Whirlpool Washer Dryer Quick Start Guide

Product Description

The appliance features a control panel with various buttons and a program selector knob. Key components include:

• Piano (Top)
• Cassette detersivi (Detergent drawer)
• Pannello comandi (Control panel)
• Maniglia (Handle)
• Oblò (Door)
• Filtro dell'acqua - dietro zoccolo (Water filter - behind plinth)
• Zoccolo (amovibile) (Plinth (removable))
• Piedini regolabili (2) (Adjustable feet (2))

The control panel includes:

• Tasto On/Off (On/Off Button)
• Manopola Programmi (Program Knob)
• Tasto Blocco Tasti (Key Lock Button)
• Tasto Tipo Asciugatura (Drying Type Button)
• Tasto Solo Asciugatura (Drying Only Button)
• Tasto Temperatura (Temperature Button)
• Tasto Centrifuga (Spin Button)
• Tasto Avvio Ritardato (Delay Start Button)
• Tasto Rapido (Rapid Button)
• Tasto Extra Risciacquo (Extra Rinse Button)
• Tasto FreshCare+ (FreshCare+ Button)
• Display
• Tasto Avvio/Pausa (Start/Pause Button)

First Use

Upon first use, you will be prompted to select a language. Press buttons C and O to navigate and button 1 to confirm. To change the language later, turn off the machine, press and hold buttons ? and C simultaneously until an acoustic signal is heard, then follow the on-screen prompts.

To adjust display brightness (default is medium), turn off the machine, press and hold buttons ? and A simultaneously until an acoustic signal is heard. Use buttons C and O to select brightness and button 1 to confirm.

Detergent Drawer Compartments:

• Prelavaggio (Pre-wash): Detergent for pre-wash.
• Lavaggio principale (Main wash): Detergent for main wash, stain remover, limescale remover.
• Ammorbidente (Softener): Softener, liquid starch. Do not exceed the "max" level.

A partition (A) is provided for liquid detergent. For powder detergent, place the partition in cavity B.

First Wash Cycle

To remove any production residues:

1. Select the "COTTON" program at 60°C.
2. Add a small amount of powder detergent to the main wash compartment (max. 1/3 of the recommended dose for lightly soiled items).
3. Start the program with an empty drum.

Daily Use

1. Load Laundry: Prepare laundry according to "Tips and Suggestions." Open the door and load laundry, respecting the maximum load capacity indicated in the Program Table. Close the door firmly until it clicks, ensuring no laundry is caught between the glass and the rubber seal.
2. Open Water Tap: Ensure the washer dryer is connected to the water supply and open the tap.
3. Turn on Washer Dryer: Press button (1). The indicator light ? will flash slowly.
4. Select Program and Customize Cycle: The appliance can perform:
   • Only Wash
   • Wash and Dry
   • Only Dry

Only Wash:

Select the desired program using the PROGRAM knob. The display will show the cycle name and duration. The default temperature and spin speed will be shown. Use the respective buttons to adjust temperature (press ? to decrease, up to cold wash) and spin speed (press ? to decrease, up to no spin). Pressing the buttons again will restore the maximum settings. Select desired options by pressing the corresponding button; the indicator light will turn on. Press again to deactivate.

Note: If an option is not compatible with the selected program, an error sound will be heard, and "Non Selezionabile" (Not Selectable) will be displayed.

Wash and Dry:

Ensure the load matches the maximum drying capacity for the selected program (refer to the Program Table). Follow the "Only Wash" instructions to select and customize the program. Press the ? button to select the drying type: automatic or timed.

• Automatic Drying Levels: The washer dryer will dry until the set level is reached. Pressing ? cycles through levels: Extra Dry, Cupboard Dry (1), Hang Dry ?, Iron Dry ?.
• Timed Drying: Press ? repeatedly until the desired time (30 to 180 minutes) is displayed.

For loads exceeding the maximum drying capacity, remove some items after the wash cycle before starting the drying phase. Follow instructions for "Only Dry.". A cooling phase always occurs at the end of drying.

Only Dry:

If you want to dry a load washed previously (by the machine or by hand):

1. Select a program suitable for the fabric type.
2. Press the ? button to perform only drying, excluding the wash phase.
3. Select the desired drying type (automatic levels or timed) as described above.

Note: A cooling phase always occurs at the end of drying.

5. Dose Detergent: Extract the drawer and add detergent as explained in "Detergent Drawer." (Only for wash or wash + dry cycles).

6. Delay Start: Refer to the "Options and Functions" section.

7. Start Program: Press the START/PAUSE button ? (1). The door locks (? symbol turns off) and the drum rotates. The door unlocks (? symbol turns on) and locks again (? symbol turns off). The click sound is from the door locking mechanism. Water fills the drum, and the wash phase begins.

