3 English 1.3 PRODUCT OVERVIEW& ILLUSTRATION NO Description FUNCTION 1 Turn on/off meter 2 Power Power indicator light 3 22kHz 22kHz indicator light
USER'S MANUAL English CONTENTS 1. GUIDE...............................................................................................................2 1.1 IMPORTANT SAFETY INSTRUCTIONS...................................................................................2 1.2 UNPACKING...................................................................................................................................2 1.3 PRODUCT OVERVIEW& ILLUSTRATION...............................................................................3 2. OUTLINE...........................................................................................................5 3. THE MENU OSD INSTRUCTION.......................................................................6 3.1 DVB-S2............................................................................................................................................6 3.2 DVB-T2............................................................................................................................................8 3.3 DVB-C............................................................................................................................................10 3.4 LOOP SEARCH.............................................................................................................................10 3.5 ANGLE CALCULATION...............................................................................................................11 3.6 OTHERS..........................................................................................................................................11 3.7 MULTIMEDIA...............................................................................................................................14 3.8 SYSTEM SETTING.......................................................................................................................14 4. TECHNICAL SPECIFICATION.......................................................................... 16 5. TROUBLE SHOOTING..................................................................................... 18 1 1. GUIDE 1.1 IMPORTANT SAFETY INSTRUCTIONS Thank you for choosing our product. Before installation, we would like to remind you some notes, which is very important for operating safely and properly, as follows: · Be sure to read this user manual before starting your operation. · You must install the dish with correct direction and angle. If the dish is not working properly, contact your local dealer. · When the unit is suddenly moved to a hot area from a cold area, it may cause some problems. In that case, turn off the power, and turn on again after 1-2 hours. · Keep meter placed in clean space with sufficient ventilation. · Do not cover the meter with or place it on a unit that emits heat. · Clean the case by a soft cloth with a little washing liquid. · Do not remove the cover. · Do not let the unit exposed to extreme heat, cold or humid conditions. · No liquids or any other materials to come inside of the unit. 1.2 UNPACKING Open the package and make sure it includes all below items, if any missing, please contact the reseller for replacement. 1. Digital Satellite Meter 2. User's manual 3. AV cable 4. Car charger cable 5. Power adaptor 6. Carrying bag 7. DC 12V connect line 8. BNC-Connector NOTE: Please refer to our actual configuration. 