Gamemax GCR09 Gaming Chair

Introduction

Power Up with Gamemax, Gaming to the Max!

This document provides assembly instructions for the Gamemax GCR09 gaming chair.

Visit our website: www.gamemaxpc.com

Parts and How to Install

Parts List

Note: Parts I, J, and N from the original diagram were not clearly identifiable as separate components in the assembly steps and are omitted from the parts list for clarity.

Assembly Steps

1. Step 1: Attach Casters to Base

   Insert the five casters (A) into the five legs of the chair base (H).

2. Step 2: Install Gas Lift

   Insert the gas lift cylinder (B) into the center hole of the chair base (H). Place the gas lift cylinder cover (C) over the gas lift cylinder.

3. Step 3: Attach Mechanism and Armrests to Seat

   Secure the seat mechanism (D) to the underside of the seat cushion (G) using screws (L). Attach the armrests (E) to the sides of the seat cushion (G) using screws (L or P). Carefully lower the assembled seat onto the gas lift cylinder.

4. Step 4: Attach Backrest

   Align the backrest (F) with the seat assembly and secure it to the seat mechanism using screws (P).

5. Step 5: Attach Headrest

   Attach the headrest (K) to the top of the backrest (F).

6. Step 6: Final Assembly Check

   The chair is now fully assembled.

7. Step 7: Chair Profile View

   A side view of the assembled chair is shown.

8. Step 8: Reclining Function

   A view demonstrating the chair's reclining capability is shown.