To change a program mid-cycle, pause by pressing START/PAUSE (light flashes amber), select the new cycle, and press START/PAUSE again. To open the door mid-cycle, press START/PAUSE; if the ? symbol turns on, the door can be opened. Press START/PAUSE again to resume.

8. Cancel Program: Press and hold the ? button until the washer dryer turns off. If the water level and temperature are low, the door unlocks. If water remains, the door stays locked. To unlock, turn on the machine, set SPIN & DRAIN program without spin (set to "- -"), drain the water, and the door will unlock.

9. Turn off Washer Dryer: "End cycle" will be displayed. The door can be opened when the ? symbol turns on. Open the door and unload laundry. Press ? to turn off. For energy saving, the machine will turn off automatically after about 10 minutes if not manually switched off. Leave the door slightly ajar to allow the interior to dry.

Tips and Suggestions

• Sort Laundry: By fabric type (cotton, mixed fibers, synthetics, wool, hand-wash items), color (separate colors from whites, wash new colored items separately), and delicates (small items like nylon socks, items with hooks like bras should be placed in a fabric bag).
• Empty Pockets: Remove coins, lighters, and check buttons, as they can damage the appliance and drum.
• Follow Dosage Recommendations: For optimal cleaning, avoid detergent residue, and save by preventing excess usage.
• Use Low Temperatures and Longer Durations: Energy-efficient programs typically use lower temperatures and longer cycle times.
• Respect Load Sizes: To save water and energy, do not exceed the maximum load capacity indicated in the "PROGRAM TABLE."
• Noise and Residual Moisture: These are influenced by the spin speed; higher spin speeds result in lower residual moisture.

Washing Symbols on Garment Labels

The symbol in the tub indicates the maximum washing temperature.

• ?: Normal mechanical action
• ?: Reduced mechanical action
• ?: Extremely reduced mechanical action
• ?: Hand wash only
• ?: Do not wash

Maintenance and Cleaning

Always turn off and unplug the machine before cleaning. Do not use flammable liquids. Clean and maintain the washer dryer periodically (at least 4 times a year).

• External Cleaning: Use a soft, damp cloth. Do not use general cleaners, glass cleaners, abrasive powders, or similar substances on the control panel, as they can damage printed parts.
• Water Inlet Hose Check: Periodically check the hose for integrity. If damaged, replace it with a new one from authorized service centers or specialized retailers. If the hose has a transparent coating, check for darker colored areas, which may indicate a leak.
• Water Filter / Residual Water Drain Cleaning: If a high-temperature wash was used, wait for the water to cool before draining. Clean the filter regularly to prevent blockages. Remove the plinth using a screwdriver. Place a shallow container under the filter to collect residual water. Slowly turn the filter counter-clockwise to drain water. Close the filter, empty the container, and repeat until all water is drained. Place a cotton cloth under the filter to absorb residual water. Remove the filter by turning counter-clockwise. Clean the filter under running water. Reinsert the filter by turning clockwise until it stops, ensuring the handle is vertical. Pour about 1 liter of water into the detergent drawer to test for leaks. Reinstall the plinth.
• Detergent Drawer Cleaning: Press the release button and pull out the drawer. Remove the insert from the drawer and the softener compartment. Clean all parts with running water, removing detergent or softener residue. Dry with a soft cloth. Reinstall the drawer.

Energy Saving and Environmental Protection

• Adhering to load limits optimizes energy, water, and detergent consumption, as well as wash duration.
• Do not exceed recommended detergent dosages.
• For energy savings, choose a 60°C program instead of 90°C, or a 40°C program instead of 60°C. For cotton items, the "ECO 40-60" program is recommended for lowest consumption.
• To save energy and time when drying, select the maximum selectable spin speed to reduce the amount of water retained by the clothes.

Program Table

Maximum Load: 10 kg. Energy consumption in Off mode: 0.5 W / Standby mode: 8.0 W.

Key: Selectable / Optional - Not selectable / Applicable - Dosage required - Optional dosage

6th Sense: Sensor technology adjusts water and energy consumption and program duration to the actual load. For wash programs above 50°C, powder detergent is recommended. Follow detergent packaging instructions. * Selecting the SPIN & DRAIN program with spin set to "~" performs only draining. ** Program duration is shown on the display. *** At the end of the program executed with the maximum selectable spin speed, with default settings. The cycle duration displayed is an estimate; actual time may vary based on water pressure, ambient temperature, detergent amount, load size and type, load balance, and selected options. Values for programs other than Eco 40-60 are indicative.

