Govee Aura Table Lamp User Manual

Safety Instructions

• Read and follow all safety instructions.
• The lamp is not waterproof. Avoid exposing it to splashing or dripping water.
• Operating temperature: -10° to 45°C (14° to 113°F).
• The lamp's internal light source cannot be replaced. Replace the entire lamp if it breaks.
• Do not allow children to install the lamp alone.
• Use only the provided Type-C cable for charging. Do not use it to charge other devices.
• Do not install the lamp with a dimming driver.
• Avoid installing the lamp near heat sources.
• Avoid installing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thank you for choosing the Govee Aura Table Lamp. This lamp emits warm, vibrant colors to help you sleep peacefully or awake gently, and features incredible lighting effects. With smart voice control, you can control your lighting hands-free.

What You Get

• Table Lamp (1)
• Control Box (1)
• Adapter (1)
• User Manual (1)
• Service Card (1)

At a Glance

The control box features several buttons for operating the lamp:

• On/Off Button: Press to power the lamp On/Off.
• Brightness+: Press to increase the brightness.
• Brightness-: Press to decrease the brightness.
• Music Mode: Press to cycle through four music modes.
• Switch Button: Press to change light colors. Long press to change color modes.

Diagram Description: The control box is depicted with distinct buttons labeled for On/Off, Brightness Up, Brightness Down, Music Mode, and Switch.

Installing Your Device

1. Connect the adapter to the control box using the DC charging port.
2. Insert the other end of the cable into the Type-C charging port on the lamp.
3. Power on the adapter.

Diagram Description: The installation involves connecting the power adapter to the control box via a DC port, and then connecting the control box to the lamp via a Type-C port.

Pairing Your Device with the Govee Home App

What you need:

• A Wi-Fi router supporting 2.4GHz and 802.11 b/g/n bands (5GHz is not supported).
• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Open the app, tap the "+" icon in the top right corner, and search for "H6052".
3. Tap the device icon and follow the on-screen instructions to complete pairing.

App Store Links:

Download on the App Store

GET IT ON Google Play

Specifications

Troubleshooting

1. Cannot connect to the Govee Home app.

• Check if the device is powered on.
• Ensure Bluetooth on your smartphone is enabled, or try connecting with another smartphone.
• When connecting for the first time, ensure the smartphone is near the device.
• If the connection error persists, delete the connected device from "My Devices" in the app and reconnect by following the setup instructions.

2. Wi-Fi disconnected or failed to connect?

• Check if the device is powered on.
• Do not skip Wi-Fi connection steps during device pairing.
• Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
• Verify you entered the correct Wi-Fi password during setup.
• Try pairing with another smartphone to confirm your network is working correctly.
• Shorten the distance between the device and the Wi-Fi router to less than 50ft, then attempt reconnection.

3. Cannot connect to Alexa or Google Assistant.

• Ensure the Wi-Fi connection is stable and functioning properly.
• Go to "User Guide" on the app's Settings page to re-pair the device.

4. Can multiple users control one device?

• Each device can only be controlled by one account.
• If multiple users need to manage the same device, ensure they all use the same account.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support
• Email: support@govee.com
• Official Website: www.govee.com
• Social Media: @Govee, @govee_official, @govee.official, @Govee.smarthome

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.