2 English 1.3 PRODUCT OVERVIEW& ILLUSTRATION NO Description 1 2 Power 3 22kHz 4 H/V 5 LOCK 6 Charge 7 MENU 8 EXIT 9 SCAN 10 MUTE 11 INFO 12 AV-S 13 F1 14 15 AUDIO 16 SAT 17 TV/R 18 SYS 19 Compass 20 NEVIGATION KEY 21 0-9 FUNCTION Turn on/off meter Power indicator light 22kHz indicator light Vertical /Horizontal polarization voltage output light Signal lock indicator light Charger indicator light Show the main menu on the screen or jump back to previous menu in sub-menu setting conditions Escape from present menu and save the settings Shortcut key for DVB-S2 menu MUTE Channel information AV IN/OUT switch key Auxiliary function key Turn on/off Torch Audio type selection / Red key Shortcut key for Sat Installation menu TV/Radio switch key Shortcut key for System Setting menu Mechanical compass Volume Control or move cursor, channel or change, confirm etc Number key to select channels or enter programming 3 NO Description 22 RF 23 ANT 24 DC OUT 25 HDMI 26 AV OUT 27 AV IN 28 LED 29 USB 30 DC IN 31 Battery 32 Speaker FUNCTION Connect to satellite antenna cable Connect to antenna DC 12V output for extern equipment HDMI output port AV output port AV input port Torch USB port for software upgrading or multimedia playing Connect to power adaptor Battery Speaker integrated 4 English 2. OUTLINE · 4.3 Inch High Definition TFT LCD Screen · Fully DVB-S/S2/T/T2/C compliant · MPEG2, MPEG4, H.264/MPEG4 AVC, H.265/HEVC hardware decoding · Digital meter for signal strength and quality · Supports Auto Scan and Manual Scan · Sound and Light Alarm for Locking Signal · Auto Calculate Angle of AZ ,EL · Supports DISEQC 1.0/1.1/1.2, Unicable, 0/22kHz Tone · Speaker Integrated · Support both AV out and AV in · Support both HDMI out · LNB short protect · 7.4V/2600mAh Li-Ion Battery Included · Software upgrade via USB port · Easy to carry 5 3. THE MENU OSD INSTRUCTION If you have installed and connected the cables to the finder, pressing MENU to display the Main Menu. · DVB-S2 · DVB-T2 · DVB-C · Loop Search · Angle Calculation · Others · Multimedia · System Setting Press the keys of YZA B to move the cursor up or down in the menu interface, then use OK to confirm a selection. 3.1 DVB-S2 Select DVB-S2, then press OK into the Satellite Find Setup. 3.1.1 SATELLITE Press A B key into the satellite list. Use YZ key to move the cursor, then press OK to select the satellite you want. 3.1.2 LNB TYPE There are 4 types you can select: C Band/Ku Band/Unicable I/Unicable II. 3.1.3 LNB FREQUENCY Press AB key to switch LNB frequency you want. 3.1.4 TRANSPONDER Press AB key into the TP list. Use YZ key to move the cursor then press OK 6 English to select the TP you want. 3.1.5 FREQUENCY Frequency of the current transponder, input the value by using the number keys. 3.1.6 SYMBOL RATE Symbol rate of the current transponder, input the value by using the number keys. 3.1.7 POLARISATION Press AB key to change vertical or horizontal of polarization. 3.1.8 22KHZ Press AB key to turn on or off 22kHz TONE Switch. 3.1.9 DISEQC MODE Press AB key to set the type of port as None/DiSEqC1.0/1.1. 3.1.10 DISEQC TYPE & INPUT In C/Ku Band mode: we can press A B key to set DiSEqC 1.0/1.1 as A/B port, and set Tone Burst Mode as NONE/Tone Burst A/B. In Unicable mode: we can press A B key to switch IF Index from 1 to 8, or use number key to modify IF Freq, and then press A B key to select A/B as Sat Position. 3.1.11 LNB POWER Press AB key to Switch LNB Power ON/OFF. 3.1.12 BEEP TONE Press A B key to Switch beep tone ON/OFF. If we open it, the beep of lock alarm will open when we enter into the search screen. 7 3.1.13 QUICK SEARCH When parameters have been set done, press OK into quick search. There will have some signal information displayed on the screen. Press YZ key to change transponder. · Scan: Press the ENTER key to search the current TP. · Auto Scan: Press the red key to auto blind search the current satellite. 3.2 DVB-T2 Select DVB-T2, then press OK into the Scan Setup. 3.2.1 COUNTRY Press AB key to change the default country. 3.2.2 CHANNEL NO Press AB key to change the channel number. 