Midea Inverter Cooling Fan FS40-19PRD Owner's Manual

Safety Precautions

CAUTION: Read Rules for Safe Operation and Instructions Carefully.

WARNING

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard.
• For indoor use only.
• To protect against the risk of electrical shock, do not immerse the unit, cord, or plug in water or other liquid.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
• When the appliance is not in use and before cleaning, unplug the appliance from the outlet.
• Once the fan is assembled, the rotor blade guard shall not be taken off anymore.
• Correct Disposal of this Product: ? This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

RULES FOR SAFE OPERATION

• Never insert fingers, pencils, or any other object through the grille when the fan is running.
• Disconnect the fan when moving it from one location to another.
• Ensure the fan is on a stable surface when operating to avoid overturning.
• DO NOT use the fan in a window; rain may create an electrical hazard.
• Household use only.

Installation Instructions

Name of Components

• Motor
• Pole
• Base
• Right-angle bolt
• Rear grill

Base Installation

Align the column with the groove on the base and fix them together using a right-angle bolt. (Diagram shows the base, pole, and bolt, indicating alignment and tightening.)

Considerate Hint: Remove parts from the component before performing installation.

Assembly Steps:

1. Connect the pole to the base using the right-angle bolt.
2. Tighten the knob to secure the pole.
3. Align and attach the motor assembly and rear grill.

Front and Rear Guard Installation

Align the catch of the front guard with the illustrated position of the rear guard. Press the guards sequentially with both hands to secure them. (Diagram shows alignment and sequential pressing for self-catch installation.)

Blade Installation

• Lock nut of blade: Turn the lock nut anticlockwise, then install the front fan cover.
• Blade: After installing the blade, rotate it to ensure it can rotate normally.
• Lock nut of grill: Screw the lock nut of the grill clockwise to fix the rear grill.

Instructions for Use

Remote Controller Operation

The remote controller has the following keys:

• ON/OFF key: Powers the fan on or off.
• Speed key: Adjusts the fan speed.
• Osc key: Controls the oscillation function.
• TIMER key: Sets the timer function.

Battery Information: Uses one AAA Battery, 1.5v. (Diagram shows battery orientation.)

Considerate Hint: The remote control is effective within a 5-meter distance and a 30-degree deflection in front of the product. Use manganese or alkaline batteries of type "AAA". Do not use rechargeable batteries.

Body Operation

The fan can also be controlled directly from the unit:

• On/off button: Powers the fan on or off.
• Wind speed button: Selects the fan speed.
• Oscillating button: Controls the oscillation function.
• Timing display: Shows the set timer duration.
• Wind speed display: Shows the current fan speed setting.

Height Adjustment: Turn the height adjustment knob counterclockwise and loosen it to perform height adjustment. (Diagram shows turning the knob.)

Maintenance and Cleaning

Maintenance Instruction

The fan requires little maintenance. Do not attempt to fix it yourself; refer it to qualified service personnel if service is needed.

• Before cleaning and assembling, ensure the fan is unplugged.
• To ensure adequate air circulation to the motor, keep the vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
• Wipe the exterior parts with a soft cloth soaked in a mild detergent.
• Do not use any abrasive detergent or solvents (such as gasoline or thinner) to avoid scratching the surface.
• Do not allow water or any other liquid into the motor housing or interior parts.

Cleaning

• Ensure the fan is unplugged from the electrical supply source before cleaning.
• Clean plastic parts with a soft cloth moistened with mild soap. Thoroughly remove any soap film with a dry cloth.