Faroro PF31 Automatic Pet Feeder

Warranty

Thank you for purchasing the Faroro PF31 Pet Feeder. As a valued customer, you can extend your warranty to 36 Months by sending your ORDER SCREENSHOT via email to support@hifaroro.com and join our VIP Program!

We would appreciate it if you could share an HONEST REVIEW on Amazon about our pet feeder and your pets. We are sure that more consumers will be interested and enjoy your shared joy!

Please feel free to contact us with any problems or suggestions regarding this product.

Best regards,
Faroro Service Team

Explore More

• Email: support@hifaroro.com
• YouTube: Faroro Official
• Facebook: @farorosmartpetcare
• WhatsApp: 15112387776

JOIN US

How to Install PF31

1. Assemble the Bowl

Refer to the diagram for bowl assembly.

2. Choose Power Supply

Power can be supplied via the power adapter or 3 D-cell alkaline batteries. Ensure the power switch is set to "I" when using D batteries.

Diagram shows a power adapter and 3 D-cell batteries.

Quickly Setting Guide

1. Initial Settings

Press and hold the "Time" and "MIC" buttons to reset the feeder. You will hear a beep, "di, didi~".

Battery Indicator: Blinking: No Battery / Solid: Battery in use

Diagram shows the feeder's control panel with buttons for Breakfast, Lunch, Dinner, 4th Meal, On/Off, Meal Size, Hour, Minute, MIC, and Play. It also shows the LCD display with time and meal settings, and a battery indicator.

Keep and hold the "Manual" button for more than 1 second. The rotor will rotate 1 portion. Repeat this 3 times to check if the feeder is functioning normally.

Diagram shows the feeder's control panel again.

2. Time Setup

Keep and hold the "Time" button until the LCD shows a blinking "12:00" for time setup. Press the "Hour" button to set the current hour, and the "Minute" button to set the current minute. After setting the minute, press any button to exit time setup. (Long press to quickly adjust the time).

Example: Current time is 21:51

Diagram shows the transition of the time display from 12:00 to 21:51.

3. Breakfast Feeding Schedule Setup

• Keep and hold the "Breakfast" button until the screen blinks.
• Press the "On/Off" button to set whether to feed breakfast or not.
• Press the "Meal size" button to set the desired meal size. Meal size can be adjusted in 1/8-cup (10 g) increments, with a minimum portion of 1/8 cup (10 g) to a maximum portion of 5 cups (390 g).

NOTE: The feeder has two different dispensers for feeding portions: L size: 1-39 Portions (10-390g), S size: 1-39 Portions (5-195g).

• Press the "Hour" and "Minute" buttons to set the feeding time. After setting, press any button to save and exit breakfast setup.

NOTE: Long press "Meal Size", "Hour", "Minute" to quickly adjust the figure.

4. Repeat above steps for as many meals as you want to schedule.

5. Voice Recording and Playing

• Recording: Keep and hold the "MIC" button. You will hear "di", indicating you can start recording. You have 10 seconds to record your message, e.g., "Bobi, time to eat", close to the microphone. Release the button after recording.
• Play Your Recording: Keep and hold the "Play" button to replay your recording. (Animal hearing is more sensitive than human hearing, so the sound should not be too loud).
• Cancel Recording: Keep and hold the "MIC" button. When you hear "di", immediately release the button to cancel the recording.

Diagram shows the control panel with the "MIC" and "Play" buttons highlighted for voice recording.

How to Change to Small Food Dispenser

1. Take out the hopper.
2. Rotate 6 screws to remove the large food dispenser.
3. Place and screw the small food dispenser accordingly.

Diagram shows the large dispenser being replaced by the small dispenser.

NOTE: PF31 has 2 models (exchangeable food dispenser): (1) Model S: For Small and medium size pets. Programmable: 1 to 39 portions (5g-195g). (2) Model L: For Medium and large size pets. Programmable: 1 to 39 portions (10g-390g).

Q&A

Q1. My feeder didn't work well or the display is not clear?

A: If your problem occurs after a period of using, it is likely that the batteries are low. Please replace 3 new pieces D batteries.

Q2: Why the time on the display is not accurate?

A: If the feeder is powered off, the time will be reset and you will need to set it to the correct time. Replacing the battery, turning off the battery button, or other reasons can cause this problem.

Q3: How to check parameter I set?

A: When you keep pressing the “Breakfast” button, or the “Lunch” button, or the "Dinner” button, or the "4th" button, you can see the corresponding settings.