Sunrise Alarm Clock
This document provides instructions and specifications for the Sunrise Alarm Clock.
Product Overview
The Sunrise Alarm Clock is a multifunctional device designed to enhance your wake-up and sleep experience. It features a sunrise simulation, Bluetooth speaker, FM radio, white noise generator, and a dimmable light.
Specifications
- Bluetooth Version: V5.0
- Bluetooth Frequency: 2.4GHz
- Transmission Distance: Up to 10M
- Power Rating: 3W
- Power Supply: DC 5V
- Material: ABS
- Size: 150*150*40mm
- Charging Indicator/Reset Port
- USB Charging Port
- Desktop Stand
Device Layout and Controls
The device features several controls and indicators:
- Time Display: Shows the current time.
- Time Setting Button: Used to adjust the time.
- Alarm Clock Setting Button: Used to configure alarm times and sounds.
- Decrease Brightness Button: Reduces light intensity.
- Heat/Next Song/Color Light Switch Button: Cycles through songs, adjusts light color, or controls heating (functionality not detailed).
- Sleep/Pause Button: Activates sleep mode or pauses playback.
- Switch On/Off/Bluetooth/Acoustic/Natural Switching Button: Powers the device on/off, switches between Bluetooth, Acoustic (likely white noise), and Natural (likely FM Radio) modes.
- Increase Brightness Button: Increases light intensity.
- Previous Song Button: Selects the previous track.
- Speaker Grill: Where sound is emitted.
- Charging Indicator/Reset: Indicates charging status and allows device reset.
- USB Charging Port: For powering the device.
- Desktop Stand: Supports the device.
Getting Started
Initial Charging: Before first use, connect the product to a compatible USB charging port for 4-5 hours. This ensures optimal battery performance.
Resetting the Device: If buttons are unresponsive, press and hold the 'reset' button for 5 consecutive seconds to restore default factory settings.
Dormant State: When the product is in a dormant state (e.g., screen off), touch any key to display the time for 10 seconds before returning to dormant mode.
Functionality
Mode Switching
Power On/Off: Press and hold the MODE button for a few seconds to turn the item on or shut it down.
Mode Selection: Briefly press the MODE button to cycle through modes:
- White Noise Mode (NS): The display shows the NS sign. Use the '+/-' buttons to select one of 12 built-in white noise tracks.
- Bluetooth Mode (BT): The display shows the BT sign. Connect a compatible Bluetooth-enabled device to play music. Use '+/-' buttons to select songs and hold '+/-' to adjust volume.
- FM Radio Mode (FM): The display shows the FM Radio sign. Connect the charging cable to the Micro USB input (the other end does not need to connect to a power source). The product will automatically search and save radio stations. Use '+/-' buttons to change channels.
Light Functions
- First Press: Turns on a warm white light. Adjust brightness using the '+/-' buttons.
- Second Press: Enters breathing lamp mode. Press the button to manually adjust light color or allow automatic color changes every 10 seconds.
- Third Press: Turns off the light.
- Wake-up Light: The wake-up light activates 30 minutes before the alarm rings. Press and hold for 3 seconds to turn off the light.
Sleep Support Function
Briefly press the sleep support button to enter sunset sleep lamp mode. The timer can be set for 30, 60, or 90 minutes. After the set time, the lights will slowly dim, and the radio or music playback will turn off automatically.
Alarm Clock Settings
Setting Time: Adjust hours and minutes by briefly pressing the '+/-' button.
Configuring Alarm:
- When the device is in standby mode, briefly press the alarm clock setting button (indicated by a clock icon). The Clock and Minutes will start flashing.
- Press '+/-' to adjust the time.
- Press the button again to enter white noise settings. Use the '+/-' buttons to select your preferred sound (NS 01 to NS 12) for the alarm.
- Press and hold for a few seconds to confirm the settings.
Sunrise Simulation: When enabled, the sunrise light will slowly turn on 30 minutes before the alarm rings.
Canceling Alarm: Hold down the alarm clock setting button (clock icon) until it disappears from the display.
Snooze Function: When the alarm rings, press the snooze button (likely the Sleep/Pause button or a dedicated snooze button) to snooze the alarm for nine minutes. If the alarm rings for 3 minutes without any button press, the device will automatically enter sleep mode.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information: The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.