| Used With | DILM150-XHI(V), DILM1000-XHI(V) |
|---|
| Amperage Rating | 170A |
|---|
| Number of Poles | Three-pole |
|---|
| Type | Full voltage non-reversing medium contactor |
|---|
| Voltage Rating | 400 V |
|---|
| 10.10 Temperature Rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
|---|
| 10.11 Short-Circuit Rating | Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
|---|
| 10.12 Electromagnetic Compatibility | Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
|---|
| 10.13 Mechanical Function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
|---|
| 10.2.2 Corrosion Resistance | Meets the product standard's requirements. |
|---|
| 10.2.3.1 Verification of Thermal Stability of Enclosures | Meets the product standard's requirements. |
|---|
| 10.2.3.2 Verification of Resistance of Insulating Materials to Normal Heat | Meets the product standard's requirements. |
|---|
| 10.2.3.3 Resist. of Insul. Mat. to Abnormal Heat/Fire by Internal Elect. Effects | Meets the product standard's requirements. |
|---|
| 10.2.4 Resistance to Ultra-Violet (UV) Radiation | Meets the product standard's requirements. |
|---|
| 10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. |
|---|
| 10.2.6 Mechanical Impact | Does not apply, since the entire switchgear needs to be evaluated. |
|---|
| 10.2.7 Inscriptions | Meets the product standard's requirements. |
|---|
| 10.3 Degree of Protection of Assemblies | Does not apply, since the entire switchgear needs to be evaluated. |
|---|
| 10.4 Clearances and Creepage Distances | Meets the product standard's requirements. |
|---|
| 10.5 Protection Against Electric Shock | Does not apply, since the entire switchgear needs to be evaluated. |
|---|
| 10.6 Incorporation of Switching Devices and Components | Does not apply, since the entire switchgear needs to be evaluated. |
|---|
| 10.7 Internal Electrical Circuits and Connections | Is the panel builder's responsibility. |
|---|
| 10.8 Connections for External Conductors | Is the panel builder's responsibility. |
|---|
| 10.9.2 Power-Frequency Electric Strength | Is the panel builder's responsibility. |
|---|
| 10.9.3 Impulse Withstand Voltage | Is the panel builder's responsibility. |
|---|
| 10.9.4 Testing of Enclosures Made of Insulating Material | Is the panel builder's responsibility. |
|---|
| Frequency Rating | 50-60 Hz |
|---|
| Operating Frequency | 3600 mechanical Operations/h (AC operated) |
|---|
| Pollution Degree | 3 |
|---|
| Climatic Proofing | Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclic, to IEC 60068-2-30 |
|---|
| Connection to SmartWire-DT | No |
|---|
| Rated Impulse Withstand Voltage (UIMP) | 8000 V AC |
|---|
| Utilization Category | AC-3: Normal AC induction motors: starting, switch off during running; AC-4: Normal AC induction motors: starting, plugging, reversing, inching; AC-1: Non-inductive or slightly inductive loads, resistance furnaces |
|---|
| Connection Type of Main Circuit | 2, Terminal screw, Control circuit cables, Pozidriv screwdriver; 0.8 x 5.5/1 x 6 mm, Terminal screw, Control circuit cables, Standard screwdriver |
|---|
| Screwdriver Size | 2, Terminal screw, Control circuit cables, Pozidriv screwdriver; 0.8 x 5.5/1 x 6 mm, Terminal screw, Control circuit cables, Standard screwdriver |
|---|
| Voltage Type | AC |
|---|
| Degree of Protection | IP00 |
|---|
| Number of Auxiliary Contacts (Normally Closed Contacts) | 0 |
|---|
| Number of Auxiliary Contacts (Normally Open Contacts) | 0 |
|---|
| Number of Contacts (Normally Closed) as Main Contact | 0 |
|---|
| Number of Main Contacts (Normally Open Contact) | 3 |
|---|
| Operating Temperature - Max | 60 °C |
|---|
| Operating Temperature - Min | -25 °C |
|---|
| Rated Breaking Capacity at 220/230 V | 800 A |