3.2.3 FREQUENCY Frequency of the current channel, input the value by using the number keys. 3.2.4 BANDWIDTH Press AB key to change the bandwidth, we can select 5, 6, 7 or 8M. 8 English 3.2.5 MODE Press A B key to change the DVB standard, we have there types including T/T2/T+T2, you can select one you want. 3.2.6 ACTIVE ANTENNA Press AB key to switch antenna power ON/OFF. 3.2.7 LNB POWER Press A B key to change the antenna power, there are 3 types including 5V/12V/24V. 3.2.8 LCN Press AB key to switch LCN ON/OFF. 3.2.9 BEEP TONE Press A B key to Switch beep tone ON/OFF. If we open it, the beep of lock alarm will open when we enter into the search screen. 3.2.10 QUICK SEARCH When parameters have been set done, press OK into quick search. There will have some signal information displayed on the screen. · Scan: Press OK or red key to search current channel. · Auto Scan: Press green key to auto search the current channel. 9 · S/Q: Press blue key to enlarge showing of the signal strength and quality. 3.3 DVB-C Select DVB-C, then press OK into the Scan Setup. 3.3.1 COUNTRY Press AB key to change the default country. 3.3.2 CHANNEL NO. Press AB key to change the channel number. 3.3.3 FREQUENCY Frequency of the current channel, input the value by using the number keys. 3.3.4 STANDARD There are 2 types of standard you can select: J83.A/C and J83.B. 3.3.5 BEEP TONE Press AB key to switch beep tone. If we open the it, the beep of lock alarm will open when we enter into the search screen. 3.3.6 QUICK SEARCH Please refer to 3.2.10. 3.4 LOOP SEARCH We can see 8 TP or channels when we enter into this interface, and press OK to edit. There are 3 modes we can choose: DVB-S2, DVB-T2 and DVB-C. Press the red key to 10 English change. It will finish loop search after edition, then singal strenth and quality of each TP or channel will be displayed on the screen. 3.5 ANGLE CALCULATION Input satellite longitude, local longitude and latitude by number key, and device will calculate the polarization angle, azimuth and elevation on the top of the screen. 3.6 OTHERS · Channel Manager · Satellite List · Transponder List · Motor Setting · EPG 3.6.1 CHANNEL LIST · SAT Press F1 key to switch different channel list. · Lock Press YZ key to select programs we want to lock, then press the red key to lock them. · Del Press the green key to delete current channel. · Move Select a channel first, then press the orange key to move to other position. · Edit Press the blue key to confirm channels which need operating. 11 3.6.2 SATELLITE LIST All the satellite will be displayed on the screen. Press the red key to add a new satellite. Press the green key to edit current satellite. Press the orange key to delete current satellite. Press the blue key to scan current satellite. 3.6.3 TRANSPONDER LIST All the transponders under the current satellite will be displayed on the screen, and press A B key to switch satellite. Press the red key to add a new transponder. 12 English Press the green key to edit current transponder. Press the orange key to delete current transponder. Press the blue key to scan current transponder. 3.6.4 MOTOR SETTING There are 5 modes in motor setting: · USALS Controling motor according to your local position, you can modify it in Angle Calculation. · DiSEqC 1.2 There are 64 position you can select to move motor. · Set East Limit Move motor to east. · Set West Limit Move motor to west. · Disable Limits Unlimited movement. Press the red key to save setting. Press the green key to reset setting. 3.6.5 EPG Press YZ key to change program. If the current program has EPG information, it will appear on the right side of the window. Press A B key to change date of the EPG. 13 3.7 MULTIMEDIA Will need to play the files in the USB and insert it into the USB port. Select a file and press OK to play it. 3.8 SYSTEM SETTING · Language Press A B key to change the OSD language, default is English. · Country Press AB key to change the country. · Aspect Ratio Press AB key to change the aspect ratio: 4:3 LB/4:3 PS/16:9/full screen. · Video Resolution Press AB key to change the video output resolution: 480p/576p/720p/ 1080i/1080p. · HDMI Audio Press AB key to change the digital audio output format: PCM/RAW/MUTE. · Time Zone Press AB key to change the Time Zone. · System