Rowenta TURBO SILENCE VU/VF545x Stand Fan User Guide

Assembly Instructions

Follow these steps to assemble your stand fan:

Components

• Fan head assembly (includes motor housing and rear grille)
• Fan blade
• Front grille
• Grille securing ring
• Stand pole (upper and lower sections)
• Base
• Remote control

Step-by-Step Assembly

Attaching Grilles and Fan Blade

1. Place the rear grille onto the motor housing, aligning the mounting tabs. Ensure it is seated correctly.

2. Secure the rear grille by twisting the grille securing ring clockwise until it locks firmly in place.

3. Mount the fan blade onto the motor shaft. Align the blade's central hub with the shaft and push it on securely.

4. Position the front grille over the rear grille, aligning the clips or notches.

5. Secure the front grille to the rear grille using the grille securing ring or the designated locking mechanism.

Connecting Fan Head to Stand

1. Attach the assembled fan head unit to the top of the stand pole. This usually involves sliding it onto a mounting point and securing it with a locking mechanism or screw.

Assembling Stand and Base

1. Connect the lower section of the stand pole to the base. This often involves screwing or slotting it into place.

2. Insert the upper section of the stand pole into the lower section and adjust to the desired height, securing it with the provided locking mechanism.

3. Attach the complete stand pole assembly to the fan head unit.

Operation

Your TURBO SILENCE stand fan offers multiple speed settings and a timer function for your comfort.

Powering On and Speed Control

Press the power button to turn the fan ON. The fan will start at the lowest speed setting.

Use the speed selection buttons (indicated by icons representing different speed levels, e.g., x2, x4, x6, x8) to adjust the airflow to your preference.

Press the power button again to turn the fan OFF.

Timer Function

Set the fan to turn off automatically by using the timer function. Press the timer button repeatedly to select the desired operating duration, typically ranging from 1 to 8 hours (indicated by 1-8H).

Remote Control Operation

The included remote control provides convenient operation from a distance. Use its buttons to control power, speed, and timer settings. Ensure the remote is pointed towards the fan's infrared receiver.

AUTO Mode

Select AUTO mode for automatic fan speed adjustment based on ambient conditions (if supported by the model).

Remote Control Battery Replacement

To replace the battery in the remote control:

1. Slide open the battery compartment cover on the back of the remote.
2. Insert one CR2032 battery, ensuring correct polarity (observe the + symbol).
3. Close the battery compartment cover securely.

Safety Precautions

Please read and follow all safety instructions to ensure safe operation and prevent damage.

General Safety Guidelines

• Read all instructions before operating the fan.
• Place the fan on a stable, level surface to prevent tipping.
• Do not operate the fan in wet or damp environments.
• Keep the fan away from heat sources, open flames, and flammable materials.
• Never insert fingers, tools, or any objects into the fan grille while it is plugged in or operating.
• Always unplug the fan from the power outlet when not in use, before cleaning, or before performing any maintenance.
• Do not operate the fan if the power cord or plug is damaged.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.

Specific Warnings

• Do not cover the fan or obstruct airflow.
• Keep the fan away from curtains, drapes, or any items that could be drawn into the rotating blades.
• Ensure the power cord does not come into contact with hot surfaces.
• Avoid continuous operation exceeding 12 hours (indicated by >12H).
• Observe safety symbols: OK (✔️) indicates correct usage, while NO (❌) indicates incorrect usage or potential hazards. Refer to specific diagrams for detailed guidance.