclouds.net/ and click Create an organization account. Follow the on-screen instructions to activate your account. It takes up to 7 working days to approve your account activation request.

9 3. Log in to the Juniper Security Director Cloud portal, click Add Subscriptions, enter details, and click OK
View your added subscriptions from Subscriptions>SRX Management Subscriptions. If you do not see your subscriptions, go to Administration > Jobs page to view the status. 4. Go to Juniper Security Director Cloud, go to SRX > Device Management > Devices, and click the + icon to add your devices. 5. Click Adopt SRX Devices and select SRX Devices to add devices or select SRX Clusters to add device clusters.
Follow the on-screen instructions to continue.

10 6. Copy and paste the commands from the devices page to the SRX Series Firewall or the primary cluster device
console, and commit the changes.
It will take few seconds for the device discovery. After device discovery is successful, verify the following fields on the Devices page: · Management Status changes from Discovery in progress to Up. · Inventory Status and Device Config Status changes from Out of Sync to In Sync.
NOTE: In case of discovery failure, go to Administration > Jobs page to view the status. You're ready to associate devices to your Juniper Security Director Cloud subscription. To continue, proceed to "Step 2: Up and Running" on page 10 .
Step 2: Up and Running
IN THIS SECTION Associate Devices with Your Juniper Security Director Cloud Subscription | 11

11
Associate Devices with Your Juniper Security Director Cloud Subscription
1. Go to SRX >Device Management >Devices, click Manage Subscriptions and follow the on-screen instructions.
2. Verify the subscription from Administration > Subscriptions > SRX Management Subscriptions. The subscription status changes to .
Congratulations! You have successfully added devices to Juniper Security Director Cloud!

12
Step 3: Keep Going
IN THIS SECTION What's Next? | 12 General Information | 12 Learn With Videos | 13

What's Next?

If You Want To

Then

Create or import a security policy, add a rule to the security policy, and deploy the security policy on the devices

See About the SRX Policy Page

Set up the Content Security profiles to secure your network from multiple security threat types

See About the Content Security Profiles Page

Configure ATP Cloud to protect all hosts in your network against evolving security threats

See File Inspection Profiles Overview

View the traffic logs and network events including viruses found, interfaces that are See About the Session Page and About the

down, number of attacks, CPU spikes, system reboots, and sessions

All Security Events Page

General Information
If You Want To See all the available documentation for Juniper Security Director Cloud

Then Visit Security Director Cloud

13
Learn With Videos

If You Want To

Then

Learn more about Juniper Security Director Cloud

Watch What is Juniper Security Director Cloud?

See a demonstration of how to get started with a Juniper Security Director Cloud account

Watch Getting Started with Juniper Security Director Cloud Account

Learn how to manage security with Juniper Security Director Cloud and Juniper Secure Edge

Watch Manage Security Anywhere With Security Director Cloud and Juniper Secure Edge

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Copyright © 2024 Juniper Networks, Inc. All rights reserved.

References

AH XSL Formatter V6.6 MR1 for Windows (x64) : 6.6.2.35616 (2018/10/15 18:42JST) Antenna House PDF Output Library 6.6.1317 (Windows (x64))