Jasco
Z-Wave Hubs
User Manual for JASCO models including: 43072, GE Enbrighten Z-Wave In-Wall, Smart Switch 120 277V
The controller’s app will indicate if it has discovers the device. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product. Enter the 5-digit code. 14287 In-Wall Smart Fan Control 34172 Portable Wireless Solo Scene Remote 13940 Black Paddle 46199
File Info : application/pdf, 3 Pages, 1.64MB
DocumentDocument43072 PRODUCT SPECIFICATIONS GE Enbrighten Z-Wave In-Wall Smart Switch 120/277V COMMERCIAL GRADE 120/277VAC QUIC KFIT TM SIMPLEWIRETM www.byjasco.com Specifications Power: 120/277VAC, 60Hz Signal frequency: 908.4/916MHz Maximum load: 120VAC: 960W incandescent, 1/2HP motor 1800W (15A resistive) 277VAC: 1385W incandescent, 1/2HP motor 1800W (15A resistive) Range: Up to 150ft. from controller or closest Z-Wave device Operating temperature: 32-104° F (0-40° C) Warranty: 2-year limited product warranty Requires neutral wire. Switch must be mounted indoors Design Features · QuickFitTM Improved components · Uses a standard decora®-Leviton reduce the housing depth by up to wallplate (wallplate not included) 20% compared to previous Z-Wave · Interchangeable paddle -- White & models and eliminated the need for light almond paddle included heat tabs · Blue LED indicator shows switch · SimpleWireTM Auto line-load sensing terminals support fast location or status with four setting options ON when load is OFF, installation by detecting line and load wires and configuring the ON when load is ON, always OFF or always ON switch accordingly · In-line traveler circuit protection · Dual ground ports, which are offset to avoid switch box mounting · Z-Wave Plus certified screws, support daisy-chaining in multi-switch setups Z-Wave Plus with S2 Security · Turn the connected device ON/OFF manually or via Z-Wave hub or controller · Remotely monitor with any mobile device* · Works with Google Assistant and Amazon Alexa (requires compatible hub*) · May be used in single-pole installation or with up to five GE-branded model 46199 Add-on Switches in 3, 4, 5 or 6-way and SmartStart Features · Improved battery life and up to 50% greater wireless range · QR codes with unique, industry-standard secure key exchange to add a layer of 128-bit encryption · Effortless device pairing to Z-Wave S2 and SmartStart certified gateways · Backward compatible with all generations of Z-Wave devices wiring configurations · 250% faster processor · Works with all LED, CFL, incandescent and halogen bulbs · 400% more memory · 50% more energy efficient · Can be included in multiple groups and scenes · Uses the Z-Wave firmware update meta data command class for standardized firmware · Supports wireless upgrades to future-proof your home updates over the air · Supports advanced configuration -- White/light almond LED status, alternate exclusion paddles included · Screw terminal installation -- requires wiring connections for line (hot), load, neutral, and ground. · Traveler wire required for multi-pole installation * Requires Z-Wave hub or controller, functions may vary depending on brand. 43072 PRODUCT SPECIFICATIONS Single-Location Wiring Space-Saving Screw Terminals LOAD GROUND TRAVELER NEUTRAL LINE Multi-Location Wiring Line Switch (Primary Switch) TRAVELER LOAD Out to Light (Load) Load Switch (Add-on Switch) GROUND TRAVELER LOAD JUMPER LOAD GROUND TRAVELER JUMPER LINE From Breaker Box In from Line Switch Installation Recommendations: · Insert wire into port and tighten screw. Do not wrap wire around screw · Indoor installation only · Visit http://www.ezzwave.com/hubs for hub compatibility · Wallplates sold separately · Trilingual instruction manual English, French, Spanish www.byjasco.com 2 43072 PRODUCT SPECIFICATIONS Device Configuration Adding your device to a Z-Wave network Once the hub is ready to add your smart switch, press and the top or bottom of the rocker on the smart switch. To return to factory defaults Quickly press the ON button three times, then press the OFF button three times. The LED will flash ON/ OFF five times when completed. To remove and reset the device Once the controller is ready to remove your device, press the top or bottom of the rocker on the smart switch. Certifications & Compliances S2 + SmartStart install The controller's app will indicate if it has discovers the device. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product. Enter the 5-digit code. Compliances, specifications and availability are subject to change without notice DSK : XXXXX -125651-22671 -26939-47599 -19612-25872 -47752 Distributed by Jasco Products Company LLC 10 E. Memorial Rd., Oklahoma City, OK ©Jasco 2019 Light-Commercial Grade (120/277VAC) Additional Paddle Colors Coming Soon Coming Soon 43073 0-10V Smart Dimmer 43074 43075 120/277V Smart 0-10V Smart Toggle Switch Toggle Dimmer Residential Grade (120VAC Only) 13940 13943 13945 Black Paddle Brown Paddle Ivory Paddle 46199 Add-on Switch 46203 26931 26933 14288 In-Wall In-Wall Smart In-Wall Smart In-Wall Smart Dimmer Motion Switch Motion Dimmer Smart Outlet 14287 In-Wall Smart Fan Control 14289 14299 In-Wall In-Wall 1000W Touch Dimmer Smart Dimmer 46200 Add-on Switch 46201 46202 In-Wall In-Wall Smart Smart Dimmer Switch 46204 In-Wall Smart Dimmer 32563 Smart Door Sensor www.byjasco.com 34172 Portable Wireless Solo Scene Remote 34174 Portable Wireless Duo Scene Remote 34176 Portable Wireless Quad Scene Remote 3