Lock Press AB key to switch system lock on/off. · PWR Unit Press AB key to change the PWR unit: dBm/dBuV/dBmV. · Torch Press AB key to switch torch on/off. · Back LED Press AB key to switch keyboard LED on/off. · KeyTone 14 English Press AB key to switch key tone on/off. · Speaker Press AB key to switch speaker on/off. · 12V Press AB key to switch DC 12V output on/off. · Upgrade Will upgrade the file into the USB, then insert the machine. Press OK to upgrade interface, use the direction key to select update file, and press OK to upgrade. Warning: Please don't turn power off or pull out the USB, otherwise it will damage the machine's software, and can't boot again. · Factory Reset Press OK to start factory reset. NOTE: if you set factory setting, all the user settings and the database will be reset. · Version Press OK to see some information about this hardware/software. · Save Channel - USB Save channel list to USB disk as default database. · Upgrade Channel - USB Restore channel list from USB disk as default database. 15 4. TECHNICAL SPECIFICATION TRANSMISSION STANDARDS DVB-S2/S, DVBT/T2, DVB-C SATELLITE INPUT/DEMODULATION Connector Type Input Frequency Signal Input Level Band Switch Control LNB Supply Demodulation Type Symbol Rate DVB-T/T2/C INPUT/DEMODULATION Connector Type Input Frequency Signal Input Level ANT Supply Demodulation Type LCD FEATURES LCD Type Number of Dots Active area (WxH) AV output interface Connector Type Video Output Audio Output HDMI output connecter Format AV input interface Connector Type Video Input Audio Input AUDIO/VIDEO PROCESSING Video decompression F Type 950 to 2150 MHz - 65 to -25 dBm 22KHz 13V/18V, IMax 400mA QPSK,8PSK,16APSK 2<Rs<45Mband(SCPC/MCPC) Female Type 48 to 862 MHz -79.5dBm (MAX) 5V, 12V/24V Imax 100mA QPSK,16QAM.64QAM,256QAM TFT Transmissive 480 (RGB) x 272 95.04x53.86 mm2 3.5 mm jack CVBS Stereo Audio L/R output HDMI 1.4 3.5 mm jack CVBS Stereo Audio L/R input MPEG-2 MP@HL, MPEG-1 Decoding,MPEG-4 ASP@L5 HD resolution,H.264 MP&HP@L4, H.265/HEVC,HW JPEG decoding 16 English Resolving rate Signal compatibility Video Format Audio Decompression Audio Output Mode DATA SERVICE PORT Connector Data Protocol File Management System File Format POWER SUPPLY Li-Ion Battery Adapter Power Consumption PHYSICAL CHARACERSTICS Size (W x D x H) Net Weight PAL-25 frame@720*576,NTSC-30 frame@720*480 Support conversion for different video formats 4:3,16:9,By Pan & Scan and Letter Box conversion MPEG-1 Layer I/II, MPEG-2 Layer I/II Stereo, Mono,R/L USB USB2.0 interface NTFS,FAT32,FAT16 wma,mp3,mp4,avi,jpg,jpeg,bmp,img 7.4V/2600mAh(The machine behind labeling shall prevail) OUTPUT :DC12V/1.2A, INTUPT :100~240VAC 50/60Hz(Will be subject to actual configuration) Max. 10W 17 x 12 x 4 (cm3) 1kg 17 5. TROUBLE SHOOTING Problem Possible Causes What To Do No display light up Power switch is not Check to make sure power on Run out of batteries on. Even on adapter No sound or picture, AV IN jack insert, but no but the front panel video input Pull out AV IN cable power light is ON. The satellite dish is not Adjust the dish. Check the No sound or picture pointing at the satellite. Signal Level in the Antenna Setup Menu Check the cable connections. LNB and other equipment No signal or weak signal connected between the LNB and the meter and adjust the dish. Bad picture/Blocking The satellite dish in not Adjust the dish. Error pointing at the satellite Signal is too strong Connect a signal attenuator to the LNB input Satellite dish is too small Change to a larger dish LNB noise factor too high Change to an LNB with lower noise factor The LNB is faulty Change the LNB AV out No The system is connected Check the UHF channel fixed picture(Video) by SCART cable and TV is in your system and tune the not in AV mode. UHF properly. Out of battery Even on adapter The key is not working Key blocks make sure no blocks between the front panel 18 USER'S MANUALAdobe InDesign CS6 (Windows) Adobe PDF Library 10.0.1