|---|
| Rated Breaking Capacity at 380/400 V | 800 A |
|---|
| Rated Breaking Capacity at 500 V | 800 A |
|---|
| Rated Breaking Capacity at 660/690 V | 650 A |
|---|
| Rated Control Supply Voltage (US) at AC, 50 Hz - Max | 380 V |
|---|
| Rated Control Supply Voltage (US) at AC, 50 Hz - Min | 380 V |
|---|
| Rated Control Supply Voltage (US) at AC, 60 Hz - Max | 440 V |
|---|
| Rated Control Supply Voltage (US) at AC, 60 Hz - Min | 440 V |
|---|
| Coil Voltage | 380-440 Vac, 50/60 Hz |
|---|
| Continuous Ampere Rating | 80 A |
|---|
| Drop-out Voltage | AC operated: 0.6 - 0.3 x UC, AC operated |
|---|
| Overvoltage Category | III |
|---|
| Duty Factor | 100% |
|---|
| Emitted Interference Operation | According to EN 60947-1 |
|---|
| Interference Immunity | Non-reversing |
|---|
| Lifespan, Mechanical | According to EN 60947-1 |
|---|
| Pick-up Voltage | 10,000,000 Operations (AC operated) |
|---|
| Power Consumption, Pick-up, 50 Hz | 0.8 - 1.1 V AC x Uc |
|---|
| Safe Isolation | 310 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz |
|---|
| Power Consumption, Pick-up, 60 Hz | 690 V AC, Between coil and contacts, According to EN 61140 |
|---|
| Residual Current | 690 V AC, Between the contacts, According to EN 61140 |
|---|
| Screw Size | 345 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz |
|---|
| Power Consumption, Sealing, 50 Hz | 1 mA (with actuation of A1 - A2 by the electronics with "0" signal) |
|---|
| Power Consumption, Sealing, 60 Hz | 5 mm AF, Hexagon socket-head spanner, Terminal screw, Main cables M10, Terminal screw, Main cables M3.5, Terminal screw, Control circuit cables |
|---|
| Terminal Capacity (Stranded) | 26 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz |
|---|
| Terminal Capacity (Copper Band) | 5.8 W, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz |
|---|
| Terminal Capacity (Flexible with Ferrule) | 30 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz |
|---|
| Shock Resistance | 5.8 W, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz |
|---|
| Terminal Capacity (Solid) | 1 x (16 - 70) mm², Main cables; 2 x (16 - 50) mm², Main cables; 2 x (6 x 16 x 0.8) mm (Number of segments x width x thickness), Main cables |
|---|
| Terminal Capacity (Solid/Stranded AWG) | 1 x (0.75 - 2.5) mm², Control circuit cables; 2 x (0.75 - 2.5) mm², Control circuit cables; 1 x (10 - 70) mm², Main cables; 2 x (10 - 50) mm², Main cables |
|---|
| Power Consumption | 7 g, N/O auxiliary contact, Mechanical, according to IEC/EN 60068-2-27 when tabletop-mounted, Half-sinusoidal shock 10 ms; 5 g, N/C auxiliary contact, Mechanical, according to IEC/EN 60068-2-27 when tabletop-mounted, Half-sinusoidal shock 10 ms; 10 g, N/O main contact, Mechanical, according to IEC/EN 60068-2-27 when tabletop-mounted, Half-sinusoidal shock 10 ms; 10 g, N/O main contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms; 7 g, N/O auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms; 5 g, N/C auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms |
|---|
| Tightening Torque | 2 x (0.75 - 2.5) mm², Control circuit cables; 1 x (0.75 - 4) mm², Control circuit cables; 18 - 14, Control circuit cables; Single 8...3/0, double 8...2/0, Main cables |
|---|
| Rated Control Supply Voltage (US) at DC - Max | 37 kW |
|---|
| Rated Control Supply Voltage (US) at DC - Min | 1.2 Nm, Screw terminals, Control circuit cables; 14 Nm, Screw terminals, Main cables |
|---|
| Rated Insulation Voltage (UI) | 0 V |
|---|
| Rated Making Capacity up to 690 V (cos phi to IEC/EN 60947) | 0 V |
|---|
| Rated Operational Current (IE) at AC-1, 380 V, 400 V, 415 V | 690 V |
|---|
| Rated Operational Current (IE) at AC-3, 220 V, 230 V, 240 V | 1120 A |
|---|
| Rated Operational Current (IE) at AC-3, 380 V, 400 V, 415 V | 110 A |