1) Eco 40-60 (Wash & Dry): Test cycle in accordance with EU Ecodesign regulation 2019/2014. Most water and energy efficient program for washing normally soiled cotton items. Note: displayed spin speed values may differ slightly from table values. 2) Eco 40-60 (Drying): Test drying cycle in accordance with EU Ecodesign regulation 2019/2014. To start the wash and dry cycle, select the "Eco 40-60" wash program and set the drying option level to "11". Most water and energy efficient program for washing and drying normally soiled cotton items. Items can be stored immediately after the cycle. For test institutes: 2) Long cotton program: set COTTON program at 40°C. 3) Long synthetic program: set SYNTHETICS program at 40°C.

Program Descriptions:

• MIXED: For durable cotton, linen, synthetic, and mixed fabrics, lightly to moderately soiled.
• WHITES: For towels, underwear, tablecloths, bedding, etc., in durable cotton and linen, normally to heavily soiled. At 90°C, a pre-wash phase is included; add detergent to both pre-wash and main wash compartments.
• COTTON: For towels, underwear, tablecloths, etc., in durable cotton and linen, moderately to heavily soiled.
• ECO 40-60: For normally soiled cotton items washable at 40°C or 60°C in the same cycle. This is the standard cotton wash program and the most efficient in water and energy consumption.
• DELICATES: For particularly delicate garments. Turn garments inside out before washing.
• SYNTHETICS: For synthetic fibers (e.g., polyester, polyacrylic, viscose) or cotton blends, moderately soiled.
• DUVET: For items with feather padding such as duvets, pillows, and down jackets. Fold duvets inwards and do not exceed 3/4 of the drum capacity. Use liquid detergent for optimal results.
• STEAM REFRESH: Refreshes garments by removing odors and relaxing fibers using steam. Garments will be damp at the end of the cycle.

Options and Functions

If an option is not compatible with the program, an error sound will be heard, and "Non Selezionabile" (Not Selectable) will be displayed.

• FRESHCARE+: Enhances wash cycles by generating steam to inhibit odor-causing bacteria (wash only). After the steam phase, gentle drum rotations occur. For drying cycles, it prevents stubborn creases through slow drum rotations. The FRESHCARE+ cycle lasts up to 6 hours and can be interrupted by pressing any button or turning the knob. Wait about 5 minutes before opening the door.
• SPIN & DRAIN: For spinning and draining water. For durable items.
• RINSE & SPIN: For rinsing and spinning. For durable items.
• RAPID 30': For lightly soiled items, washes in 30 minutes, saving energy and time. Maximum load 5.5 kg.
• 20°C: For lightly soiled cotton items at 20°C.
• JEANS: Wash garments inside out and use liquid detergent.
• WOOL: Suitable for all wool garments, including those labeled "hand wash only." Use specific detergents and do not exceed the maximum load.
• WASH & DRY 45' (WASH & DRY in 45'): Washes and dries lightly soiled items (Cotton and Synthetics) in 45 minutes. Maximum 1 kg load.
• WASH & DRY 90' (WASH & DRY in 90'): Washes and dries items (Cotton and Synthetics) in 90 minutes. Maximum 2 kg load.
• EXTRA RINSE: Allows selection of rinse type for sensitive skin. Pressing the button cycles through "Extra +1", "Extra +2", and "Extra +3" rinses to remove detergent traces. Cycles at 40°C help remove allergens like pet hair and pollen; temperatures above 40°C provide excellent anti-allergic protection. Press the button again to return to "Normal Rinse."
• RAPID: Reduces wash duration by up to 50% depending on the cycle, saving water and energy. Suitable for lightly soiled items.
• DELAY START: Press the button repeatedly to set the desired delay time. Press until "- h" appears on the display to cancel.
• KEY LOCK: Press and hold the ? button for about 2 seconds to activate. "BLOCCO TASTI ATTIVO" (Key Lock Active) will appear on the display. This prevents accidental program changes, especially with children around. To deactivate, press and hold the ? button for about 2 seconds.

Further Information

Regulatory documentation, standard documentation, spare parts ordering, and other product information can be found:

• By visiting our website: docs.whirlpool.eu and parts-selfservice.whirlpool.com
• By using the QR code.
• By contacting Customer Service (phone number on the warranty booklet). When contacting Customer Service, provide the codes from the product's rating plate.
• For more information on repair and maintenance, users are invited to visit the website: www.whirlpool.eu

Model information can be retrieved using the QR code on the energy label. The label also includes the model identifier for consulting the portal at https://eprel.ec.europa.eu.