|---|
| Rated Operational Current (IE) at AC-3, 440 V | 80 A |
|---|
| Rated Operational Current (IE) at AC-3, 500 V | 80 A |
|---|
| Rated Operational Current (IE) at AC-3, 660 V, 690 V | 80 A |
|---|
| Rated Operational Current (IE) at AC-4, 220 V, 230 V, 240 V | 80 A |
|---|
| Rated Operational Current (IE) at AC-4, 400 V | 65 A |
|---|
| Rated Operational Current (IE) at AC-4, 440 V | 40 A |
|---|
| Rated Operational Current (IE) at AC-4, 500 V | 40 A |
|---|
| Rated Operational Current (IE) at AC-4, 660 V, 690 V | 40 A |
|---|
| Rated Operational Current (IE) at DC-1, 110 V | 40 A |
|---|
| Rated Operational Current (IE) at DC-1, 220 V | 27 A |
|---|
| Rated Operational Current (IE) at DC-1, 60 V | 110 A |
|---|
| Rated Operational Current for Specified Heat Dissipation (In) | 70 A |
|---|
| Rated Operational Power at AC-3, 240 V, 50 Hz | 110 A |
|---|
| Rated Operational Power at AC-3, 380/400 V, 50 Hz | 80 A |
|---|
| Rated Operational Power at AC-3, 415 V, 50 Hz | 27.5 kW |
|---|
| Rated Operational Power at AC-4, 220/230 V, 50 Hz | 37 kW |
|---|
| Rated Operational Power at AC-4, 240 V, 50 Hz | 48 kW |
|---|
| Rated Operational Power at AC-4, 380/400 V, 50 Hz | 11.5 kW |
|---|
| Rated Operational Power at AC-4, 415 V, 50 Hz | 13 kW |
|---|
| Rated Operational Power at AC-4, 440 V, 50 Hz | 20 kW |
|---|
| Rated Operational Power at AC-4, 500 V, 50 Hz | 24 kW |
|---|
| Rated Operational Power at AC-4, 660/690 V, 50 Hz | 25 kW |
|---|
| Rated Operational Power (NEMA) | 29 kW |
|---|
| Rated Operational Voltage (UE) at AC - Max | 26 kW |
|---|
| Resistance per Pole | 44.7 kW |
|---|
| Static Heat Dissipation, Non-Current-Dependent PVS | 690 V |
|---|
| Stripping Length (Control Circuit Cable) | 0.6 mΩ |
|---|
| Stripping Length (Main Cable) | 5.8 W |
|---|
| Switching Time (AC Operated, Make Contacts, Closing Delay) - Max | 10 mm |
|---|
| Switching Time (AC Operated, Make Contacts, Closing Delay) - Min | 24 mm |
|---|
| Switching Time (AC Operated, Make Contacts, Opening Delay) - Max | 20 ms |
|---|
| Switching Time (AC Operated, Make Contacts, Opening Delay) - Min | 14 ms |
|---|
| Short-Circuit Current Rating (Basic Rating) | 14 ms |
|---|
| Short-Circuit Current Rating (High Fault at 480 V) | 9 ms |
|---|
| Short-Circuit Current Rating (High Fault at 600 V) | 10 kA, 600 A max. fuse, SCCR (UL/CSA); 10 kA, 600 A max. CB, SCCR (UL/CSA) |
|---|
| Short-Circuit Protection Rating (Type 1 Coordination) at 400 V | 100 kA, 300 A CLASS J max. fuse, SCCR (UL/CSA); 30 kA, 600 A max. fuse, SCCR (UL/CSA) |
|---|
| Suitable For | 100 kA, 300 A CLASS J max. fuse, SCCR (UL/CSA); 30 kA, 600 A max. fuse, SCCR (UL/CSA) |
|---|
| Short-Circuit Protection Rating (Type 1 Coordination) at 690 V | 250 A gG/gL |
|---|
| Short-Circuit Protection Rating (Type 2 Coordination) at 400 V | Also motors with efficiency class IE3 |
|---|
| Short-Circuit Protection Rating (Type 2 Coordination) at 690 V | 200 A gG/gL |
|---|
| Operating Temperature | 160 A gG/gL |
|---|
| Conventional Thermal Current ITH at 40°C (3-Pole, Open) | 160 A gG/gL |
|---|
| Conventional Thermal Current ITH at 50°C (3-Pole, Open) | -25° to 60°C |
|---|
| Conventional Thermal Current ITH at 60°C (3-Pole, Open) | 110 A |
|---|
| Rated Operational Power at AC-3, 440 V, 50 Hz | 98 A |
|---|
| Rated Operational Power at AC-3, 500 V, 50 Hz | 90 A |
|---|
| Rated Operational Power at AC-3, 690 V, 50 Hz | 51 kW |
|---|
| Actuating Voltage | 58 kW |
|---|
| Altitude | 63 kW |
|---|
| Operating Voltage at AC, 50 Hz - Min | 380 V 50 Hz, 440 V 60 Hz |
|---|
| Operating Voltage at AC, 50 Hz - Max | Max. 2000 m |
|---|
| Operating Voltage at AC, 60 Hz - Min | 230 V |
|---|
| Operating Voltage at AC, 60 Hz - Max | 690 V |
|---|
